127,909 used machines on RESALE, but how to find them? Machine Search
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 100 t, 3000 mm
Hydr. CNC Press Brake AMADA 3m, 100 ton without tools !
Control SAFAN ... TS 1 Thrust... 50t Bending length ... 2550mm controlled axes ... 4 Drive... Electric Max. ram stroke ... 215mm Main engine power ... 9kW Machine weight ... 5050kg The machine is in good condition, possible to test under power.
A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
weight: 200 kg : 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm : 60 (750) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 100 x 11 (1000) mm Axis diameter: 80 mm work speed: 6,0 m/min Tool diameter: 242 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 (600) mm : 35 (900) mm L-beam: 50 x 50 x 5 (800) mm T - beam - web outwards: 60 x 7 (600) mm Axis diameter: 50 mm work speed: 4,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm work speed: 4,3 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm tube diameter: 140 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.
chamfer lenght: 3055 mm Various tooling: 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - Tool No. 4:_ 60 x 40 mm with 4-fold opening: 30, 10, 9, 7 mm, length 3050 mm, Price €750. No. 3: Bottom rail for split bottom tools (matrices) 80 x 30 mm, opening 40 mm, length 3050 mm, price €350 Tool 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Price €750. (Photo 5 & 6) Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 (800) mm : 35 (1200) mm L-beam: 50 x 50 x5 (850) mm flat steel: 60 x 10 (800) mm Axis diameter: 50 mm work speed: 4,5 m/min roll diameter -toolpieces: 155 mm total power requirement: 1,5 kW weight of the machine ca.: 0,9 Kg dimensions of the machine ca.: 0,6 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,
Offer 25995 Specifications: - Pressure capacity 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm -Max. Installation depth with straightening beam 1050 mm -Max. Installation depth without straightening beam 1400 mm - Lifting speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening beam 1300 x 400 mm with over - Threaded spindle laterally adjustable rebearings
Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,
Key data: 400 t, 30000 mm
The machine is in good technical condition, inspection and test drive is possible by prior arrangement.
Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...
WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm
VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration
Key data: 160 t, 3700 mm
Control Delem ... DA - 56 s Thrust... 160t Bending length... 3700mm controlled axes ... 4 Drive... Hydraulic Max. ram stroke... 260mm Main engine power ... 15kW Machine weight ... 10700kg L x W x H ... 4750x1850x2660mm The machine is in good condition, possible to test under power.
Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...
VECCHIATO pre-bending press mod. SN 2000/120 - Mould table length 2000 mm - Thrust 57 Ton - Min/max length of elements to be bent 500/1500 mm - Maximum thickness of elements to be bent 40 mm - Lower bench made of flexible steel sheets - Power 2.2 kw -Volt. 380/50 - Matr. 05-05 - CE standards - Year 2005
Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes
Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used
Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the
Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used
12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used
4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons
Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2017 condition: neu mit Lagerspuren Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Runni ...
used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side ...
Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive K ...
Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in to ...
Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing ...
Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg
maximum number of results exceeded
please refine your search
