pharmaceutical machines used for sale

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

used ilapak Delta G E horizontal bagging machine with running sealing jaws. The machine is mainly used for the production of sealing packages and protective fumigation to extend the durability of various products. The machine requires electricity, compressed air and, if necessary, water. The system can be seen in the photos without a transport table, but of course there is also the transport table. The total length of the machine is about 6400mm depth is 1160mm and height 1550mm plus labeler. The labeler is from Werner Hermann.The packaging machine is about 1600 kg heavy. Until recently, small cartons of Berliners were packed at the plant. The plant is complete and ready for loading in our warehouse in Bielefeld. Payment and shipping on request. 380 Volt Connection 50 Hz 6500 watts Weight approx. 1600 kg incl. labeler

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is  ...

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

TOP STATE - UEBERHOLT IN 2020 ! Built: 2006 Table size: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. fast puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 24mm VA: up to 15mm free of oxide designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training always regularly maintained

Spindle speed min: 9,000 Umd.min Max: 15.000 Umd.min Tip height min: 230 mm Max: 510 mm Spindle stroke: 210 mm Horiz. Table large: 700 x 1000 mm Table stroke: 1,800 mm Equipped with: - feed table - feed Hor. Grinding movement - coolant equipment - protection doors table

with 12 closing heads for top caps (Piccolo plastic caps) running direction: left - right

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Sieve, vorsieb 3 deck, bar screen. Mogensen Stangensizer 3 floors. type: VM 2036 ruettler with 2 4.6kw 1000 rpm.

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Labelling machine Neri model SL400 VTE Labelling machine for the application of self-adhesive labels on rectangular shaped objects. - construction in stainless steel and anodized aluminium; - transport of objects on a variable speed belt; - spacer unit - label riveting unit - automatic unwinding unit - variable speed label output up to 30 mt. /min; - the machine is equipped with all safety devices; - electrical system according to CEi standards; The basic machine is the SL 400 TE labeller for the application of 2 safety labels (Tamper Evident). An additional head is installed on the machine for the application of a third label on the upper face of the product. TECHNICAL DATA Supply voltage: 220/380 V. 50 Hz (415 V on request). Installed power: 3. 5 Kw Overall dimensions: mm 1960 x 1350 Height from ground: mm 1900 Net weight: Kg 500 Case size: min. 63 x 20 mm ...

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

CNC toolmill cover FP 3 NC Dialog 11 Used machine (very good) Control type Cnc Built 1990 Hours K.a. Dimensions 1800x1700x2000 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making • Travel distances: 400x400x400mm • Control: Dialog 11 Technical data • Control CNC Dialog 11 • Table 600x400mm • Longitudinal path (X,Y,Z axis) 400x400x400mm • Tool changer no • Tool holder: ISO 40 • Vertical spindle speeds: 31.5-3150rpm • Feeds 2-3600mm/min • Connection 50 Hz 3x 380V • Spindle motor 3.4KW

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

Vegetable washing machine Pea washing system Blanchier Drum Steinausleeser cleaning system Suitable for legumes, vegetables and similar products. The system was used for washing, cleaning and sorting peas.Was formerly used for washing blanching cooling Components e.g. - Acceptance tape - Leaf wind cleaner - Siebreiniger - Circulating conveyors - Wet flood canal - Stone reading - Wet sieve drum - Water collection tank with water purification drum and pump - Discharge circulating conveyor The machines are product-contacting made of stainless steel. Power approx. 10-15 to/h, depending on the product. The plant has already been dismantled, item site 01587-Riesa. A visit is possible at any time.

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

Drum/screen for Doppstadt SM - model -Chain drive (24 B1) -sandblasted, newly painted Very good condition Available drums: 1. for Doppstadt SM518 / length: 4.7 m / diameter:. 1.8 m /. Price: 19900 PLN: 4800EUR -15 x 15 mm -20 x 20 mm -25 x 25 mm -30 x 30 mm -35 x 35 mm -Fi 80mm 2. for Doppstadt SM618 / length: 5,5 m / diameter: 1.8 m /. Price: 23000 PLN: 5500 EUR -12 x 12 mm -15 x 15 mm 3. for Doppstadt SM620 / length: 5,5 m / diameter: 2.0 m /. Price: 25000 PLN: 6000EUR -10 x 10 mm - 13 x 20 mm -Fi 45 4. for Doppstadt SM718 / length: 7.1 m / diameter: 1.8 m /. Price: 27000 PLN: 6450EUR -10 x 10 mm -70 x 70 mm -Fi 150 / 1 szt. 5. for Doppstadt SM720 / length: 7.1 m / diameter: 2.0 / m /. Price: 31000 PLN: 7400EUR -12 x 12 mm

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Depositors from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957