pipe saw used for sale

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

SPECIFICATIONS: Saw blade spacing: max. 2800 mm Tilt: 0° - 90° Saw blade: Ø 350 mm Installed power: 2.2 kW x 2

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

SPECIFICATIONS: Workbench dimensions: 4000 x 500 mm Saw blade: Ø 450 mm Installed power: 5.5 hp

SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Key data: 4300 mm

Angle system for panel splitting with a cutting length of 4300 mm and 2200 mm the system also has 2 lifting stations at the exit and a scrap wood divider cutter

A horizontal double-column bandsaw Behringer is available. Cutting range round material: 340mm, cutting range square material: 340mm/340mm, cutting speed: 120m/min, saw band dimensions X/Y/Z: 4860mm/32mm/1.1mm, machine dimensions X/Y/Z: approx. 3250mm/2600mm/1650mm, weight: approx. 2500kg. An on-site inspection is possible.

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Behringer HBM 540 A Automatic Band Saw Year of manufacture 2005 Flat working area 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Feed roller conveyor driven 8750mm Width 1100mm Discharge roller conveyor not driven 5020mm width 910 Conveyor The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Sliding table saw ALTENDORF F 35 Type 3 - 1000-Exhibition-Machine-5.5 kW (7.5 HP), 3 speeds, Motorized height and swivel adjustment, Large protective cover, Double trolley 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, Cutting width 1,000 mm, Angle mitre stop 3,450 mm, without length compensation, Table top extension/table top extension:, With high-quality CDF surface---------- Technical data ----------Swivel range: 0 - 46 Â, Carriage length: 3,200 mm, Cutting length: 3100 mm, Cutting width:

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x  ...

Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg

cutting diameter: 650 mm saw band length: . mm cutting width: 1000 mm Cutting height: 650 mm weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution  ...

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twin-shaft multi-blade saw Raimann Type KD 31 Year of Make: 1981 Chain width 340 mm Cutting height 200 mm Electric height adjustment 2 x 45 kW motor Shaft diameter 65 mm Feed modernized to infinitely variable speed via potentiometer from approx. 0 to 40 m/min. incl. 3 saw bushes with saw blades and partly new saw blades Transport chain with spikes Good condition, ready for immediate use, demonstration possible.

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,

Height=0.35 m, Overall length= 0.9 m, Overall width= 1.1 m, Net weight= 63 kg,

Height=0.33 m, Overall length= 0.24 m, Overall width= 0.7 m, Net weight= 20 kg,

Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,

Height=1.97 m, Overall length= 1.01 m, Overall width= 1.018 m, Net weight= 305 kg,

Height=1.85 m, Overall length= 0.96 m, Overall width= 0.94 m, Net weight= 210 kg,

Height=0.955 m, Overall length= 0.619 m, Overall width= 0.519 m, Net weight= 76 kg,

Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 136 kg,

Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible.

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...