135,364 used machines on RESALE, but how to find them? Machine Search
Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS
1 uL-50mL, rechargeable with stand Auction-ID: A1-48959-444
Volume 10-100 uL, not used in carton box Auction-ID: A1-48959-456
With charger and various accessories Auction-ID: A1-49790-1272
Volume 100-1000 uL, not used in carton box Auction-ID: A1-48959-449
Rechargeable, not used in carton box Auction-ID: A1-48959-454
Volume 100-1000 uL, not used in carton box Auction-ID: A1-48959-448
With 5 power adapters Auction-ID: A1-48959-437
Volume 20-200 uL, not used in carton box Auction-ID: A1-48959-458
Volume 2-20 uL, not used in carton box Auction-ID: A1-48959-445
4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!
Volume 0.5-10 uL, not used in carton box Auction-ID: A1-48959-447
Rechargeable, not used in carton box Auction-ID: A1-48959-455
Volume 10-100 uL, not used in carton box Auction-ID: A1-48959-457
Rechargeable, not used in carton box Auction-ID: A1-48959-453
Volume 2-20 uL, not used in carton box Auction-ID: A1-48959-446
tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...
Profiles bending roll Tauring Alfa 70H2 year 2003 Used machine in perfect working condition Technical data: -Hydraulic section bending machine with digital readout -dual pre-pinch pyramid roll configuration 3 rolls powered driven - Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube size 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED ::::::
Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.
Consisting of 13 RFID pipette, 1x Eppendorf Multipette E3 and 5x Integra Pipetboy Auction-ID: A1-49790-1411
diameter: 20 - 100 mm workpiece length: 3000 - 12000 mm number of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm² feed speeds: 60 m/min Angle: 10 - 22 ° main drive motor: 132 kW roll speed: 180 U/min total power requirement: - kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 7500 x 3000 x 2850 m Machine was retrofitted (Eletric) and not much used 2 roller straightening machine, fully hydraulic and equipped with: - Siemens PLC/SPS control system - Hydraulic roller - Loading table with chain transport - Infeed channel with pressure roller - Pressure rollers - Gearboxes and motors - Siemens Sinamics drives - New electrical system - Hydraulic units - Spare set of rollers - Machine with complete hydraulic adjustment -- Upstroke of upper Roll: 210mm -- Hydraulic cap Stroke: 13mm -- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm ...
With 8 power adapters Auction-ID: A1-49790-1306
used
Recon Part Number: 1231 3041 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.
new
New Part Number: 0209 2231 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 1231 3035 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.
new
New Part Number: 0209 2230 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 1227 6065 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.
used
RECON Part Number: 3773314500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Maximum Diameter: 110 mm // Minimum Diameter: 32 mm
used
RECON Part Number: 3773314600 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
RECON Part Number: 3773205500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
maximum number of results exceeded
please refine your search
10 € 
