pipes and forged used for sale

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

1 SUPERBA steaming and shrinking machine type UNIVAP year 2001 machine runs 10 independent conveyor bands through one central steaming chamber never commissined (0 running hours)

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Complete screw and cylinder with filament and lockable nozzle. NEW!

Tuna Packing and Seaming Line: A complete, automated system for tuna packing and seaming, composed of the following high-performance equipment: De-palletizer for Empty Can Feed: Efficiently separates and feeds empty cans for the packing process. View details Magnetic Elevator: Transports cans using magnetic technology, ensuring smooth and secure handling throughout the production line. View details Tunipack GFDC Tuna Packing Machine: Fully automated tuna packing machine, designed to efficiently pack tuna in a 150 mm format, ensuring optimal packing speed and precision. View details Hermasa Transporter with Brine Doser: A reliable transporter system, integrated with an automatic brine doser to ensure precise application during the packing process. View details Oiling Machine for Fish Canning: Specialized machine for the uniform application of oil to fish, enhancing the preservat ...

Installation 2020 Plant shut down after 6 months and short test runs Original price 166.000,00 € Dosing and screening station Products - Product Name: Spices - Bulk density: approx. 0.4 - 0.7 kg/itr (AZO assumption) System characteristics Electrical characteristics Operating voltage: 230/400 V; 50 Hz. Control voltage: 24 VDC Degree of protection: IP 54 Compressed air characteristics Operating pressure: min. 5 bar /max. 6 bar Connections > 1/2" Compressed air quality class according to ISO 8573-1 Solid impurities: quality class 1 Humidity - at ambient temperature > 3°C: quality class 2/3 - at ambient temperature 10 mJ - KST value < 200 bar m/s - ignition temperature > 300 °C - Smoldering temperature > 275 °C - Contact Resistivity > 10° Ohmm

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Hersteller : Ferrocontrol, Spare part from machine: Plattenlager Systraplan, Type: FIPC 1.2.-CF-426B-010-C1, Control: 761,

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Hersteller : Hymmen, Spare part from machine: Elx S Lackauftragsmaschine,

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Hersteller : Datalogic Scanner Scanner inkl., Free text 1: Komplett verkabelt mit Netzteil und Verteilerdose, Free text 2: ca.25 Meter kabel dran,

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

Hersteller : Lenze, Type: 33.9212, Serial number: 00357356, Card number: 33.9212 E.4H, Screen: 003573560050150000001,

Hersteller : Baumüller, Type: BUS3-15/30-30-004, Serial number: S96320918H,

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

Turning- and Distibution Built in: 2000; working condition

Hersteller : Hitachi Umrichter, Type: L 100, Card number: 463PT19123, Free text 1: Input 50/60 Hz , Free text 2: 200-240 Volt, Free text 3: 16 Ampere,

Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw , Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H 9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

Hersteller : Senotec Füllstandsensor, Spare part from machine: Homag, Type: 4-008-40-0144, Serial number: 0-220-54-8330,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.452.69,

Hersteller : Homag Ausgangskarte, Type: HO0028895, Serial number: 2083015408,

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: Siemens PC 612 C B5282-B1300-C963,

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

wire diameter range: 1,0 - 4,0 mm cutting length: up to 2.000 mm wire feeding speed: 5 - 90 mtr./min; ready for operation

Hersteller : Homag Ausgangskarte 16 X 24 Volt, Spare part from machine: Kantenmaschine, Type: Homatic, Serial number: 2083015408,

Manufacturer : Homag Axle Card, Control: Flex Edge Sequence, Serial Number: 2-083-02-7012,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

Manufacturer: Motovario Neu, Year: Winkelgetriebe, Motor with gear: 20-1041169961, Ampere 1: 50/0,25 kw, Year :Winkelgetriebe

Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,