pipe bend used for sale

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Stainless steel pipe bend, welded bend -Size: 40 x 1.5 mm 90° Price: complete -Quantity: 39 pieces -Weight: 7 kg

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Auction-ID: A1-47154-187

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm

tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

tube diameter: . mm wall strength: 15 St52 und Edelstahl mm bending radius min.: 6-120 mm : : 6-42 mm Hydraulikrohre dimensions: L/B/H 2000x2000x1300 mm operating pressure: 200 bar filling amount: ca. 70 l 0: 20000 ml 0: 5,5 kW voltage: 400 V rated current: max. 16 A control: 4/3 Wege-Ventil bending angle max.: 150 ° Duty cycle: 100 % Radius range between: 2xD und 3,5 x D total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact  ...

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...

Profiles bending roll Tauring Alfa 70H2 year 2003 Used machine in perfect working condition Technical data: -Hydraulic section bending machine with digital readout -dual pre-pinch pyramid roll configuration 3 rolls powered driven - Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube size 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED ::::::

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

MIG/MAG hose package, MIG/MAG welding torch, MIG/MAG Multilock pipe bend, torch body -Manufacturer: Fronius, MIG/MAG Multilock pipe bend Ovp -Type: ML AL3000/AW4000 45 L148 - Type: 34,0350,1855 -Number: 2x burner bodies available -Price: per piece -Dimensions box: 325/125/H75 mm -Weight: 0.4 kg/piece

MIG/MAG hose package, MIG/MAG welding torch, MIG/MAG Multilock pipe bend, torch body -Manufacturer: Fronius, MIG/MAG Multilock pipe bend Ovp -Type: ML AL3000/AW4000 45 L157 -Type: 34,0350,1859 -Number: 2x burner bodies available -Price: per piece -Dimensions box: 325/125/H75 mm -Weight: 0.4 kg/piece

flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 2 pieces -Type: EN10253-1 S235 Ø 139.7 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:370/170/H140 mm -Weight: 4 kg/piece

flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 5 pieces -Type: EN10253-1 S235 Ø 159.0 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:410/195/H160 mm -Weight: 6.3 kg/piece

flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 5 pieces -Type: EN10253-1 S235 Ø 219.10 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:410/195/H160 mm -Weight: 17 kg/piece

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8 to 3 -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3 (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material / Max Capacity / Min Radius Flat / 1 1/4\" / 10\" C Channel 1x2\" / 60\" Round Tube 1 1/2\" / 20\" Round Tube 2\"/60\" Diameter of rollers 1 1/2\" Maximum tube diameter 38 mm. Condition: never used / new (5) Auction-ID: A7-46642-173

Model: Swagelok MS-HTB-6M Type: Hand Tube Bender Tube Ø: 6 mm Bending radius: 15 mm Material: High-quality steel, ergonomic handle Application: Precise bending of pipes for hydraulics, pneumatics and process plants Special features: Exact angle control Minimizes ovalization and wrinkling Compatible with Swagelok pipe fittings Weight incl. packaging approx. 4kg Auction-ID: A1-46686-1033

Hydraulic Pipe Bender Compressive force 16t 8 pieces of bending elements from 1/2\" to 3\" Condition: never used / new (5) Auction-ID: A7-46642-71

Pipe bender - Power 3/8\" to 2\" pipe - Tools for 3/8\" - Incl. base frame see pictures Auction-ID: A7-46642-3

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17038

Auction-ID: A1-47154-199

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Auction-ID: A1-41277-248

used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no

Remaining stock exhaust expansion joints Exhaust expansion joints in stainless steel with welded on 10 piece DN 130, height 305 mm 5 piece DN 105, height 290 mm 4 piece DN 145, height 240 mm 2 piece DN 135, height 240 mm 1 piece DN 95, height 270 mm 1 piece DN 160, height 230 mm 1 piece DN 215, height 470 mm 1 piece DN 210, height 300 mm 1 piece DN 130, height 320 mm 4 piece DN 160, height 300 mm 4 piece DN 260, height 330 mm 4 piece DN 205, height 315 mm 1 piece DN 220, height 260 mm 2 piece DN 260, height 325 mm 2 piece DN 310, height 325 mm 2 piece DN 340, height 325 mm 1 piece DN 305, height 330 mm 2 piece DN 220, height 300 mm 1 piece DN 135, height 245 mm This item is only fully protects

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.