pipe head for used for sale

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/2-3/4 inch -Weight: 4.5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/4-1 1/2 inch -Weight: 14.5 kg

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 inch -Transport crate -Weight: 8.5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1- 2 inch -Weight: 6.5 kg

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -with translation -Shaft mounting: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -Replacement jaws: 4 -inch thread: 1/2-2 inch -Transport crate -Weight: 16 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1/4 - 1 1/2 inch -Weight: 8 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1- 2 inch -Weight: 12 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-3/4 inch -Weight: 6 kg

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 11 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 17 kg

6 cylinder covers MAK M20 The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - On (20°) and exhaust valve seat rings (30°). - Inlet and exhaust valves. - Swivel devices. Nozzle sleeves were used with new sealing rings. Cylinder cover tested with 10bar water pressure. Round seals valve guide renewed. The sealing surface has been tested, is fine. Packed in wooden boxes. Price per piece

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Recording: SK50 -Adjustment range: 20 mm -Tool shaft: Ø 30 mm -Weight: 10 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 130 mm -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 33 mm -Dimensions: 100/80/H130 mm -Weight: 2 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Quantity: max. 1x drill bit -Recording: M8 -Dimensions: 80/80/H150 mm -Weight: 0.8 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

MaK M20 cylinder heads 4 pcs available in good condition std sized seat bores, free of cracks and weldings from our istanbul stock

MAN 27/38 Cylinder heads Std sized seat bores Free of cracks and weldings 20 pcs available in good condition From our istanbul stock Please contact us at infofin-marine

MAN 32/40 Cylinder heads Augsburg type 11 pcs available froms stock in good condition std sized seat bores, free of cracks and weldings from our istanbul stock

z.B. for Borelli Alexa / Futura screw capper

0,75 Kw, adjustable

Deutz 628 cylinder heads 9 Pcs available Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : infofin-marine

Plastic screwcap

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

MWM TBG 616 ; MWM TCG 2016 /2017, MWM TCG 2018 / 2019 / 3016 PARTICIPANTS: 8000 0616 CFS: 0518 0616 PARTICIPANTS: 8000 2016 CF: 0518 2016 PARTICIPANTS: 8000 2017 CF. 0518 2017 PARTICIPANTS: 8000 2018 CF: 0518 2018 PARTICIPANTS: 8000 2019 CF: 0518 2019 Engine variants: V8 / V12 / V16 MWM TBG 604 ; MWM TBG 620 ; MWM TCG 2020 PARTICIPANTS: 8000 6005 CFS: 0518 6005 TEM PARTICIPANTS: 8000 0277 CFS: 0518 0277 O2 PARTICIPANTS: 8000 6007 CF: 0518 6007 PARTICIPANTS: 8000 6002 CFS: 0518 6002 PARTICIPANTS: 8000 6008 CF: 0518 6008 PARTICIPANTS: 8000 6009 CF: 0518 6009 Engine variants: V12 / V16 / V20 If you are interested, please inquire. We are sure that we are dealing with unbeatable prices!

mak 601 cylinder head 4 Pcs available Std sized exh seat bores without any cracks or welding from our stock in Istanbul

Pielstick PA280 cylinder heads Free of cracks and welding Std sized exhaust seat bores 8 pcs available From our istanbul stock

RECON Part: ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Cylinder head overhauled, ready for installation 2 pieces in stock

2 Stitching Heads Muller Martini HK 45 Atr.Nr. PS6173

Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available

Cylinder head for Wärtsilä Vasa R32 engine, ready to install

sormac / 2018 Vegetable head cutter for example for carrots with infeed unit and outfeed conveyor used, sold as it is, where it is, price ex location

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loma IQ Twin head metal detector Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph

Agilent G 1888 A Network Headspace Sampler 70 Vial tray, pressure control Controllable via Keypad or Agilent Chemstation

spindle taper ISO: 40 throat: ca. mm Shipping weight: 45 kg Packing: 400300300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/min drive motor: 0,55 kW total power requirement: 0,55 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doppelkopfheftmaschine - 2 Stitching heads Stapler Nagel Multinak S Mit der MULTINAK S Doppelkopfheftmaschine mit elektrischem Antrieb heften Sie Broschüren und Blocks bis 27 mm Stärke, für Block- und Sattelheftung. Electric stapling machine with two stapling heads with adjustable distance for block and saddle stapling for brochures in medium to high work volumes, for flat and saddle stapling stiting. Baujahr / Year 1996 Heftköpfe AS für Blocks bis 15 mm / Stapling head AS blocks and brochures up to 15 mm  Heftkopfabstand verstellbar im Bereich von / Distance adjustable between 80-155mm Heftklammernlänge / Staples arm length 6-30mm Heftklammernsorten 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples Technische Daten / Technical Details: Anschluss / power supply 400 V / 50 Hz Maße / Dimensions Width 600 x Deep 750 x Tall 1100mm Gewicht / Weight net 100kgs ...

1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150 Serial-No. 7404 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test