pipe making used for sale

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG

Offer 26102 Technical data: - Cutting range 140 - 330 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 400 kg - 2 x roller conveyor 1500 mm

Offer 26101 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe belt conveyor in mint condition VECOPLAN type VRF 500 P. Never used before! Including drive station and deflection station, without belt! Drive station with 15 kW Flow rate approx. 200 m³/h Length approx. 65 running metres, diameter 500 mm

Waste stainless steel pipes ( 42CrNi18-10 ) Dimension 20 x 1 x3000 mm 39 pieces à'3 meters s

Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch

KG tube red and green, 4 lattice box pallets, filled, mostly only fittings, various sizes, partly faded

An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible.

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

Kieserling WRUW1 bar straightener for 5 -30mm bar diameters. Speed 40m/min. New set of spare straightening rolls

Key data: 60 mm, 25

Complete extrusion line for the production of 3-layer PE-Xb, PE-Xc and PE-RT pipes Year of Make: 2001 Available diameters: 14 x 2 / 16 x 1.5 / 16 x 2 / 17 x 2 / 18 x 2 / 20 x 2 / 25 x 2.3 Line speed: approx. 35 m/min Description: Single Screw Extruder Battenfeld BEX 1-60-30B Capacity: 200 kg/h (for PE-X) AC drive Bimetal screw and barrel: 60 mm, L/D = 25 (renewed in 2025) BMCtouch (PC has been replaced with a new one) Integration of BEX co-extruders Integration of scales and gravimetric dosing unit (DOS-3) Melt pressure and melt temperature sensor Material hopper Nozzle adapter 2 x Co-extruder Battenfeld BEX E 30.1 KSY1 x 25D Capacity: 18 – 20 kg/h (for EVOH and adhesion promoters) Nozzle Head PE-X-50 Co-extrusion ring for EVOH and adhesion promoters Vacuum Calibration V2-63 VA – 9 m Electromotive length adjustment Measurement and control of wat ...

KG pipe parts various.. Varieties, content 6 track lattice boxes, further lattice box without contents, tires belong to vehicle

Sewer accessories Content pallet and associated pipes in hall

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-48441-98

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

Material / Max Capacity / Min Radius Flat / 1 1/4\" / 10\" C Channel 1x2\" / 60\" Round Tube 1 1/2\" / 20\" Round Tube 2\"/60\" Diameter of rollers 1 1/2\" Maximum tube diameter 38 mm. Condition: never used / new (5) Auction-ID: A7-48486-173

Pipe grinding machine with 11 grinding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170 mm Tube clamping area 170mm Documentation (English) Belt width 200 mm Belt length 1600 mm Pipe diameter 38 - 170 mm Connection voltage 400 V Total power requirement 3.0 kW Machine weight approx. 0.25 t Space requirement approx. 1.4 x 0.8 x 1.35 m Condition: never used / new (5) Auction-ID: A7-48486-75

Mobile pipe bender up to max 2\" Tool for 42mm pipe see pictures Auction-ID: A7-48486-58

Pipe bender - Power 3/8\" to 2\" pipe - Tools for 3/8\" - Incl. base frame see pictures Auction-ID: A7-48486-3

Hydraulic Pipe Bender Compressive force 16t 8 pieces of bending elements from 1/2\" to 3\" Condition: never used / new (5) Auction-ID: A7-48486-71

Pipe notching Wall thickness max. 3.0mm Suitable for the following pipes: 1/4\", 1/2\", 3/4\", 1\", 1 1/4\", 1 1/2\", 2\" Tube Diameter 1/4\" max. 2\" inches Wall thickness max. 3.0 mm Motor 400Volt / 1.5KW Weight 90 kg Dimensions L x W x H 07 x 0.4 x 0.3 m Auction-ID: A7-48486-31

Pipe Thread Cutter - For threads 1/4\" to 4\" - Footswitch - 2. Threaded jaw holder - Incl. cutting jaws see pictures Auction-ID: A7-48486-63

Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Tube clamping range 90mm Documentation (English) Belt width 100 mm Belt length 2000 mm Tube diameter 16.5 - 76 mm Angle adjustable from - to 0 - 65 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.17 t Space requirement approx. 1.3 x 0.7 x 1.1 m Condition: never used / new (5) Auction-ID: A7-48486-54

Auction-ID: A1-48530-2973

Batch of pre-insulated steel pipes for use in heat networks and industrial pipe installations. Version with steel medium pipe, PUR insulation and black HDPE casing pipe. Various diameters and lengths available. Equipped with protective caps at the ends. Suitable for hot water transport and industrial applications. Sell as one party. Condition, numbers and dimensions according to photos. Auction-ID: A1-47435-132

Stock 3 rolls of Geberit multilayer pipe 2 pcs of 26 Ø , 1 pc of 16 Ø Auction-ID: A7-48625-29

Stock 2 Geberit multilayer pipes Ø26x3 Auction-ID: A7-48625-27

6 rolls of multilayer pipe Ø26x3 Auction-ID: A7-48625-21

Stock 2 Geberit multilayer pipes Ø26x3 Auction-ID: A7-48625-25

Stock 2 Geberit multilayer pipes Ø26x3 Auction-ID: A7-48625-26

Stock 2 Geberit multilayer pipes Ø26x3 Auction-ID: A7-48625-28

Stock 4 rolls of multilayer pipe Geberit 26 Auction-ID: A7-48625-30

Stock 6 rolls floor heating pipe Auction-ID: A7-48625-31

1x Rotherberger pipe bender 22mm, 1x pipe bender 18mm, 1x Ybico crimping tool Auction-ID: A1-48235-99

Includes various dies, up to 2 inches. In and with wooden box Auction-ID: A1-48414-136

Serial number 18021 Machine type CNC pipe bending machine Brand PICOT RAGACHE (Lyon, France) Model U 18 AE3 Serial number 18021 Country of origin France Siemens numerical control Sinumerik Current location Pitești, Romania Condition Unused since 2020 - sold in its current state (repair of the power supply panel to be provided) more technical data see, attached pdf 4 - CNC rolling.pdf Auction-ID: A7-48723-7

Handle material: Chromed steel Bending head material: Aluminum For copper and aluminum tubes: This pipe bender is suitable for both copper and aluminum tubes, making it versatile. Precise bending up to 180 degrees: Thanks to the degree distribution, you can perform any bend to the degree. For pipes with a diameter of 8-10-12 mm: Suitable for different pipe diameters, so you only need one tool for multiple jobs. Rubber handle: For extra comfort while working, even after a long working day. Length: 340 mm Width: about 48 mm Auction-ID: A1-40893-482

Auction-ID: A1-48478-18

Auction-ID: A1-48478-15

Pipe Bending and Notching Machine Set – JD2 Model 32 + JD2 Notch Master Description Complete pipe processing set consisting of a JD2 Model 32 pipe bending machine and a JD2 Notch Master pipe notching machine. The system enables the complete fabrication of pipe structures – from bending to precise joint preparation. Technical Specifications Manufacturer: JD Squared (USA) Tube Bending Machine – Model 32 • Mechanical drive (ratchet system) • Maximum bending angle: 180° • Tube diameter: approx. Ø12 – Ø63 mm • Robust industrial design Tools included: • Dies for 22 mm and 25 mm tubes Other die sizes are available for this model Pipe notcher – Notch Master • Hole saw cutting system • Adjustable angle: 0–50° • Tube diameter: approx. Ø19 – Ø76 mm • Precision bearing construction Features • Complete system: Bending + connection preparatio ...

Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...