126,721 used machines on RESALE, but how to find them? Machine Search
Metalworking machine Circular saw cutting line MACO VK370, model VK AR ALU. Manufacturing year 2013. This is a fully automatic saw with a +/-45 degree rotating blade. It has been in production work about 3-4 years. Find more here - / Contact us at -
Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw
Sawing machine only Automatic table Saw grinding function Auction-ID: A3-43519-2189
The sliding table saw is in good condition and is functional. Auction-ID: A3-43519-34053
Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -
Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw
2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW
SPECIFICATIONS: Saw blades: max. Ø 320 mm Installed power: 22 hp Conveyor belt width: 250 mm 2 feed speeds Cutting height: max. 100 mm Motorized height adjustment Extraction opening: Ø 150 mm
With roller conveyor dimensions. 3500x550x860 mm Auction-ID: A1-43429-85
1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -
Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
Key data: 45 °, 2800 mm
Sliding Table Saw Main motor 5.5 KW Scoring saw
- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
WIELOPILA WURSTER DIETZ FR10 WYSOKOSC CIECIA 160MM SZER 850MM SILNIK 90KW PODAJNIK ODBIORNIK ZE ZRZUTEM LASERY
besaummer automat Wurster Dietz fr97 komplete anlage built in 1997
Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm
Key data: 350 mm, 100 mm
Automatic with power gearbox also for high-alloy materials.
Metal band saw OPTIMUM OPTIsaw S275N - Exhibition machine - feed infinitely adjustable, swivelling ---------- Technical data ---------- Swivel range: 0 - 60 Â, cutting height: 150 mm, cutting depth: 230 mm, saw blade speed: 45 / 90 m/min., saw blade length: 2,480 mm, motor 400 V: 1.1 kW, dimensions (LxWxH): 1,400 x 530 x 1,360 mm, weight: 185 kg - new exhibition machine -
Stored in working condition with water cooling. The buyer must provide his own transport. Elevator available to charge it.
Machine number: 01882 Cutting length: 300 mm incl. roller conveyor Roller conveyor width: 380 mm Roller conveyor length: 4000 mm
Woodchip and saw dust extractor, available immediately. More info on request. Location: 2311 Hoče Slovenia.
Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min
Scope of delivery: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m
PART NUMBER: 7540 Specifications: - max disc diameter 350mm - spindle diameter 30mm - up/down adjustable dial - electric brake - shield guard - max cutting height for the blade 350mm - 100mm - min saw spacing 250mm - max saw blade spacing (edge saw blade spacing) 2500mm - max cutting length 2170mm - electric saw spacing - with a scorer - max scorer disc 130mm - spindle diameter 20mm - power of the scoring motors 2×0.75kW - main motor power 2x4kW - bottom bracket motor power 0.37kW - 2 types of rotation speed 3000,4500 rpm - extraction spigot diameter 2x120mm, 2x80mm - total dimensions length/width/height 4500x3000x1600mm - weight about 1100kg Advantages: – Polish production – electric saw spacing – DTR documentation – very good condition – used double saw Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices ...
PART NUMBER: 7522 Specifications: - max cutting length 3100mm - max cutting thickness 100mm - max cutting width 640mm - distance gauge - main saw motor power 11kW - feed motor power about 2×2.2kW - feed speed (continuously variable transmission) 10-50m/min - pressure beam - blade diameter 450mm - work table height 860mm - working table width 650mm - extraction spigot diameter 3x180mm - total dimensions length/width/height 5600x2200x1800mm - weight about 3000kg ADVANTAGES – Belgian production M.D'Hulster – for edging boards – DTR documentation – used saw, very good condition Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)
Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg
cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 600 mm, 150 mm
Cross-cut saw with saw blade D 600 Roller conveyors at the entrance material Roller conveyors at the outlet material with folding stop W 250 mm Roller conveyors can be expanded per metre
SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication
DOUBLE HEAD CUTTING MACHINE Inv. No. 13.109Z1 Make MECAL Model SW-453 Mach. No. 9001099 Year 2002 Useful cutting length 4.000 mm Max. lame diameter 500 mm Pneumatic inclination of the heads 90° / 45° - 22.5° Including: External inclination Feeler
maximum number of results exceeded
please refine your search
10 € 
