pipes and forged used for sale

Ring-open-end wrench set 25-pcs. 6-32 mm, DIN 3113A, CV, unused Auction-ID: A1-40418-263

Stahlkaiser professional stitch ring ratchet set 6-32mm Auction-ID: A1-40418-265

Auction-ID: A1-46501-3094

A bundle: 10 pieces 5 meters long, simple; 5 pieces 3 meters long, simple; 5 pieces 1 meter long, triple Auction-ID: A1-46501-986

60 litres, 1500 watts, unused Auction-ID: A1-40418-314

Auction-ID: A1-46501-1590

Bosch professional. Cordless - Hand-held circular saw. 18 V including a 5 AH battery incl. charger including instruction manual and an Expert saw blade LongLife, Clean, Cut – new L-Box Bosch Auction-ID: A1-46501-2581

KVH as good as new 80 x 120 x 2500mm 120 x 120 x 1700mm Auction-ID: A1-46501-2644

Loba Sanding Pads for Parquet Treatment 406 x 10mm Special Pad beige and Remnants Mixed Lot Auction-ID: A1-46501-2616

The Grass Dynapro pull-out runner with manufacturer number F130107823 is a high-quality underfloor full pull-out for wooden drawers. Here are the key specs: Nominal length (NL): 520 mm Load capacity (load capacity): 40 kg Pull-out type: Full extension (the drawer can be pulled out completely) Damping system: Soft-close (for soft, quiet closing) Adjustment option: Usually 3D adjustment (height, side, inclination) integrated Mounting: Floor mounting (underfloor) Auction-ID: A1-46501-2607

17 pcs Spanner set, extra long wrenches, high quality, 8-32mm, in case Auction-ID: A1-40418-266

Equipped with a designer spa; new price 14990,-; touchscreen display (Margin, no VAT) Auction-ID: A1-40111-112

Auction-ID: A1-46501-2132

automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-244

Scope of delivery: 1x M18 FUEL™ cordless nailer (brushless). 2x M18 B2 battery packs (18V, 2.0 Ah Li-ion). 1x M12-18 FC fast charger. 1x HD box (sturdy system case). Technical key data: Nail type: Upset head nails (1.2 mm diameter) with lengths ranging from 16 mm to 54 mm. Technology: \"Ready-to-Fire\" technology for immediate firing with no start-up time. Maintenance: Does not require gas cartridges; the impact force is generated by an internal nitrogen cartridge Auction-ID: A1-46501-1603

2 bands, brush Instruction manual included Air shoes defective Electronics need to be repaired Veneer and varnish sanding only possible after overhaul and recalibration With blower without suction flaps Many replacement sanding belts of different grits Auction-ID: A1-46501-2084

qty 29 pcs Auction-ID: A7-46448-59

FÖRCH VaroBoxx with blind riveting pliers and rivet assortment identical to Sortimo L-Box Auction-ID: A1-46501-1552

Auction-ID: A1-46501-2098

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note color is stone motif as in the first photo) (note furniture not included) (note this model does not have a glass wall on the left side wall photos are for illustration, inside it is exactly the same) (transport dimensions 590x220x248 cm, weight 3500 kg) Auction-ID: A1-40111-9

Auction-ID: A1-40137-206

Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. excavator bucket, unused machine Auction-ID: A1-40418-12

A bundle: 2 pieces 25 meters long, simple; 3 pieces 10 meters long, simple; 3 pieces 10 meters long, triple Auction-ID: A1-46501-1560

approximately 1000 allen bolts and 1000 stainless steel body rings Auction-ID: A1-46359-10000

Förch assortment electrical assembly including Knipex tool in L-Box Auction-ID: A1-46501-3091

Dürr Dental dry suction with control box and wall bracket Auction-ID: A7-46327-6

Screw shelf 3.1m wide 2.55m high Content: Würth and Förch screws in different sizes Suspension rails carpenter's chip Metric Screws Various dowels Without pallet rack frame Auction-ID: A1-46501-2159

Scope of delivery: 1x M18 FUEL™ cordless nailer (brushless). 2x M18 B2 battery packs (18V, 2.0 Ah Li-ion). 1x M12-18 FC fast charger. 1x HD box (sturdy system case). Technical key data: Nail type: Upset head nails (1.2 mm diameter) with lengths ranging from 16 mm to 54 mm. Technology: \"Ready-to-Fire\" technology for immediate firing with no start-up time. Maintenance: Does not require gas cartridges; the impact force is generated by an internal nitrogen cartridge Auction-ID: A1-46501-1644

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-167

17 pcs Spanner set, extra long wrenches, high quality, 8-32mm, in case Auction-ID: A1-40418-146

Unchecked from practice Closure Auction-ID: A7-46327-77

automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-149

Blum Pot Hinges + Mounting Plates Häfele Symo locks, cylinder cores, Keku Connectors Minifix Neatly packed and sorted ,…. Auction-ID: A1-46501-2167

A bundle: 10 pieces 5 meters long, simple; 5 pieces 1 meter long, simple; 2 pieces 2 meters long, simple; 5 pieces 3 meters long, simple; 5 pieces 1 meter long, triple Auction-ID: A1-46501-1534

Good condition Auction-ID: A7-46327-146

Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. bucket and spoon board, unused machine Auction-ID: A1-40418-310

A bundle of rubber cables consisting of 1 piece approx. 22-25 meters long, simple; 4 pieces about 10 meters long, 1 piece 4m 3-fold, 1 piece about 3m Auction-ID: A1-46501-1528

3 pieces 6-way power strip high quality with switch and mains filter - cable 3m long Auction-ID: A1-46501-1584

Set consisting of, machinist's hammer 4kg, axe 2000 grams, and splitting axe 2200 grams. unused Auction-ID: A1-40418-308

Profile milling system for tongue and groove connections e.g. parquet, wall cladding,... Auction-ID: A1-46501-2064

batteries: 4x Pylontech FH48074 H1 3.55 kWh BMS: Pylontech FC0500-40S-B management solar panels: 24x JA Solar JAM54D41 (450 wp) Full Black and glass/glass inverter: Goodwe Hybrid Inverter 10K (3 phase) total power: 10,800 Wp power: 450 Wp per solar panel Condition: New Auction-ID: A1-46359-3

Wet and dry vacuum cleaner, unused in box Auction-ID: A1-40418-194

Festool Domino DF 500 Q-Plus Set with DS 4/5/6/8/10 Dowel Set and Spare Dowel - Milling machine with all stops in Systainer -Replacement milling cutter - Dowel set Systainer DS 4/5/6/8/10 1060 BU - approx. 3500 dowels in a cardboard box Auction-ID: A1-46501-800

Assortment DIN 7985 and 934 screws in orange plastic box Systra Module Auction-ID: A1-46501-3092

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

turning diameter:65 mm turning length:120 mm control:Index C200-4D SL z-axis main spindle travel:390 mm z-axis subspindle travel:390 mm x-axis subspindle travel:600 mm Travel Y1:± 80 mm Travel y2:± 80 mm x-axis rapids:45 m/min y-axis rapids:15 m/min z-axis rapid travel:45 m/min Spindle 1 RPM:5000 1/min Spindle 1 Power:35,5/27,5 kW Spindle 1 Torque:170 /125 Nm Spindle 2 RPM:5000 1/min Spindle 2 power:35,5/27,5 kW Spindle 2 torque:170/125 Nm c-axis:0,00014 ° bar material dia.:65 mm spindle nose:AD 140 spindle bore:85 mm Milling spindle 1 RPM:18000 1/min Milling spindle 1 power:11 kW Milling Spindle1 torque:19 Nm Milling spindle 2 RPM:18000 1/min Milling Spindle 2 power:11 kW Milling spindle 2 torque:19 Nm B-axes swivel angle:230 ° B-axes torque:440 Nm B-axes angle resolution:0,001 ° Milling spindle 1 & 2 tool magazine:80 HSK A40 Milling spindle 2 tool magazine static tools :6 x VDI 25 ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:670 mm turning length:1540 mm control:F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover:700 mm Travel turret No.1 (milling spindle) x/y/z:495 / ± 150 / 1562(+164) mm Rotation B-axis:-30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/40 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:20,2/18,8 kW Torque of milling spindle:120 / 44 Nm tool taper milling spindle:Coromant Capto C6 Tool magazine for milling spindle (turret 1):76 Tool change time tool/tool, milling spindle:1,25 s Spindle 1 RPM:3000 1/min Spindle 1 Power:36 / 30 / 25 kW C-axis spindle 1:0,001 ° Bar capacity spindle 1:102 mm Spindle 2 RPM:4000 1/min Spindle 2 power:26 / 22 / 15 kW C-axis spindle 2:0,001 ° Bar capacity spindle 2:80 mm dimensions of the machine ca.:7,8 x 3,6 x 2,9 m Linear scales on axis:X, Y programmable steady:KLU-A530 & SLU-X3.2 Spindle 1 ...