pin mill used for sale

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

Colloid mill Manufacturer: Probst&Class (PUC) Type: K 150/0 Power: 13 kW with cross-toothed grinding set (good condition) with on-off button & small switchgear standing on feet with hopper (diameter: 660 mm) LBH: 660 x 650 x 1450 mm

small handy machine from Swabia

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 260/160/H150 mm -Weight: 10.7 kg/piece

Tool holder, milling holder, milling tool, cutter head -Adapter: SK40 M20 2 pieces -Sizes: see pictures -Price: complete -Dimension box: 205/105/H140 mm -Weight: 3 kg

tool holder, milling holder, milling tool, adapter, Weldon -Manufacturer.Gewefa, spindle tool type SK50x49x300-M24 -Hole: SK50/ Ø 29 x 300 mm -Total dimensions: Ø 98 x 440 mm -Weight: 7.0 kg

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Tool holder: Ø 32/16 mm -Price/Sale: complete -Overall dimensions: 355/180/100 mm -Total weight: 10.4 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Bore: Ø 56 mm -Guide slide: 180 mm movable -Hole spacing: 213/170 mm, Ø 18 mm -Dimensions: 285/250/H460 mm -Weight: 50 kg

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Colloid mill Manufacturer: Fryma Type: MZ-150/B Inline machine, horizontal Power: approx. 22-28 kW (type plate missing) with cross-toothed stator, normally toothed rotor installed on movable aluminium frame, on fixed castors with cable & plug Weight: approx. 350 kg LBH: 1000 x 550 x 650 mm

TABLE 500 X 800 ISO 40 CNC1600

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Radius milling cutters, end mills, end mills, milling cutters -Cutter: 8 cutting edges -Diameter: 47/65 mm -Socket: Ø 32 mm -Dimensions: Ø 65 x 130 mm -Weight: 1.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Colloid mill Manufacturer: Probst & Class (PUC) Type: JVM Item No.: 59201 Power: 9 kW with hopper with outlet chute with switchgear, cable & plug Rotor normally toothed, stator cross-toothed Weight: approx. 150-200 kg LBH: 600 x 430 x 960 mm

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350

Tool holder, milling holder, milling tool, collet holder, milling chuck -Manufacturer: Nikken, Multi-Lock Milling Chuck -Type: MCA50F-32HM-SL -Tensioning sleeve: Nikken KM32-16 -Dimensions: Ø 98 x 220 mm -Weight: 4.5 kg

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm

Bead Mill Manufacturer: Fryma No.: M11499 Type: MS-12 Year of construction: 1998 Power: 3.12 kW Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Internal volume: 0.5 l Throughput (water): 0.4 m³/h speed-controlled excenter screw pump with pressure gauge, with temperature gauge with control cabinet LBH: 950 x 550 x 750 mm

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Tool holder, milling holder, milling tool, adapter -Adaptation: SK50 13 pieces adapter -Tool holder: MK5/MK4/MK3/MK2 -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 740/500/100 mm -Weight: 54.9 kg

Bead Mill Manufacturer: Fryma Type: MS-12 Year of construction: 1992 No.: M15426 Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Power: 3.0 kW with control cabinet with speed-controlled hose pump speed-controlled rotor with temperature gauge (glass broken) with pressure gauge with double-acting mechanical seal LBH: 800 x 600 x 760 mm

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Tool holder, milling holder, milling tool, -Milling mounts: 5 pieces mount MK3 -Sizes: see pictures -Price: complete -Dimension box: 665/125/H30 mm -Weight: 6.1 kg

Tool holder, milling holder, milling tool, cutter head -Milling fixtures: 12 pieces of different designs, see photo parts list -Sizes: see pictures -Price: complete -Dimension box: 200/330/H180 mm -Weight: 14.4 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Bead Mill Manufacturer: Fryma Type: MSS-50 Year of construction: 1993 No.: M15825 Internal pressure: 2.5 bar Pressure double jacket: 2.0 bar with control cabinet Power: 45 kW Operating hours: 17 589 h very good condition as good as new grinding chamber LBH: 1600 x 1200 x 2100 mm

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm -Weight: 7.5 kg

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg