pipe used for sale

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm

tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: D997, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vibrating pipe, Construction: For spring suspension, Dimensions: Ø 220 x L 2900 mm, Manufacturer: Allgaier, Type: AFRU 220x2900

Stock number: D498, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Fat melter pipe, Construction: With clutch to C250 Wolfking grinder, Diameter: Ø 250 mm, Other: Prepared for direct steam injection

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw, jigsaw -Manufacturer: Fein, pipe reciprocating saw type AST 663 with accessories -Power: 750 W -Stroke rate: 300 /min -Accessories: Transport case, saw blades (see photos) -Box dimensions: 680/400/H350 mm -Total weight: 27 kg

Stock number: D495, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vibration pipe, Dimensions: Ø 350 x L 5500 mm

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

Filter hose for chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose, flexible pipe, reinforced pipe -Flexible pipe: Exhaust hose with flange -Length: 2100 mm -Material: Galvanized steel -Quantity: 1x flexible pipe available -Dimensions: Ø 170 x 2100 mm -Weight: 10 kg

Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

Pipe grab, round grab -self-locking -Replacement arms -up to approx. max.: Ø 150 cm -Clamping claws -Total weight: 350 kg

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Pipe suspension, shaft ring suspension -Load capacity: 10 tons -Chain length: 2000 mm -Weight: 80 kg

Pipe suspension, shaft ring suspension -Load capacity: 3 tons -Chain length: 1100 mm -Weight: 96 kg

Pipe heating device, pipe burner, pipeline construction burner -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Pipe welding accessories, forming gas welding equipment, forming gas welding aid -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg

Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg

4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions -Diameter: 300 mm -Number: 2 pillows available Price: per piece -Weight: 6 kg/piece

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...

Profiles bending roll Tauring Alfa 70H2 year 2003 Used machine in perfect working condition Technical data: -Hydraulic section bending machine with digital readout -dual pre-pinch pyramid roll configuration 3 rolls powered driven - Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube size 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED ::::::

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

diameter: 20 - 100 mm workpiece length: 3000 - 12000 mm number of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm² feed speeds: 60 m/min Angle: 10 - 22 ° main drive motor: 132 kW roll speed: 180 U/min total power requirement: - kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 7500 x 3000 x 2850 m Machine was retrofitted (Eletric) and not much used 2 roller straightening machine, fully hydraulic and equipped with: - Siemens PLC/SPS control system - Hydraulic roller - Loading table with chain transport - Infeed channel with pressure roller - Pressure rollers - Gearboxes and motors - Siemens Sinamics drives - New electrical system - Hydraulic units - Spare set of rollers - Machine with complete hydraulic adjustment -- Upstroke of upper Roll: 210mm -- Hydraulic cap Stroke: 13mm -- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm  ...

Stainless steel pipe bend, welded bend -Size: 40 x 1.5 mm 90° Price: complete -Quantity: 39 pieces -Weight: 7 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -Size: DN 40 -Nuts: 15 -Screw connection: 30 Price: complete -Weight: 14 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

New Part Number: 0209 2231 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1231 3041 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1180 mm -Dimensions: 1180 x 500 mm -Weight: 140 kg

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg

New Part Number: 0209 2230 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1231 3035 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Plastic pipe, polyamide pipe -Plastic pipe: 50 pieces -Length: 1695 mm -Outer diameter: 96 mm -Inner diameter: 76 mm -Weight: 4 kg/piece -Submission/Price: complete -Transport dimensions: 1700/1056/H600 mm -Total weight: 200 kg

Insulated multilayer pipe 20x2.5 Auction-ID: A7-49228-24

RECON Part Number: 3773314500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 6065 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Insulated multilayer pipe 16x2.25 Auction-ID: A7-49228-26

RECON Part Number: 3773314600 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Insulated multilayer pipe 16x2.25 Auction-ID: A7-49228-25

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg

RECON Part Number: 3773205500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!