pipe bend used for sale

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serialnumber: 20610011 Year of construction: 2020 Volt / Hz / Kw: 400 V / 50 Hz / 0.75 Kw Country of origin: Germany

Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjusta ...

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, length 2020 mm -Tool angle: radius 5 mm -Dimensions: see drawing in the photos -Dimensions: 2020/27/H95 mm -Weight: 23.4 kg

Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in  ...

Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2118 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope o ...

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Key data: 3100 mm, 2700 mm, 2300 mm

Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

Press brake tool, bending tool, die, upper knife, upper tool, straight tool -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 3-piece -Total length: 143 mm / 1 x 28/45/70 mm each -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 160 mm -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...

Transnorm curved belt conveyor left bend 45°-800-700 IR900 RA2145 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjustab ...

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg