pipe mill used for sale

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Tool holder, milling holder, milling tool -Milling holder: SK40 holder -Inner diameter: Ø 25 mm -Dimensions: Ø 63 x 117 mm -Weight: 0.8 kg

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Tool holder, milling holder, milling tool -Manufacturer: Dornag Swiss, milling chuck SK40 -Inner diameter: Ø 25 mm -Dimensions: Ø 65 x 175 mm -Weight: 2.1 kg

Tool holder, milling holder, milling tool, adapter, Weldon -Milling holder: test mandrel -Type: MK4 / Ø 30 mm W8802 C15 -Dimensions: Ø 31 x 300 mm -Weight: 1.6 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK4 holder -Type: Ø27 x 60 mm Z 03 1-02 -Dimensions: 245/43/43 mm -Weight: 1.3 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Gear milling machine Micron 106 16 A 380 V

Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK5 holder -Type: Ø32 x 22 mm -Dimensions: 200/60/60 mm -Weight: 2.1 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 150 x 15 mm, cross-toothed -Hole: Ø 32 mm -Weight: 1.2 kg/piece

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 Ø 50 mm -Dimensions: Ø 100 x 200 mm -Weight: 4.0 kg

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction -Milling adapters: intermediate sleeves, 6 pieces -Type: SK40 MK4 5 pieces / SK40 MK3 1 piece -Price/Delivery: complete -Total transport dimensions: 190/135/H225 mm -Weight: 7.8 kg/total

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

tool holder, tool holder, milling holder, milling tool -Manufacturer: Komet, Mount: SK50 -Type: AB 50x80x60 Ex CELL-0 -Dimensions: 95/90/H185 mm -Weight: 3.7 kg

tool holder, milling holder, milling tool, adapter, Weldon -Milling holder: test mandrel -Type: SK40 / Ø 60 mm -Dimensions: Ø 60 x 1000 mm -Weight: 20.2 kg

clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Milling holder: adapter -Hole: Ø 59 x 73 mm / Ø 40 x 85 mm -Dimensions: Ø 70 x 158 mm -Weight: 2.4 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Manufacturer: Clarkson, 2 pieces collet chuck SK50 -Type: Autolock / Qualcut -Clamping sleeves: Ø 6/19/25 mm -Delivery/Price: complete -Transport dimensions. 300/190/H100mm -Total weight: 11.4 kg

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Type: various designs, see photos -1x Tool holder: Ø 32 mm -1x Tool holder: Ø 40 mm with milling cutter Ø 44.5 mm -Price/Sale: complete -Dimensions: 315/200/H100 mm -Total weight: 10.8 kg

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

shell end mill, shell milling cutter, milling cutter, milling holder, milling tool -Shell end mill: SK50 chuck -Milling head: Ø 63 mm -Dimensions: Ø 97 x 270 mm -Weight: 5.1 kg

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 6 pieces -Type: various versions see photos -Hole: Ø 40 mm -Price/Delivery: complete -Transport dimensions: 300/200/H240 mm -Total weight: 24.8 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: SK50 holder -Shaft: Ø 80 mm / bore Ø 50 mm -Dimensions: Ø 98 x 235 mm -Weight: 5.3 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 -Hole: Ø 60 mm -Dimensions: Ø 130 x 235 mm -Weight: 7.6 kg

Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK50 cutter head chuck, 2 pieces -Type: various designs, see photos -Hole: Ø 22 mm -Price/Sale: complete -Dimensions each: Ø 97 x 175 mm -Weight: 11.6 kg

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR