pipe bending used for sale

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8 to 3 -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3 (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm wall strength: / mm bending radius min.: 1,5 x D - 2,0 x D mm control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW Tube diameter: 4 – 28 mm Wall thickness: on request Minimum bending radius: 1.5 × D – 2.0 × D Control system: Siemens LOGO! Hydraulic flow rate: 4.5 l/min Max. bending angle: ±190° Rated pressure: 250 bar Operating pressure: 3,095 bar Total power requirement: 1.5 kW Additional Information Hydraulic cylinder drive with roller chain transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

with CNC control and programmable bending angles Control voltage: 24 V-2.8 A tubes Outer diameter up to approx. 16 mm. Auction-ID: A7-49604-34

Pipe Bending and Notching Machine Set – JD2 Model 32 + JD2 Notch Master Description Complete pipe processing set consisting of a JD2 Model 32 pipe bending machine and a JD2 Notch Master pipe notching machine. The system enables the complete fabrication of pipe structures – from bending to precise joint preparation. Technical Specifications Manufacturer: JD Squared (USA) Tube Bending Machine – Model 32 • Mechanical drive (ratchet system) • Maximum bending angle: 180° • Tube diameter: approx. Ø12 – Ø63 mm • Robust industrial design Tools included: • Dies for 22 mm and 25 mm tubes Other die sizes are available for this model Pipe notcher – Notch Master • Hole saw cutting system • Adjustable angle: 0–50° • Tube diameter: approx. Ø19 – Ø76 mm • Precision bearing construction Features • Complete system: Bending + connection preparatio ...

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no

Remaining stock exhaust expansion joints Exhaust expansion joints in stainless steel with welded on 10 piece DN 130, height 305 mm 5 piece DN 105, height 290 mm 4 piece DN 145, height 240 mm 2 piece DN 135, height 240 mm 1 piece DN 95, height 270 mm 1 piece DN 160, height 230 mm 1 piece DN 215, height 470 mm 1 piece DN 210, height 300 mm 1 piece DN 130, height 320 mm 4 piece DN 160, height 300 mm 4 piece DN 260, height 330 mm 4 piece DN 205, height 315 mm 1 piece DN 220, height 260 mm 2 piece DN 260, height 325 mm 2 piece DN 310, height 325 mm 2 piece DN 340, height 325 mm 1 piece DN 305, height 330 mm 2 piece DN 220, height 300 mm 1 piece DN 135, height 245 mm This item is only fully protects

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Injection pipe,Wartsila 8L20 Part no: 167012 NEW

Recon Part number: 1227 7624 / 1227 5580 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.

According to the description below

Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...

Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm

Raw steel DN 1000 wall thicknesses from 11.9-15.7 mm PE coated inside coated length: 1-3 m in short pieces 5-18 m long pieces Inside length 18 m coated steel pipes DN 1200 PE-jacketed

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

- Tube Bundle 12276572 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies a ...

- Oil line oil pipeline MWM 12302232 - Suitable for several motors - Please note! Price per piece! - 12302232 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...

- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...

- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Cooling water line MWM 12300538 - Suitable for several motors - Please note! Price per piece! - References- > 12300535 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...

- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...

Hyundai RB Onsan Factory, located at Ulsan in South Korea produces welded pipes by means of LSAW – Longitudinal Submerged Arc Welding process. The line is offered complete, featuring advanced HAEUSLER (Switzerland) core equipment. This facility is capable of producing welded pipes with the following specifications: Diameter: 22 to 80 inches Thickness: 6.4 to 25.4 mm Length: 6,000 to 12,200 mm The production line is equipped with a comprehensive suite of machinery altogether ensuring seamless and efficient production of LSAW pipes, including: • Plate edge milling • 3-roll bending • Post bending • Tack welding • Inside welding • Outside welding • Copander • End facing • Pipe inside washing • Hydrostatic tester • X-ray • Semi-correction • Pipe roll conveyor with skid system

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling

Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Korea). Based on excellent production capacity achieved over more than 25 years’ experience, Hyundai RB developed its own S.A.W. pipe production lines featuring JCO Press Bending. LSAW Welded Pipe Production Line Main Equipment and features: Shot Blasting – Max 6m/min x width 4,800 Edge milling – Φ800 cutter type x 130kw – Quick tool changing – Max. milling speed: 6m/min. – Automatic calculation of number of milling – Automatic width checking Edge-Bending (Pre-Bending) – 1,500 ton/8t ~60t/6~13.5m – Quick size changing – Max. bending thick.: 60mm JCO Press Bending – 6,000/8,000/10,000 ton (max.13.5M) – PLC with CNC (Recipe memory)  ...

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.