pip used for sale

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg

Kieserling two-roll straightener / complete line incl. testing system Working range: Rods from Ø 10 mm to Ø 80 mm Direction of passage: from left to right Speed: up to 75 m/min Make Kieserling & Albrecht Country of origin Germany It is a complete guideline and test line including handling and electrics.

Immediately available used exhaust pipe

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: up to approx. 950 mm, see photos -Load capacity: kg -Dimension: 1320/600/H1300 mm -Own weight: 88 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8 -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Immediately available used exhaust pipe

Immediately available used exhaust pipe

PIPE ASSEMBLY, GALLERY LINE

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

OPTIONS INCLUDED: - Laser TruFlow 3600 incl. LensLine - TruTops Tube license software - Ejector station 6m with brush table - Outer circuit diameter 250mm incl. set of clamping jaws incl. guide rollers for ejection station - SeamLine Tube - Tropical version - MDE interface - LoadMaster Tube 6m with bundling cavity, 2 clamps - Scratch-free grouping cavity LoadMaster Tube 6m - LoadMaster Tube 6m oscillating transport stroke - Pitch mandrel - Max. outer circle diameter of rectangular tubes: 250 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 6.500 mm - Max. workpiece weight: 25 kg/m / 37.5 kg/m kg - Laser Output: 3,6 kW - Laser Type: CO2 - Maximum material thickness mild steel: 10 mm - Maximum material thickness stainless steel: 6 mm - Maximum material thickness aluminium: 5 mm - Control: SIEMENS SINUMERIK 840D - Machine ON  ...

Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m

Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition

Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...

AF/Armafix pipe supports, pipe supports -Manufacturer: Armacell, Armafix AF pipe support FX-2-60/64 AF-2 box with 24 pcs. -Article No.: 38407000 -Tube: Ø 60/64 mm -Quantity: 5x box available -Price: per box -Dimensions box: 390/200/H200 mm -Weight: 1,5/pc.

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Pipe vise, pipe stand, pipe vise, plumber vise -Pipe vise: foldable -Max. clamping range: up to Ø 120 mm -Dimensions: 250/80/H435 mm -Weight: 9.6 kg

Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg

Pipe freezing device ROLLER, S Roller ́s Polar Application range: 20- 60 mm with plastic case and documents ! used, tested ! Dimensions ( case ): 520 x 375 x 125 mm

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Flexible Piping PAGUS NW 50 flange: Ø 75 mm New ! Stainless steel ! Dimensions: 500 x 80 x 80 mm

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: TEEKAY, pipe coupling AXILOCK-S Type IV -Inside: Ø 57 mm / 2.2 inch -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 95/85/H90 mm -Weight: 0.9 kg

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm -Band width: 15 mm -Quantity: 3x bags with 250 pieces available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 2.5 kg/cart.

Screw clamps, pipe clamps, pipe fixings, hose clamps, cable clamps -Manufacturer: Norma, pipe clamps, 100 pieces -Type: Ø26x15 MM W1D -Clamping range: 26 mm -Band width: 15 mm -Quantity: 7 bags of 100 pieces each available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 1.9 kg/bag

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 33 pieces -Type: RSGU 8/15 -Clamping range: 8 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 30/21/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 99 pieces -Type: RSGU1 10/15 -Clamping range: 10 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

Industrial computer PILZ PIPANEL WS15 OPEL (Delta A3300) /D /RJ45 ( WS15OPEL(Delta A3300)/D/RJ45 ) 115...230 V Screen defective !' suitable for S786 !' used, tested !' Dimensions: 480 x 310 x 400 mm

S-Mouth Pipe Wrench ALARM 1 1/2 11021 DIN 5234 68 mm Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 200 pieces -Type: Ø11x15 W1 -Clamping range: 11 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 35/23/H15 mm -Weight: kg

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Pipe clamps: 90 pieces -Type: Ø12x15 -Clamping range: 12 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 40/28/H15 mm -Weight: kg

Axial fan, axial tubular fan VENTILATORENFABRIK BUCURESTI, IDV BUCURESTI VAS400-4 0,0,0 695 - 1,125 m3/s speed: 1400 rpm motor : 0.25 kW 220 / 380 V inner diameter: Ø 400 mm New !' Dimensions: 460 x 310 x 460 mm

Corner Pipe Wrench Set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 89 pieces -Type: RSGU1 15/15 -Clamping range: 15 mm -Band width: 15 mm -Dimensions each: 40/28/H15 mm -Weight: kg

Centrifugal fan, centrifugal duct fan RUCK RK125L max. 330 m3/h impeller: Ø 180 mm Pipe diameter: Ø 120 mm motor: 0.0.00 mm 07 kW 230 V AC 50 Hz approx. 1.8 m connection cable New !' Dimensions: 270 x 220 x 250 mm

We offer new, unused seamless hot-finished line pipes with high-quality PE and PP coating. The pipes have never been installed and have been stored at their designated location since delivery. Available Specifications: 230 tons – 273 mm x 12.4 mm x 13 m, PE coating, standard: EN 10208-2, L290NB 50 tons – 273 mm x 16 mm x 13 m, PP coating, standard: EN 10208, L290NB Manufacturer Certificate (Mannesmann) available Coating by Rhenania Additional Services: Custom Pipe Cutting – Tailored to fit 40-foot containers for efficient transport International Shipping Available (Shipping costs to be covered by the buyer) Loading Services – We handle the loading process

ABC Open-end Pipe Wrench ALARM 1 1/2 11034 DIN 5234 67 mm Corner O-Point Jaw Shape for Round and Square Workpieces and Sheets Chrome Vanadium Steel New ! Dimensions: 445 x 90 x 25 mm

Manufacturer: Pedrazzoli Model: STERN B.65 Year of Manufacture: 2013 Type of Machine: Pipe End Forming Machine Certification: CE Marked Find more here - / Contact us at -

screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Kale, pipe clamps 139 pieces -Type: Ø26x15 mm W1 -Clamping range: 26 mm -Band width: 15 mm -Dimensions each: 54/38/H15 mm -Weight: kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg