pipe mill used for sale

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Tool holder, milling holder, milling tool, adapter -Adaptation: SK50 13 pieces adapter -Tool holder: MK5/MK4/MK3/MK2 -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 740/500/100 mm -Weight: 54.9 kg

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Used sand miill Vollrath type VMSM 2/15 A. Two chambers 15 L volume each. Motor 24 kW, weight 1050 kg.

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

Tool holder, milling holder, milling tool, -Milling mounts: 5 pieces mount MK3 -Sizes: see pictures -Price: complete -Dimension box: 665/125/H30 mm -Weight: 6.1 kg

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Tech. Data and more info on request

Tool holder, milling holder, milling tool, cutter head -Milling fixtures: 12 pieces of different designs, see photo parts list -Sizes: see pictures -Price: complete -Dimension box: 200/330/H180 mm -Weight: 14.4 kg

Used cryogenic mill model PCJ-500. Machine for grinding the product cooled with liquid nitrogen, made of 304 stainless steel, 16 mm thick, externally dimensioned: - length: 6844 mm - width: 2132 mm - height: 3588 mm. Focused on grinding the product based on liquid nitrogen, which allows achieving a temperature of -196 ° C. Liquid nitrogen does not come into contact with the product, it is the source of this low temperature. The cryogenic mill requires a nominal power consumption of 40.45 kW, at 380V, 50Hz.

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm -Weight: 7.5 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Corundum stone mill Manufacturer: Fryma Type: MK-270 R Built: 1981 N°: F815198/9 Pressure working space: 1 bar Pressure double jacket: 10 bar with control cabinet with temp gauge with outlet chute various spare parts LWH: 1100 x 850 x 1700 mm

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370

Colloid mill Manufacturer: Probst & Class Type: N100E N°: 90028 Power: 5.5 kW Engine manufacturer: Loher with operating instructions various spare parts (piping, taps, etc.) LWH: 1150 x 400 x 800 mm

Corundum stone mill Manufacturer: Fryma Type: MMR-O N°: 166 with funnel & outlet Power: 12 hp with various grinding discs LWH: 500 x 500 x 1250 mm

Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.

Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Three-roller Manufacturer: Joseph Vögele AG Type: PW 3103 Item #: 713345 Year of construction: 1965 LWH: 550 x 850 x 1200

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Milling machine +6 mesh Mesh size 0.2/0.6/1.0/2.0/4.0/5.0mm Germany Wall Engine Updrive M1S-632-2 B3 Single-phase AC motor with start-up and operating capacitor, 0.25 kW, 2800 min-1, 230 V 1~, 50 Hz, IP 55, Iso F, S1, 40° C, Design B3 (foot 80 x 100 mm) Hpg28ilv Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition