ph used for sale

mechanical turning and tilting Capacity: 15 ton

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm total power requirement: - weight of the machine ca.: - daylight opening: 310 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 130 mm total power requirement: - weight of the machine ca.: - daylight opening: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

350 x 120mm aperture. 300mm conveyor width. 900mm line height. Left to right production. Stop on detect, but can also install a reject system to bring to M&S spec. 1170mm total machine height.

Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.

Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.

It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty run with 2-10mm second Pressing speed 2 mm second Table size 1100x650x120mm 800 mm maximum open height Table height max. 900 mm Travel of the cylinder is 400 mm Total height 2900 mm Weight 2.3 T 200 L tank Pump with 60 L output 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control PILZ Communication Operator/Press Coloured Touch Screen 10" OMRON/SIEMENS

REF-0 FORTRESS PHANTOM PIPELINE METAL DETECTOR Metal detector for the inline inspection of pumped liquids and viscous products Manufacturer: FORTRESS Model: PHANTOM Year: 2011 Inside pipe diameter: 95mm. Overall dimensions: width 900mm, length 800mm, height 1,200mm.

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

For rolls, plates, etc. With horizontal feed mechanism Working width 1050 mm, maximum inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW

For rolls, plates, etc. With horizontal feed mechanism Working width 1050 mm, maximum inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW

Hydro-mechanical high-pressure machine vice hydraulics high-pressure clamp SAFEWAY type PHV 160 Year of construction approx. 2010 jaw width 160 mm jaw height 58 mm clamping range: 0 to 315 mm Guideway height: 83 mm - clamping pressure max 6 ton. - 3 clamping ranges adjustable via plug-in bolts, 0 to 116mm, 95 to 215 mm and 195 to 315 mm- High-pressure clamp with hydraulic power amplifier - precise straightening grooves in the base surface for alignment on the machine table Text suggestion ready Ralf Dimension: 650 x 240 x 140 mm Weight 55 Kg good condition 4 pieces available, price per piece; used

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

This FAMU PHS 680 Machining centers (vertical) machine was manufactured in 2008 in Italy. The machine has a spindle speed of 30000 rpm. It is equipped with a CNC Heidenhain control unit and has 3 axis.

This JORDI PH6100 180 Bending machine was manufactured in the year 2003 in Spain. Contact us anytime for further questions.

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

Suitable for TOC analyzation in pure and highly pure water.

CNC VERTICAL MACHINING CENTER Good condition Heidenhain control X axis stroke 800 mm Y-axis stroke 600 mm Z axis stroke 450 mm Spindle speed 30,000 rpm Rapid X Y X 40.000 mm/min HSK spindle connection Table dimensions 600 x 900 mm ATC 20 tools Chip Evacuator Accessories

Werktoff : wetted areas in stainless steel Drive : 2,8 + 3,2 KW Speed : 1475 + 2900 rpm Worm drive : 1.1 KW / 1475 rpm

4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°

Refer to code 1050 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Brand: MATELEC Model: 3 phase ONAN Transformer Power rating: 1000kVA Voltage: 15 - 20kV / 410V Additional info : Dyn 11, 50Hz Available for sale Now.

Photofast –HOT MELT” is a simple automatic gluing in machine able to glue pre-folded photos, WITHOUT or WITH the insertion of a board piece support. It’s an ideal machinery to form professional photo books,(even in big sizes), digital albums, photographical blocks and children books. TECHNICAL SPECIFICATION Minimum size: Height 152,4 mm Width 160 mm Maximum size: Height 480 mm Width 400 mm Weight for photos Min: 250 gr Max: 350 gr. Board support weight: Min: 250 gr Max: 350 gr (same thickness of the folded photos) Speed up to 30 cycles/minute Power 7 Kw Machine dimension: mm 1700x1500 x1700 H Export overall dimension: mm 2000 x 1600 x 2000 (H) Machine weight about 800 Kg Export gross weight kg 1000 Power supply 400 V 3 Phase N T 50/60 Hz to BE CONFIRMED Compressed Air approx. 200 Nl/h 6 BAR

For sheets, plates, etc. With horizontal feeder Working width 1050 mm, max. inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

● System : ANYCUBIC Photon Mono X ● Operation : 3.5 inch touch screen ● Build Volume: 192mm(L)120mm(W)245mm(H) ● Light-source: high-quality filament (wavelength 405nm) ● XY Res.: 0.050mm 38402400(4K) ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01-0.15mm ● Printing Speed: MAX 60mm/h ● Rated Power: 120W ● Material: 405nm UV Resin ● Software : ANYCUBIC Photon workshop ● Connectivity : USB ● Technology: LCD-based SLA ● Printer Size: 270mm(L)290mm(W)475mm(H) ● Net Weight: ~10.75kg

Nominal pressing force: 250 tons Travel: 600mm Daylight: 1200mm Table size: 1000 x 1000mm Hydraulic rejector 63 tons Weight: 8 tons

4000 x 2000mm 10000w / 10KW FIBER laser

4000 x 2000mm 6000w / 6 KW FIBER

Drum chipper Pallmann Type: PHT 140/500 Year of construction: 1980 Passage width max. 550 mm Passage height max. 160 mm Engine 37 kW

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from CNC machining center Santenberg GTC S 2 -Hydraulic pump: Berarma 01 PHV 05 16 FHRM -Motor: AC motors 2.2 kW / 1440 rpm -Bellhousing: Raja RV250/120/082/DF -Individual components: see photos -Dimensions: 585/280/H280 mm -Weight: 46 kg

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta servo motor stepper motor from vacuum packaging system Tiromat 3000/430 -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Hydraulic tester for hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic test pump, Hydra Sleuth Hydraulic Tester -Manufacturer: Schroder, Hydra Sleuth Hydraulic Tester -Type: PHS-60-3 -Pressure max.: 3000 psi -Accessories: see photos, with wooden box -Dimensions: 775/305/H175 mm -Weight: 25 kg

Contactor, semiconductor contactor, contactor, power contactor -Square D contact module: PHD 44 E -Socket Class 8501 Type: P 1D 04 -Price: per piece -Number: 49 pieces -Dimensions: 49/47/H68 mm -Weight: 0.1 kg/piece

Stick electrodes 4.0 x 450 -Type: Phoenix K 90 S -Price: per package -Number: 1 packages available -Weight per package: 6.2 kg

Stick electrodes 4.0 x 450 -Type: Phoenix SH Ni 2 K 90 -Price: per package -Number: 2 packages available -Weight per package: 6.3 kg

Stick electrodes 4.0 x 450 -Type: Phoenix K 50 -Price: per package -Number: 5 packages available -Weight per package: 5.8 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120K -Weight per package: 6.2 kg

Stick electrodes 2.5 x 350 -Type: Phoenix Special D -Price: per package -Number: 10 packages available -Weight per package: 4.2 kg

Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120K -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg