pipe bending used for sale

Auction-ID: A1-49575-111

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8 to 3 1/4 -Dimensions: 1020/310/H170 mm -Weight: 28 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 27/21 mm (pipe size 3/4 /1/2) -Socket: Ø 39 mm -Price: complete -Dimensions: 145/140/H75 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 1x 40 mm, 1x 60 mm -Socket: Ø 32 mm -Price: complete -Dimensions: 130/270/H115 mm -Weight: 8.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 3 pieces -Profile diameter: 1/2 1 1 1/4 , dimensions see photos -Socket: Ø 25 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 6 pieces -Profile diameter: 32 to 80 mm, see photos -Socket: Ø 36 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 50.1 kg

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8 -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 1 1/4 -Hole: Ø 20 mm -Dimensions: see photos -Dimensions: Ø 72 x 90 mm -Weight: 1.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 16 mm -Dimensions: see photos -Dimensions: 300/97/H100 mm -Weight: 3.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Hilmor, aluminum tube bending tool for profile bending machine -Profile diameter: 16 mm -Dimensions: see photos -Dimensions: 118/110/H58 mm -Weight: 0.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Ulisch, tube bending tool made for profile bending machine -Type: 3/8 -Hole: Ø 26 mm -Dimensions: see photos -Dimensions: 76/40/H80 mm -Weight: 0.7 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 4 pieces -Profile diameter: 21 mm -Hole: Ø 36 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 205/93/H65 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 26 mm -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 87/50/H66 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm

tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...

Profiles bending roll Tauring Alfa 70H2 year 2003 Used machine in perfect working condition Technical data: -Hydraulic section bending machine with digital readout -dual pre-pinch pyramid roll configuration 3 rolls powered driven - Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube size 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED ::::::

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8 to 3 -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3 (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm wall strength: / mm bending radius min.: 1,5 x D - 2,0 x D mm control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW Tube diameter: 4 – 28 mm Wall thickness: on request Minimum bending radius: 1.5 × D – 2.0 × D Control system: Siemens LOGO! Hydraulic flow rate: 4.5 l/min Max. bending angle: ±190° Rated pressure: 250 bar Operating pressure: 3,095 bar Total power requirement: 1.5 kW Additional Information Hydraulic cylinder drive with roller chain transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...