pipes and forged used for sale

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2500 x 900 x 1750 mm, Weight: 345 kg

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

Belt width: 600 mm, Direction: 90 degrees right hand side, Radius: 1150 mm, Power: 3 x 380V, 50Hz, 0.18kW

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Platform height: 600 mm, Steps: 2 pieces, Dimensions: 2100 x 750 x 1700 mm

Belt width: 1100 mm, Grill length: 11000 mm, Heating: thermic oil, Cooking time: 3 - 50 min., Max. temperature: 250 degrees Celsius, Power: 25 kW, Dimensions: 12825 x 1740 x 2323 mm, Weight: 10000 kg

Belt width: 650 mm, Flip-over: 90 - 200 mm, Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2100 x 1300 x 1450 mm

Line is consisting of:, Handtmann portioning device for ground meat, Type: GMD99-2, Serial number: 1189, Year of construction: 2005, Air pressure: 7 Bar, Tramper denester, Type: D-3100, Serial number: 002, Year of construction: 2011, Capacity: 20 - 30 cycles/min., Dye: 5x R24, 3x R15, Air pressure: 6 Bar, Dimensions: 3250 x 2200 x 2000 mm, Weight: 310 kg, Tramper tray filling system, Type: TAS01, Serial number: 001, Year of construction: 2011, Dimensions: 5200 x 850 x 1600 mm, Weight: 900 kg, Tramper traysealer, Type: S-460, Serial number: 001, Year of construction: 2012, Trays: R15 & R24, Capacity: max 15 cycli/min., Air pressure: 6 Bar, Dimensions: 3100 x 1450 x 2150 mm, Including 2 tool trolleys, For vacuum and gas flush, Including Witt gas mixing station

With flipover conveyor in the middle, Including welding trolley, Belt width: 1100 mm, Cooking length: 10000 mm, Heating: thermal oil, 189kW + electric, 128kW, Exhaust: 1000 m³/h, Steam: 3 - 7 Bar, Compressed air: 6 Bar, 12 l/min, Water: 15,4 l/min for belt washer, Power: 3 x 400V, 50Hz, 168kW, Dimensions: 10000 x 2200 x 2450 mm

Terlet Terlotherm Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. This model is special designed for working under higher pressures. Patent under no. 1006155. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 45 liter. Number of scraper rows: 4. Inner vessel: 20 Bar - 200 °C - 45 liter. Jacket: Steam 8 Bar / Water 4 Bar - Steam 175 °C / Water 100 °C - 30 liter. Motor: 5,5 kW - 1.464 / 369 rpm - 400 V - 50 Hz - 10,5 A. Total height: 277 cm., Type of Machine: Scraped ...

Including continuous belt washerSiemens Simatic S7 control panel, Belt width: 700 mm, Belt length: 12500 mm, Max. product height: 180 mm, Heating: steam, Cooking time: 3 - 18 min., Power: 3 x 400V, 50Hz, 26kW, Dimensions: 14600 x 2400 x 4400 mm, Weight: 9500 kg

MAX DIAMETER 320 , MAX LENGTH 500

A Deckel engraving and copy milling machine is available. Table dimensions X/Y: 350mm/200mm, travel X/Y: 300mm/150mm, machine dimensions X/Y/Z: approx. 1100mm/1300mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -tiltable: hydraulically -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Dough divider / ciabatta plant ZELAIETA, type: Hydrapate TXA-AUT-ROLL -In very good condition- For making bread with a high percentage of 70 - 90% water, such as classic ciabatta, basto, baguette, rustic bread, rustic bread with pointed ends, mini bread, etc. - Ideal for ciabatta due to gentle dough processing and long resting times - Lamination and lengthening of the dough by up to 60% by rolling out in the satellite head with multi-rollers - Programmable control of up to 16 programs - Flexible shaping through precise cutting into rectangles, squares or diamonds with the guillotine - Automatic settling unit on nets, boards or conveyor belts - Dimensions: 7.0 m length x 1.3m width - El. Connection: 400 V, 2.0 kW Condition: Very good, ready to use Viewing and test run are possible.

Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Brand new unused flow control equipments ready to sale with a 50% of market value.

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

flying shears diameter range 8-16 mm cutting length 520-6000 mm speed - meters/min 25-75 diameter range 8-14 mm

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

diameter range 3-10 mm cutting length 1000 mm speed - meters/min 22-71

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

wire diameter range 1,5-7,0mm cutting length 3000 mm speed - meters/min 5-120

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

double wire processing diameter range 0,8-2 mm cutting length 1000 mm speed - meters/min 80

diameter range 3-10 mm cutting length 10-200 mm

diameter range 3-10 mm cutting length 10-130 mm

diameter range 0,2-1,3 mm speed - meters/min 15

diameter range 4-8 mm shaft length under head 40-110 mm output pieces/min 600

diameter range 2-6,35mm shaft length under head 20-175 mm output pieces/min 800 press power >150kN

diameter range 1,7-6,4 mm shaft length under head 4,5-75 mm output pieces/min 1000

vibratory feeder diameter range 12 mm shaft length under head 120 mm output - pieces/min 300

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Main spindleTechnology:Belt-driven spindleSpeed:4,500 rpmPower (max.):20 kWBar capacity:67 mmWorkpiece clamping:3-jaw chuck, Samchully MH-208BV1Tool holder:Technology:12-station turretTool holder:BMT45Tool drive:5,000 rpmTravel in X/Y/Z:175/-/350TailstockTechnology:Manual adjustmentTubus stroke:80 mmTubus diameter:65 mmMount:MT4Features/Accessories:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barAutomation:PreparedFinished Parts Removal:Parts Catcher with Collection Box

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Key data: 420 KW, 400 V

Sokratherm Gas CHP GG402H Gas electricity and heat generators from 2016, approx. 25,000 operating hours, with circuit, heat exchanger and silencers. 405 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 47.2L9 C 6/4, 600 KVA Manufacturer: Sokratherm Model No.: GG402H Type: Natural Gas CHP Serial Number: F160137 Engine: MAN E2842LE322 Engine power [KW]: 420 Electrical power [KW]: 405 Thermal power [KW]: 538 Gas power [KW]: 1,045 Year of Make: 2016 Operating hours: approx. 25,000 Dimensions LxWxH [m]: 3.80 x 1.50 x 2.30 Total unit weight [kg]: 5,990 AC Generator Leroy Somer LSA 47.2L9 C 6/4 Manufacturer: Leroy Somer Model: LSA 47.2L9 C 6/4 Type: AC Synchronous Generator Serial Number: 331643/2 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 2016 Operating hours: approx. 25,000 Weight [ ...