pipe mill used for sale

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Universal milling head, milling chuck, milling extension, angle milling head -Spare part from an R

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, upper support -Swallowtail: 86 by 73 mm 14 mm high -Drawing with the photos -Dimensions main part: 132/760/H112 mm -Dimensions intermediate part: 138/324/H55 mm -Weight: 40 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos -Dimensions: 290/90/H225 mm -Weight: 12 kg

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 148 by 178 mm by 30 mm high -Bore diameter: 45 mm -Drawing with the photos -Dimensions: 300/80/H255 mm -Weight: 14 kg

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

Gear milling machine Micron 106 16 A 380 V

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 15 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 9 kg

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

Sachman RP3 milling machine :::SPECIFICATIONS::: CNC Model: Heidenhain CNC version: TNC 426 Head type: Manual bi-rotary head Tool connection: iso 50 Spindle power: 15Kw Number of spindle revolutions: 3000 X Shaft Stroke: 2500mm Y-axis stroke: 800mm Z Axis Stroke: 950mm Table dimensions: 2700 x730mm Guides: flat Type of cutter: fixed bench Mechanical range change: yes :::D IMENSIONS AND WEIGHT::: Length: 4500mm Width: 3736mm Height: 2775mm Weight: 12500Kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 -Socket: Ø 50 mm -Weight: 6.8 kg