134,755 used machines on RESALE, but how to find them? Machine Search
1 Gebr. Tube bending machine Tubomat 42 mm with accessories Technical data: Working range / pipe diameter: 6 to 42 mm as standard Max. wall thickness: approx. 3 mm to 3.25 mm (depending on material and tube diameter) Pipe push-on length (attachment length): Approx. 1,500 mm as standard Drive power: Electro-hydraulic drive with approx. 1.5 kW to 2.4 kW Electrical connection: 400 V / 50 Hz (three-phase current) Machine weight: approx. 600 kg to 1,000 kg (depending on table and fence length) ⚙️ The 4 main integrated functions (complete machining) Bending: Electro-hydraulic bending process with hydraulic pipe clamping, sliding piece adjustment and programmable or pre-selectable bending angle control (with mandrel retraction to prevent pipe kinking). Saws: Integrated pipe cross-cut saw (circular saw) for right-angled, clean cuts incl. coolant device. De ...
x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: Parts washing machine Manufacturer: Bio Circle Type: HTW II 1000 IS Year of Make: 2015 Condition: used / very good, as hardly used Offer will only be sent if a complete imprint is provided! Price 6.500 Euro incl. 19% VAT Location Warstein , Germany Reference number M-BIO-0926 DESCRIPTION We offer you a used parts washing machine from the manufacturer BIO-CIRCLE Basket diameter 975mm Payload 250kg Basket drive and heating. Exhaust fan see last picture for more data. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details in order to receive an offer with our terms and conditions of payment. Errors in the descriptions and offers are reserved
x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...
Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph
Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter ...
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: HYUNDAI WIA Model No.: L200SY Year: 2014 Condition: Used Stock number: 4923 Control System: FANUC Series 31i Model A Switch-on hours: 11750 h Maximum turning diameter: 550 mm Max. turning length: 530 mm Maximum length of travel in the X-axis: 220 mm Maximum spindle speed: 4000/6000 1/min Max. turning diameter: 240 mm Grinding diameter: 550 mm Spindle diameter: 65 mm Lathe chuck diameter: 210 mm Maximum length of travel in the ZB axis: 720 mm Maximum length of travel in the Y-axis: +-40 mm Number of all tools: 12 pieces Counter spindle power: 3.7/2.2 kW High pressure cooling: 14.5 bar Spindle drive power: 15/11 kW Length: 3045 mm Width: 1707 mm Weight: 4600 kg Height: 2021 mm 2019: Replacement of chuck and tool probe Equipment: 8 Pieces Tool Holders 4x pieces of powered tools Inner Holder Reduction Sleeves
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
Various dynamometers and gearboxes Auction-ID: A1-50076-329
Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape
DOOSAN PUMA 4100A CNC Lathe • Manufacturer: DOOSAN • Model: PUMA 4100A • Year of Manufacture: 2016 • Country of Origin: South Korea • Machine Type: Heavy-Duty CNC Turning Center • CNC Control: FANUC • Chuck Size: 12 inch • Swing Over Bed: Ø790 mm • Swing Over Saddle: Ø590 mm • Maximum Turning Diameter: Ø550 mm • Recommended Turning Diameter: Ø315 mm • Maximum Turning Length: 1,074 mm • Bar Working Capacity: Ø102 mm • Maximum Spindle Bore Diameter: Ø115 mm • Spindle Nose: ASA A2-11 • Maximum Spindle Speed: 3,000 rpm • Spindle Motor Power: 35 / 26 / 22 kW • Maximum Spindle Torque: 1,584 Nm • Spindle Gearbox: 2-Speed Gearbox • X-Axis Travel: 352 mm • Z-Axis Travel: 1.105 mm • Rapid Traverse, X-Axis: 16 m/min • Rapid Traverse, Z-Axis: 20 m/min • Turret Capacity: 12 Stations • OD Tool Size ...
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Industrial resistance spot welding machine from TECNA for the production of reproducible spot welded joints. The machine is equipped with pneumatically operated electrodes, electronic TECNA TE 91 welding control with adjustable welding parameters, water cooling and foot switches for operation. The compact design is suitable for production, assembly and workshop applications. Technical data: Manufacturer: TECNA S.p.A., Italy Equipment Type: Resistance Welding Machine / Spot Welding Machine Model: TECNA Art. 2102 Year of Make: 2011 Serial number: 08359 Control: TECNA TE 91 Mains voltage: 400 V Frequency: 50 Hz Phases: 1 Rated power at 50% duty cycle: 20 kVA Max. welding power: 62 kVA Secondary open-circuit voltage: 4 V Max. secondary short-circuit current: 19 kA Max. electrode force: 187 daN (approx. 1.87 kN) Required compressed air pressure: 6.5 bar Drive electrodes: ...
width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.
width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
150 € 
