137,086 used machines on RESALE, but how to find them? Machine Search
Model: SUN2000-8KTL-M1 EFFICIENCY Max efficiency: 98.6 % European weighted efficiency: 98.0 % INLET (PV) Recommended maximum PV power: 12 000 Wp Max input voltage: 1 100 V Operating voltage range: 140 – 980 V Start-up voltage: 200 V Nominal input voltage: 600 V Max Rated Input Current: 13.5A Max short-circuit current: 19.5 A Number of MPPTs: 2 Max inputs for MPPT: 1 INPUT (BATTERY) Compatible Battery: HUAWEI Smart String ESS LUNA2000 5 kWh – 30 kWh Operating voltage range: 600 – 980 V Max operating current: 16.7 A Max charging power: 10 000 W Max discharge power: 8 800 W OUTPUT (NETWORKED) Grid connection: three-phase Rated AC power: 8 000 W Max apparent power: 8 800 VA Rated output voltage: 220 / 380 V – 230 / 400 V – 240 / 415 V, 3/N/PE Rated mains frequency: 50 / 60 Hz Maximum output current: 13.5 A Adjustable Power Factor: 0.8 capacitive ~ 0.8 ...
Model: 3PH HYD6000 ZSS DC INPUT (PHOTOVOLTAIC) Typical DC Power: 9000W Maximum DC power for MPPT: 6600 W (530–850 V) Number of independent MPPTs/strings per MPPT: 2/1 Maximum DC input voltage: 1000 V Trigger voltage: 200 V DC input voltage rating: 600 V DC voltage MPPT range: 180 – 960 V DC voltage range at full load: 320 – 850 V Maximum input current for MPPT: 12.5A / 12.5A Maximum short-circuit current for MPPT: 15 A / 15 A TECHNICAL DATA BATTERY CONNECTION Compatible battery type: Lithium-ion (supplied by Zucchetti) Permissible battery voltage range: 180 – 750 V Number of independent drum channels: 1 Maximum charge/discharge power: 6000W Permissible temperature range: −10 °C ~ +50 °C Maximum charging current per battery channel: 25 A (40 A peak for 60 s) Maximum discharge current per battery channel: 25 A (40 A peak for 60 s) Charging curve: managed by ...
Photo series from before the restoration available Auction-ID: A3-46103-9423
Engine defective!, Auction-ID: A1-47424-1764
A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: right, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 2) Franz Wölfer ODRK 225L-4bT, year of manufacture: 2021, moment of inertia: 0.57kgm², rated power: 190kW, power factor: 0.94, rated speed: 3500rpm, duty type 40%: S3, weight: approx. 510kg. Including encoder POG 10. 3) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: left, weight: approx. 2190kg. Including second shaft end for emergency dri ...
The AUTO 3 PTZ decay test instruments are equipped in full compliance with the requirements of the USP <701/2040> and EP <2.9.1/2.9.2.1> pharmacopoeias. A large 320x240 pixel LCD display and alphanumeric keypad allow product and test information to be changed, such as the decay time for each station, bath and medium temperature. The total test time for the station is displayed at the end of a run. The operator intervention to stop a run is also displayed. Print the individual decay time of each sample when you have visually detected the disintegration of the sample under test by simply pressing the corresponding character key (1-6). All this information can be printed as a test report when a PCL printer is connected to the parallel printer port of the instruments. Built-in heating system uses a quiet circulation pump and heating element to preheat the outdoor water bath over ...
Used ONAF Capper for Cosmetics and Pharmaceuticals 2000 BPHTechnical Specifications & Performance DataThis compact Capping Machine is purpose-built for cosmetic and pharmaceutical applications, handling mini vials and small bottles with reliable precision. It offers a practical balance between throughput and gentle handling, making it ideal for laboratories, pilot lines, and small to medium-scale industrial packaging environments.Application: Cosmetics and pharmaceutical capping for mini vials and small bottlesMaximum speed: up to 2,000 bph (bottles per hour)Manufacturing year: 1989Electrical supply: 220 V, 50 HzIncluded equipment: Vibrating feeding hopper (automatic cap orientation and feeding)Container compatibility: Mini vials and small cylindrical bottlesContainer materials: Designed for PET and Glass bottle handlingUse cases: Batch production, lab-scale runs, quality control samplin ...
Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autocla ...
APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK, Usage: Milk Pasteuriser, Capacity: 5000 L/h
Rated power 800 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 2440 kg, Primary side: Voltage 6000 V, Current 77 A, Secondary side: Voltage 2x725 V, non-current 2x319 A
A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.
Folding Machine Stahl T 36/4-F Falzmaschine - Folding Machine Stahl T 36/4-F Baujahr / Year 1990 - Serial-No. 40562/90-163585 Flachstapelanleger / Flat Pile Feeder Falztyp / Folding Type 4 Taschen Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included
Industrial solar photovoltaic plant installed in 2021, with an original peak capacity of 676.13 kWp and a current peak capacity of 565.99 kWp. Equipped with monocrystalline PERC modules mounted on ballasted aluminium structures and 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal output of approximately 500 kW AC. Includes an ITRON meter for zero-export control, electrical panels, protection systems, cabling, cable routing, and metering and monitoring systems.
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
new
Alternator LSA 47.3 L 10 C (AREP) 6S /4P Three phase 660kVA Low voltage 400V 50Hz PF0,8 cl. H Amb 40°C 660kVA Base Rating (BE/ S1) To inform in the specifications O to 1000 m elevationm IP23 : open (default} - MD35: IM1201 (default} - Antifriction bearing - greased for life bearing - Single bearing flange - SAE 1 - 14 - Clockwise -AVR D550 - star - 6Ieads - Standard protection (Systems O - T26S001) - RAL 7035 - Gable outlet on left side (viewed from DE) - 3 Parallel CT (mounted) - 3 PT100 stator sensors - Price per piece 22.000,00 €
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Transformer - Voltage Transformer 3P 500V --> 3P 380V Manufacturer presumably Flasshoff & Klosterberg Type 45500 Power 45kVA Primaer 3x500 Secondary 3x380V + neutral Hz 50-60 Insulated IP44 Outer dimensions approx.: Transformer 100cm wide 80cm high 60cm deep Weight approx. 400kg Special price
- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2
Three-phase oil-filled transformer, not used, Manufacturer MF Trasformatori s.r.l. Rated power 3300 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 6750 kg, Primary side: Voltage 6000 V, Current 317.5 A, Secondary side: voltage 2x725 V, non-current 2x1314 A
TECHNICAL DATA: ENTRANCE: Rated voltage: 400 V ± 15% Frequency: 48–52 Hz OUTPUT: Nominal voltage: 400 V ± 3% Rated power: 12 kVA
Three-phase oil-filled transformer, not used, year of manufacture 2009, Manufacturer MF Trasformatori s.r.l. Rated power 2000 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 4680 kg, Primary side: Voltage 6000 V, Current 192.4 A, Secondary side: voltage 2x725 V, non-current 2x796 A
Key data: 45 KW, 1470 1/min
Electric motor Three-phase asynchronous motor Manufacturer : VEM Model: K21R 225M 4 KR SL TWS HW 45kW 1470 rpm Electric Motor 400V Power: 45kw Connection: 400 V NEW, orig. packaging, unused from old stock see pictures for more details.
Key data: 90 KW, 1480 1/min
Three-phase motor Part Number: HEFIE2 WK280/4-360T Manufacturer: EMOD 90KW 50/60Hz 690V 1480/1785 rpm. Water-cooled New, from stock.
Water-cooled Three-phase motor Manufacturer: Emod Type: WK132/4-230T 15kW 1430 rpm 13A New part from stock. May show traces of storage.
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts (without flight case) MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-93
Key data: 160 KW, 1480 1/min
Three-phase asynchronous motor Manufacturer : VEM Model : K21R 315 MX4 Power: 160kw Connection: 400 V Revolutions: 1480 rpm Weight: approx. 1000kg with connection cable NEW, orig. packaging, unused from stock see pictures for more details. Int.Nr.: 629 663 629 664 257672971637
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts (without flight case) MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-94
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts (without flight case) MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-92
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts in a 2-inch flight case MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-102
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts (without flight case) MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-90
Set of 4 1800 W iodide projector Supplied in a flight case of 4 with 4 ballasts in a 2-inch flight case MHN1800 lamp Luminous flux: 155,000 lumens Connectors and power supply: P17 32A mono on external ballast supplied IP55 Auction-ID: A1-50934-134
maximum number of results exceeded
please refine your search
1.172 € 
