138,471 used machines on RESALE, but how to find them? Machine Search
Feed length X-axis: 500 mm Y-axis feed length: 300 mm Feed length Z-axis: 380 mm X-axis travel: 500 mm Y-axis travel: 300 mm Travel Z-axis: 380 mm X-axis feed speed: 500 mm/min Y-axis feed speed: 500 mm/min Z-axis feed speed: 500 mm/min Speed (max.): 2,000 rpm Speed (min.): 40 rpm Weight: 1,250 kg Equipment: Documentation/Manual
Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.
Specifications: 3-axis digital display Heidenhain active Working area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle holder SK 40 Speed range n 50-2500 min-1 Feeds 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg
roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers - roller diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit: NEW - Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock - Stainless steel roller container for holding the mixture - bi-directional safety belly bars - Safety brake for NOT stop - ...
7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of Make: 2001 Control: OSP-U100L Spiral Circle Interpolation HS ATC Upper Turret: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm. C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swing diameter: 610 mm Turning diameter over face slide: 580 mm Center width approx.: 2,000 mm Recordings: BT50 Driven WZ BT50 = 40- 3000 rpm Magazine ATC 72 BT50 To turn: ≈ 36 Powered WZ: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swing diameter = 380 mm Mounts: VDI40 Turret: 8 places VDI40 Spindle: Speed range: 14 - 2800rpm at 37kW Lining: D400mm Spindle Passage: 110mm Spindle Nose: A2-11 Torque approx.: 2,000 Nm Coolant system with IK 40bar New screen New ...
- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24
Universal milling machine Hermle UWF 802M with Heidenhain TNC124 track control in super CONDITION Specifications: Year of construction approx. 1996 Rigid angle table Speed: 17 to 3550 rpm Infinitely variable feed in 3 axes from 0 to 1600 mm/min Drive Power .:6 KW Travel X/Y/Z: 500/430/400 mm Vertical Quill and Horizontal Quill - SK40 Hydraulic tightening system Weight approx. 2000 Kg Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 Track Control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> spindle brake >> operating instructions About the machine : A Hermle UWF 802M tool milling machine with Heidenhain TNC 124 route control is offered. This universal milling machine is in very good condition. A very easy-to-use route control. Lengths and radius corrections are possib ...
Attention, problem software! Start up but don't mill. Disassembly for copper. (Already removed from production area) Auction-ID: A3-46126-21667
Machine like new from the laboratory x-travel 400 mm y-travel 320 mm z-travel 400 mm Control Heidenhain TNC124 Table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivel 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirements approx. 2.00 x 2.00 x 2.00 m
Specifications: Digital 3-axis digital display HEIDENHEIN TNC 134 X-axis travel 500 mm Y-axis travel 350 mm Z-axis travel 380 mm Tool holder SK 40 vertical milling head with hydr. Tool Clamping DIN 2080 Ring Groove Table type Banquet table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories -Central lubrication - Coolant device -Operating instructions
This 4-axis PAMA Speedram 1000 was manufactured in 2004. It features an impressive X-axis travel of 12,000 mm, Y-axis travel of 4,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust spindle diameter of 160 mm and a maximum spindle speed of 3,000 rpm. If you are looking to get high-quality milling capabilities, consider the PAMA Speedram 1000 mill-turn centre we have for sale. Contact us for further details.
Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.
Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Key data: 13750 mm, 5000 mm, 1000 mm
Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95" ...
This 5-axis Zayer FP-10000 Bed Type Milling Machine was manufactured in 2006. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 4,200 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 10,000 × 3,000 mm and a maximum table load of 30,000 kg. If you are looking to get high-quality milling capabilities, consider the Zayer FP-10000 machine we have for sale. Contact us for further details.
Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible.
Specifications: Travels X/Y/Z 400 x 400 x 375 mm Max. clamping area 350 x 800 mm Speed range (12) 50 - 2240 min-1 Feed, infinitely variable 1 - 630 mm/min Rapid traverse, max. 1.4 m/min Total connected load 4.7 kW Dimensions (LxWxH), approx. 1300 x 1215 x 1700 mm Weight with pallet, approx. 1700 kg Equipment: Digital Rigid angle table Coolant Setup
Controls: Heidenhain 2-axis digital readout, without clamping systems or tools, with large table, an on-site inspection is possible.
Rated current: 25A, control voltage: 24V, operating voltage: 380V, control: DECKEL Dialog 2, weight: approx. 1.8t, without clamping systems or tools, Z-axis scale defective, screen display partially incorrect, not operational, an on-site inspection is possible.
used
- Travel X/Y/Z: 500/500/380 mm - Speed range: 50 - 2240 rpm -Power. 1.8 / 2.6 KW - Spindle brake - Feed: X-Y-Z infinitely variable 1-750 mm/min - Rapid traverse X-Y-Z 1400 mm/min - Rigid angle table 450 x 800 mm - Spindle holder SK 40 M16 (ISO 7388-1) - Weight approx. 1650 kg - Space requirements: L x W x H: approx. 1700 x 1800 x 1800 mm
FIXED BED MILLING MACHINE "CORREA" FEATURES: Dimensions • Table dimensions: 2,000 x 630 mm • Number of T-slots: 6 • T-slot dimensions: 18 mm Axis Travels • Longitudinal travel X: 1,800 mm • Cross travel Y: 800 mm • Vertical Z Travel: 800 mm Head • Head model: Manual universal • Tool clamping: Hydraulic • Taper: ISO 50 • Speed range: 25 – 3,250 rpm • Mandrel power: 16 Kw Machine feeds • Working progress: 5 - 5,000 mm/min • Fast feeds: 8,000 mm/min Weights and dimensions • Max. weight on table: 3,000 kg • Approx. machine weight: 10,000 kg • Machine dimensions: 4,920 x 2,714 x 2,417 mm
x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 6150 rpm Operating voltage 380 V CNC control heidenhain 425 Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant tank l Total power requirement 13.5 kW Machine weight approx. 3.1 t Dimensions approx. 2.20x2.70x2.35 m Hydraulic tool clamping full 4th axis + 5th axis +45° -20°
Universal tool milling machine from Stimin suitable for tooling, fixture making, mold making and training Travel distances : 320x250x300mm Speed :40-2240 rpm Mounting : SK 40 Table 600x210mm Longitudinal travel (X,Y,Z axis) 320x250x300mm Tool holder: SK 40 Vertical spindle speeds: 40-2240rpm Feeds 12-630mm/min Cjsbxicvyt Connection 50 Hz 3x 380V Spindle motor 2.2KW Machine weight approx. 1000kg Dimensions 1200x1900x1000mm
HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...
DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...
1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes
This 4-axis Gildemeister CTX -400 twin was manufactured in 2002. It features a robust turn-mill centre design, ideal for complex machining tasks. The machine is equipped with a chip conveyor system for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister CTX -400 twin turn-mill centre we have for sale. Contact us for further details.
Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg
Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame
Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup
Working area: 6000 x 1000 x 3000 mm (max stroke) Rotary table: 2000 x 2000 - load capacity: 15000 kg Max working feed: 5000 mm/min Max rapid feed: 8000 mm/min Fixings: ▪ Nose: 3000 rpm ▪ Universal Head: 3000 rpm Control: Selca 3045 PD
RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.
Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045
maximum number of results exceeded
please refine your search
50 € 
