pipe mill used for sale

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm

Bead Mill Manufacturer: Fryma No.: M11499 Type: MS-12 Year of construction: 1998 Power: 3.12 kW Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Internal volume: 0.5 l Throughput (water): 0.4 m³/h speed-controlled excenter screw pump with pressure gauge, with temperature gauge with control cabinet LBH: 950 x 550 x 750 mm

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

Bead Mill Manufacturer: Fryma Type: MS-12 Year of construction: 1992 No.: M15426 Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Power: 3.0 kW with control cabinet with speed-controlled hose pump speed-controlled rotor with temperature gauge (glass broken) with pressure gauge with double-acting mechanical seal LBH: 800 x 600 x 760 mm

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

Bead Mill Manufacturer: Fryma Type: MSS-50 Year of construction: 1993 No.: M15825 Internal pressure: 2.5 bar Pressure double jacket: 2.0 bar with control cabinet Power: 45 kW Operating hours: 17 589 h very good condition as good as new grinding chamber LBH: 1600 x 1200 x 2100 mm

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Tool holder, milling tool holder -Recording: SK40 -Tool holder: Ø 28 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 60/60/H210 mm -Weight: 1.5 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK2 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 190/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 1 recording available -Dimensions: 230/95/H95 mm -Weight: 3.2 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece

HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 27 x 60 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 250/95/H95 mm -Weight: 3 kg/piece

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg