pin mill used for sale

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWClamping System HSK-A 63Spindle taper HSK-A 63Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmDrive power (40% DC) 35 kWNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 30 pockets HSK-A63Tool magaz ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible.

An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible.

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - / Contact us at -

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

Manufacturer: Hurco Model: VMX1 Year of manufacture: 2004 Type of Machine: CNC milling machine Control unit: Hurco Ultimax Spindle taper: SK 40 Spindle speed: max. 10,000 rpm Milling feed: max. 11,400 mm/min Table size: approx. 760 × 355 mm Travel distances: X 660 mm / Y 355 mm / Z 455 mm Tool changer: 16 positions Motor power: max. 13 kW Weight: approx. 3,400 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - chip conveyor - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

Manufacturer: Hurco Model: VMX24i Year of construction: 2021 Type of Machine: CNC milling machine Controller: Hurco Max 5 Spindle taper: SK 40 Spindle speed: max. 12,000 rpm Working feed rate: max. 38,000 mm/min Table size: approx. 760 × 510 mm Travel distances: X 610 mm / Y 508 mm / Z 610 mm Tool changer: 30 positions Machine power: max. 19 kW Weight: approx. 4,750 kg Condition: - Used (like new), very good overall condition - Fully functional and ready for use Equipment / Accessories: - High-pressure cooling system for coolant supply through the spindle (20 bar) - Cooling air via coolant nozzles or through spindle - Workpiece position detection with 3D probe - Tool measurement using touch probes - Chip conveyor (scraper belt conveyor) - Machine vises - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon req ...

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.

Key data: 250 mm

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Sales Description ------------------- This compact CNC spindle unit comes from a precision milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of 221 cm and a robust construction designed for reliable industrial use, it is ideal for machine builders, retrofit projects, and users seeking a ready-to-install spindle for small to medium CNC applications. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate shipment. Transport can be organized by IBA - costs have to be covered by the customer. Further information can be seen in the datasheet attached as PDF-File --------------------------------------------------- Sales description This compact CNC spindle unit comes from a precision milling machine and has been completely overhauled, including the complete replacemen ...

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

TOS KURIM FNK 25A vertical milling machine was built was built in the Czech Republic by TOS KUŘIM – OS, a.s. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as precise drilling and milling of workpieces with a maximum weight of 200 kg. The machining process is performed by a reliable spindle, moving in three axes X,Y,Z with feed of 800 mm, 370 mm and 450 mm respectively. The spindle speed is adjustable from 56 to 4500 rpm, enabling precise adjustment of the parameters to the type of workpiece. The TOS KURIM FNK 25A also enables machining at various angles, thanks to its tiltable workhead. All this is complemented by a compact yet extremely rigid design that perfectly dampens any vibrations and ensures maximum process stability during even the most intensive challenges. All of this makes the TOS KURIM milling machine  ...

x-travel: 4.000 mm y-travel: 1.200 mm z-travel: 2.000 mm Control: HEIDENHAIN iTNC 530 HSCI total power requirement: 40 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 10,2 x 5,3 m High-performance CNC bed milling machine MTE BF 4200 equipped with HEIDENHAIN iTNC 530 control, ideal for precise machining of large and heavy workpieces up to 13,000 kg. The machine offers generous travels (X: 4,000 mm, Y: 1,200 mm, Z: 2,000 mm), a universal swivel milling head, and a 60-position tool changer. Fully refurbished, the machine is in very good technical and visual condition and ready for immediate operation. • Machine bed, column, and vertical saddle: cast construction, stress-relieved • Milling slide: cast construction • Universal milling head, positioned via Hirth splines, front plane 2.5°, rear plane 2.5° • Oil cooling unit for cooling the main gearbox • Spindle dr ...

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

Rotor laboratory shredder RETSCH ZM 200 (ZM200) Model: ZM200. Rotational speed: from 6000 to 18000 rpm Initial size: up to 10mm Final fineness: < 40μm With new standard cassette With stainless steel file rotor, 12 teeth Without sieves Power Consumption: 1300W Dimensions: 410 x 515 x 365mm Weight: 38Kg Year of manufacture: 2015 In excellent condition

Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Control Fanuc Spindle diameter ... 100mm Axis X ... 1270mm Axis Y ... 910mm Spindle speed ... 0-2000 rpm. Axis W ... 730mm Axis Z ... 900mm ISO 50 Max. table load ... 3000kg Clamping table surface ... 1000x1120mm Machine weight ... 11500kg L x W x H ... 5000 x 3000 x 2800mm Main engine power... 18.5kW Total power requirement ... 31kVA More info on request. The machine is ready for the viewings.

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Flat dowel cutter / groove cutter BOSCH GUF 4-22 A, 620 W

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-4

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Rotary table diameter 700 mm 24-position tool changer Cutting speed 15000 mm/min Fast feed speed 30000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-8

A deposit of €450.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-6

Edge milling machine on trolleys see pictures Condition: unchecked (6) Auction-ID: A7-45761-816

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

CNC travelling column milling machine with turntable concept used for machining CFRP components, suitable for machining plastic, CFRP and aluminium. Control Siemens 840D sl. Machine with complete enclosure with loading gate. Milling spindle 15 kW with max. 24000 1/min. 5-axis milling head S2 for aluminium profile machining CFRP and plastic. Tool holder HSK63F. Pick u-Up tool changer for 12 tools. Traversing axes X,Y,Z,A,B,C. Table swivel beam 180° rotatable (A-axis) with zero clamping system arranged on both sides to accommodate the workpiece clamping device. Dimensions table or swivel beam 3200 x 1200 mm. 8 zero-point clamping systems on each side of the table. Chip transport via belt conveyor. Dust extraction via compact dust extractor Tonga BG 32/ST/36ST. Lubrication system Vogel. Workpiece clamping via vacuum. Vacuum generator Schmalz. Very good condition available from June 2026. T ...

5-axis gantry milling machine Fooke Endura 905 linear Year of manufacture 2007 Control Siemens 840D CNC Table size: 5,000 x 3,000 mm 2-axis NC swivel milling head: A-axis +95°/-120° (0.001°) degrees C-axis +/- 275° (0.001°) degrees Distance between uprights: 4,700 mm Distance spindle - table: 1,419 mm Travels: X 5,000 mm Y 3,000 mm Z 1,500 mm Linear motors for fast feeds : X/Y/Z 65,000 mm/min. Rapid traverses: X/Y/Z 65,000 mm/min. Spindle drive power: 28 kW Spindle speeds: max. 18,000 rpm Spindle torque: max. 89 Nm Tool holder: HSK-A63 Tool positions: 20-fold autom. Tool Changer Machine weight: approx. 95,000 kg Space requirements: L x W x H 8,850 x 9,370 x 6,200 mm Accessories: Full fairing 3 x chip conveyor CNC control on swivel arm Protective covers for drives and s ...

6 x tensioning tower 680 height, 360 x 360 at the foot with Starrack Heckert pallet 400 x 400

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

Manufacturer NICOLAS CORREA Model RAPID50 Year of Manufacture 2.005 CNC HEIDENHAIN 530 HSCI Table Table surface 5,000 x 2,000 mm Number of slots T 11 Slot size T 22 mm Maximum weight on the table 30,000 kg. Routes and advances Longitudinal Course (X-Axis) 5,000 mm Transverse Course (Y-Axis) 3,100 mm Vertical Course (Z Axis) 1,200 mm Distance between columns 2,800 mm. Fast Forward Axles (X) 20,000 mm/min Fast Forward Axles (Y, Z) 30,000 mm/min Head UAD II automatic head included UAD II head positioning 0.1º / 0. 1st Speed 6,000 rpm No. of ranges 2 Power 32 kW ISO 50 head cone Hydraulic head clamping Head 2 – vertical chuck INCLUDED Accessories Automatic tool loader INCLUDED Loader positions 30 Automatic head changer INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Portable electronic  ...

NC tool milling machine FRIEDRICH DECKEL FP 3, S/N 2201-5369, 3-axis display HEIDENHAIN, NC-controlled, clamping table 770x415 mm, accessory cabinet

Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB

Card milling system MÜHLBAUER consisting of 3 elements 1 pc. mod. SCM 5000 built 1999, S/N 1827, 230 V AC, 1 pc. mod. SCM 525, built 2012, S/N M-10416, 400 V AC, total 2 units

Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.