136,318 used machines on RESALE, but how to find them? Machine Search
Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions -Diameter: 300 mm -Number: 2 pillows available Price: per piece -Weight: 6 kg/piece
Stainless steel pipe bend, welded bend -Size: 40 x 1.5 mm 90° Price: complete -Quantity: 39 pieces -Weight: 7 kg
Milk pipe fittings, milk pipe nuts, stainless steel fittings -Size: DN 40 -Nuts: 15 -Screw connection: 30 Price: complete -Weight: 14 kg
Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg
Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1180 mm -Dimensions: 1180 x 500 mm -Weight: 140 kg
Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg
Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90
Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition
Plastic pipe, polyamide pipe -Plastic pipe: 50 pieces -Length: 1695 mm -Outer diameter: 96 mm -Inner diameter: 76 mm -Weight: 4 kg/piece -Submission/Price: complete -Transport dimensions: 1700/1056/H600 mm -Total weight: 200 kg
Pipe freezing device ROLLER, S Roller ́s Polar Application range: 20- 60 mm with plastic case and documents ! used, tested ! Dimensions ( case ): 520 x 375 x 125 mm
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg
Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg
Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
Stapellift / Pile Lift Polar LW-1000-4 Baujahr / Year 1998 - Serial-No. 6872198 Plattform Fläche / Size max 1260 x 840mm Hubhöhe / Lifting height max 1040mm Tragfähigkeit / Lifting Capacity 1.000kg Eigengewicht / Weight 490kg
Axial fan, axial tubular fan VENTILATORENFABRIK BUCURESTI, IDV BUCURESTI VAS400-4 0,0,0 695 - 1,125 m3/s speed: 1400 rpm motor : 0.25 kW 220 / 380 V inner diameter: Ø 400 mm New !' Dimensions: 460 x 310 x 460 mm
Centrifugal fan, centrifugal duct fan RUCK RK125L max. 330 m3/h impeller: Ø 180 mm Pipe diameter: Ø 120 mm motor: 0.0.00 mm 07 kW 230 V AC 50 Hz approx. 1.8 m connection cable New !' Dimensions: 270 x 220 x 250 mm
Flexible Piping PAGUS NW 50 flange: Ø 75 mm New ! Stainless steel ! Dimensions: 500 x 80 x 80 mm
S-Mouth Pipe Wrench ALARM 1 1/2 11021 DIN 5234 68 mm Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm
Pipe transport trolley, gas cylinder trolley, gas cylinder cart, steel cylinder cart, transport trolley -Manufacturer: Sumner Manufacturing, pipe transport trolley -Tires: Tubular tires -External dimensions: 1730/665/H680mm -Weight: 31 kg
ABC Open-end Pipe Wrench ALARM 1 1/2 11034 DIN 5234 67 mm Corner O-Point Jaw Shape for Round and Square Workpieces and Sheets Chrome Vanadium Steel New ! Dimensions: 445 x 90 x 25 mm
Corner Pipe Wrench Set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm
Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device -Chain wrench: Pipe chain wrench type No. 35 -Length: 1260 mm -Dimensions: 1260/150/H110 mm -Weight: 5.7 kg
Chain pipe wrench, pipe chain wrench, chain pipe wrench, chain wrench, chain pliers, pipe clamping system, pipe welding machine, pipe assembly device -Chain wrench: Pipe chain wrench type No. 3 -Length: 800 mm -Dimensions: 800/100/H60 mm -Weight: 5.7 kg
tube diameter: 1/4 max. 2 Zoll wall strength: max. 3,0 mm engine: 400Volt / 1,5KW weight: 90 kg dimensions: 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm
used
Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm
tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: D997, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vibrating pipe, Construction: For spring suspension, Dimensions: Ø 220 x L 2900 mm, Manufacturer: Allgaier, Type: AFRU 220x2900
Stock number: D498, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Fat melter pipe, Construction: With clutch to C250 Wolfking grinder, Diameter: Ø 250 mm, Other: Prepared for direct steam injection
Stock number: D495, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vibration pipe, Dimensions: Ø 350 x L 5500 mm
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...
An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.
Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS
4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!
tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...
Profiles bending roll Tauring Alfa 70H2 year 2003 Used machine in perfect working condition Technical data: -Hydraulic section bending machine with digital readout -dual pre-pinch pyramid roll configuration 3 rolls powered driven - Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube size 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED ::::::
Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
20 € 
