pipe head for used for sale

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inside: Ø 60.3 mm -From: 59.5 to: 61.0 mm -Pressure: 16 bar -Price: per piece -Number: 10x available -Dimensions: 85/95/H78 mm -Weight: 0.6 kg/piece

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standpipe valve for wash basin -Number: 23 pieces Ø 32 mm x 295 mm -Price: per piece -Weight: 0.3 kg

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 63 mm -Weight: 0.6 kg

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe seal, shut-off ring -Pipe sealing cushion: DN1600 -Diameter: 1560 mm -without: rubber seal -Dimensions: 1560/H290 mm -Weight: 255 kg

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1200 mm -Dimensions: 1200 x 450 mm -Weight: 200 kg

Tube expander, spindle, splined shaft -Splined shaft: mounting shaft O 45 mm -Wedge: outer diameter 40/49/58 mm splined shaft cone adjustable -Dimensions: see techn. Drawing with the photos -Dimensions: O 98 x 370 mm -Weight: 5.5 kg

Pipe expander, spindle, splined shaft -Splined shaft: Mounting shaft Ø 62 mm -Key: Outer diameter 60/70/80 mm, adjustable splined shaft cone -Dimensions: see technical drawing in the photos -Overall dimensions: Ø 135 x 445 mm -Weight: 14.4 kg

Stainless steel pipe bends, welding bends -Stainless steel pipe bend: welding bend 1.4541 W 90° -Size: 168.3 x 2.6 -Quantity: 5 sheets available -Price: per piece -Dimensions: 440/215/H167 mm -Weight: 3.6 kg/piece

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60

PE pipe extrusion line - 1-screw extruder: 60 mm Ø, 28 L/D with motor: 37 KW (50hp) with AC speed variator, electrical panel with tube head for 16 and 20 mm. - 3 m vacuum and cooling bathtub with vacuum pump: 5.5 hp. - Cooling bath: 2.5m - Drag trolley (Track): 800 x 100 with variable speed drive. - Minimum inner double coil winder: 330 Ø maximum external 1,200.

Exhaust pipe, transition piece, exhaust gas exhaust system, exhaust system -Manufacturer: Metaloterm, transition piece without flange for exhaust system ADAS -Type: LOT: PN91564 0914 -Dimensions: see photos -Total dimensions: Ø270 x 290 mm -Weight: 2 kg

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions: 23 pieces, mostly with connecting pipe -Diameter: 75 to 400 mm -Quantity/Size: see photo parts list -Price/Fee: complete -Transport dimensions. 1200/800/H300mm Total weight: 95 kg

Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamping brackets, pipe clamps, pipe clamps -Pipe clamp: Pipe clamp with quick-release fastener -Clamping range: Ø 302 to 315 mm -Number: 5x clamps available -Price per piece -Dimensions: 325/95/H435 mm -Weight: 5.1kg/pcs

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm -Dimension: 1320/670/H1700 mm -Own weight: 287 kg

1) Drill pipe BTA Ø 43 x 2700 - 20 pcs; 2) Drill pipe BTA Ø 26 x 2700 - 40 pcs; 3) Drill pipe BTA Ø 22 x 2700 - 24 pcs;

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 450 kg range L-W-H: 1100x800x1500 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: up to approx. 950 mm, see photos -Load capacity: kg -Dimension: 1320/600/H1300 mm -Own weight: 88 kg

Seam closer Schechtel MS Manual Length 1 m

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8 -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Machine type: Bronx six-roll straightener 6CR 4BW incl. saw and roller tables Working range: Tube: from Ø 15 mm to Ø 54 mm Make Bronx, similar to Kieserling, type: Bronx 6CR 4BW

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m

AF/Armafix pipe supports, pipe supports -Manufacturer: Armacell, Armafix AF pipe support FX-2-60/64 AF-2 box with 24 pcs. -Article No.: 38407000 -Tube: Ø 60/64 mm -Quantity: 5x box available -Price: per box -Dimensions box: 390/200/H200 mm -Weight: 1,5/pc.

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Inv. Num. : 6907 Type: B/90 Producer: Curvatubi Generated:- Parameters: Tube diameter: 50-60 mm

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Pipe vise, pipe stand, pipe vise, plumber vise -Pipe vise: foldable -Max. clamping range: up to Ø 120 mm -Dimensions: 250/80/H435 mm -Weight: 9.6 kg

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: TEEKAY, pipe coupling AXILOCK-S Type IV -Inside: Ø 57 mm / 2.2 inch -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 95/85/H90 mm -Weight: 0.9 kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm -Band width: 15 mm -Quantity: 3x bags with 250 pieces available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 2.5 kg/cart.

Screw clamps, pipe clamps, pipe fixings, hose clamps, cable clamps -Manufacturer: Norma, pipe clamps, 100 pieces -Type: Ø26x15 MM W1D -Clamping range: 26 mm -Band width: 15 mm -Quantity: 7 bags of 100 pieces each available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 1.9 kg/bag

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 33 pieces -Type: RSGU 8/15 -Clamping range: 8 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 30/21/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 99 pieces -Type: RSGU1 10/15 -Clamping range: 10 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 200 pieces -Type: Ø11x15 W1 -Clamping range: 11 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Pipe clamps: 90 pieces -Type: Ø12x15 -Clamping range: 12 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 40/28/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 89 pieces -Type: RSGU1 15/15 -Clamping range: 15 mm -Band width: 15 mm -Dimensions each: 40/28/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Kale, pipe clamps 139 pieces -Type: Ø26x15 mm W1 -Clamping range: 26 mm -Band width: 15 mm -Dimensions each: 54/38/H15 mm -Weight: kg

Offer 23291 Specifications: End processing machine for pipes with six-fold turret - tool holder Tube diameter 6 - 40 mm Max. forming length 100 mm Drive 400 V / 7.5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Key data: 60

Composite Tube Extrusion Line: A- Extruder, brand: Sterling, 1 spindle: 60 mm Ø 25L/D, Motor: 25 hp with variable speed drive and electrical panel. B- Head for small tube: 0.5 mm and more. C- Water-cooled bathtub: 9 meters with pump and tank. D- Tow Cart, Brand: Mild Ltd Boston: 700x150, Motor Output: 1.5kw with variable speed drive. E- Double winder with guide: 600 mm Ø

Immediately available exhaust pipe used.