pile feeder used for sale

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 1053h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus

stainless steel; gutter dim. approx. 3750x900 mm; v.v. schedule; 400V Auction-ID: A1-43573-106

stainless steel; gutter dim. approx. 2500x1350 mm; v.v. schedules; 400V Auction-ID: A1-43573-107

stainless steel; gutter dim. approx. 2400x2000 mm; equipped with (2x) vibration motors; 400V Auction-ID: A1-43573-104

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LNS QUICK LOAD SERVO 2 / Rod Loading Magazine -Rod diameter (round) 6 - 80mm -Pole length 1.3 - 1.5 meters -Bar weight max. 67 kg -Charging time 4 - 12 seconds -Feed speed Max 100m/min -Air connection 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650Kg

Function: A high-pressure piston dosing pump or testing/conveying system for liquids, with pressure gauge (pressure gauges) and rack Auction-ID: A1-45447-56

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roles: 3; speeds: stepless;

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-146

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-152

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-112

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-149

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-36

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-150

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-148

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-145

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-151

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-147

Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997