pfauter p 400 used for sale

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

Key data: 630 mm, 8 mm, 8 kW

Panhans 446-B Dressing-Thickness Planer Combi Machine Brand: Panhans Type: 446B Year of Make: 2005 Planing width dressing/thickness planer: 630mm Knife shaft: ø120 - Z-4 Speed: 5,000 rpm Engine: 7.5 kW Planing height: 4- 225 mm Table length dressers: 2,250 mm Table length thicknesses: 1,040 mm Extra Uitvoer taflelengte: 1.000 mm, automatische hoogte versetlling met tafelblad Chip removal: max. 8 mm Feed: 7 + 14 m/min. Weight: 1,300 KG Extraction ø160 mm Condition: Fully functional tested

Name: Pneumatic Reinforcement Cylinder 3000kg Manufacturer: CHEN SOUND INDUSTRIAL CO., LTD. Type: Pneumatic Boosting Cylinder Country: Taiwan Rod diameter: 13 mm Insertion height: approx. 370 × 140 × 160 mm Short Description: Powerful pneumatic reinforcement cylinder with a capacity of 3000 kg at 5 kg/cm² pressure. Stroke: 13 mm. Robust design with mounting plates. Weight: approx. 9.35 kg. Serial number: A004477.

Chromed Air Bed, Light Barriers, Programmable, Colour Display, Side Air Tables, Complete with Standard Accessories

Chromed Air Bed, Light Barriers, Programmable, Colour Display, Side Air Tables, Complete with Standard Accessories

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

Camu decoiler 3 ton Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 gt; 130 mm - table: 950 x 660 mm - max opening: 370 mm

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Polar D 56 ECO, Year 2025 Display Program Table Table left Table right Etc. Available: at short term

Traction test Avery Denison T42 50 tons low price - ideal for retrofit The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools

circuit board, Sunnen ML3500 - ML5000 - ML2000, model PED 2202, in working condition, Contact us for info

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

ProJet 860Pro ColorJet Printer 3D printer used by 3D Systems for sale., Accessories: Depowdering station, All specifications and operating/installation conditions are in accordance with the manufacturers brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Machine dimensions in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Dimensions machine in mm (wxhxd): 1190x1160x1620

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

Age 2004, Consisting of:, Base Machine is a OMSO DM44N 2-Lane Lid Machine without the Print Heads and UV-Tunnel, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumalator as well 2 x Denesting unist each with a Vertical Magazine with Universal Helical Screws with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Label Dispenser, Label dispensers, with PLC Controls manufactured by Fuji Seal, Switzerland Outfeed Conveyor to 2-Lnae Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Vision System to monitor the Color and positioning of the Labels 400 V, 3 phase, 50 Hz, Max. Lid dimensions: [Round Lids]: Dia. 125 mm, Height: 25 mm. [Rectangular & Oval Lids]: 125 x 150 mm, Height: 25 mm, Single L ...

Age 1999, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens CORTOS OP25 display with Touch-pad Controls., Max Height of Cups: 150 mm, Min height of cups: 35 mm, Max Printing Length: 362 mm, Taper: 2 – 10 degs, Max. Cup dia: 130 mm, Min. Cup dia: 60 mm, Max speed depending on size & shape of Cups: 36,000/ hr

Age 2000, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens OP25 display with Touch-pad Controls.

Weinig high speed planing line 150 m/min with destacking, infeed system and outfeed system with automatic stacking system, Consisting of:, 01. Weinig cross chain transport for wood packages, 02. Weinig tilt hoist, 03. Transport belt for stacking sticks, 04 Weinig cross chain transport, 05 Weinig unchrambler, 06. Weinig cross chain transport, 07 Weinig automatic infeed system, 08. Weinig moulder Hydromat 30 XL, 6 spindles: B-T-R-L-T-B, max. 150 m/min, 09. Weinig transport belt, 10. Weinig outfeed system cross transport, 11. Weinig automatic stacking system, 12. Weinig cross chain transport for wood packages

Technical data of the pallet rack stand: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 3720 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,500 mm high 1,100 mm deep Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

Mobile Genset 1250Kva Commercial PIC: yytan@topglove.com.my Technical PIC: Findyrul: m_findyrultopglove.com.my

Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Book Press with Joint Forming Format: 400x520x100mm, Book Height: upto 520mm, Book Width: 120-445mm, Book thickness: 8-100mm, Capacity: ca. 150 Pieces/hour

Casing-In-Machine Block Height: 80-340mm, Block Width: 110-450mm, Block Thickness: 2-80mm, Capacity: 200-300 Pcs/h)

Punching machine Pneumatic Presser Serial-No. 17063-

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power - used power in work: about 60-65% : 11

Used, concrete block, pavers production plant Brand: Quadra Model: Q6 PR6 Year: 2004 Second Layer Concrete unit Multiforks 12 levels, fork spacing 40 cm Drying cells galvanized metal shelving system 14 tunnels, 24 rows, total capacity for 3.744 filled production boards Production board size 1400 x 700 x 50 mm Number of production boards: 1.800 pieces Moulds: Curbs and paving stones (Rampf, Kobra and spanish local brands), about 40 varieties Color mix (4 colors) Pallet humidifier (spray) 2 shelves for the storage of the moulds Palletizing Spare parts for machine and palletizing

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

LVD PPCB 150 ton x 4100 mm CNC Capacity: 150 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 90 mm/sec Working speed: 7,3 mm/sec Returning speed: 56 mm/sec Electric motor (power): 7,5 kW

The scope of delivery includes: 01x Shelf connectors, used Manufacturer: Schäfer Type: PR600 Material colour: RAL 5010 blue Total length: approx. 280 mm Shelf spacing: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | Pcs. 02x Screws M8 x 20 mm 02x Nuts M8 04x Washer M8 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)

automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

CNC Machining Center Manufacturer: Unverzagt Type: UVA 550 Plus Year of Make: 2012 Control: Siemens 828D Operating hours: approx. 3,000 Travels: X/Y/Z: 600 x 400 x 500 mm Tool locations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Wireless Push Button Hexagon Conveyor Spindle coolers IKZ (internal cooling system)

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 only 4 years in operation specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 39 t

We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...

Verpackungsmaschine / Packaging Machine Vision Pack Visionbag

Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools

Ablader für Stapel / Unloader for Piles Polar TR 1ER 110-4

• Manufacturer: AGI • Model: TOWER A3W • Year of construction: 2017 • Machine Type: Polymer Plate Processor • Machine type: Prepress machine for flexographic printing • Max. plate format: DIN A3 (297 mm x 420 mm) • Application: Development and processing of photopolymer plates • Application: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized printers • Condition: Very well maintained, ready to use

Lackierkabine Premium L7000 Innenmaße (mm) ▪ Länge: 7000 ▪ Breite: 4000 ▪ Höhe: 3700 Außenmaße (mm) ▪ Länge: 7200 ▪ Breite: 4100 ▪ Höhe: 3700 ▪ Struktur: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – Leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit

Manufacturer: Cascade Model: 11000 Probe Station Five (5) Manipulators: - 1× MH-2 with magnetic base - 4× Vacuum-base manipulators: - MH-0307-52 - MH-2 - MH-7267-46 - MH-0307-14 Three (3) Pico-Probe Power Supplies: - Two fully functional - One for parts or repair Four (4) Pico Probes Assorted DC Probe Tips – Variety of tip styles included for different probing needs. TMC Micro-G Table (Model 63-511) – Precision vibration isolation table for enhanced measurement stability. Find more here - / Contact us at -

A comprehensive package of spare parts from Tetra Pak is available. Machines: Tetra Pak packaging systems and related equipment. Spare parts: Sleeve for pipe connections, cone ID6xD6mm aluminum, cutting ring 6mm, spacers, spring 1.00x12.00x50.0mm 1. 4310, screw M5x12, sealing ring 8x14mm, O-ring 15x2mm, retaining ring DIN 471, valve spring, bearing 6001-2RS, plain bearing bush 10x12x15mm, hose connector 6mm, seal EPDM, connection nipple R1/8, guide bush 20mm, plastic sealing cap, insulating washer 22x3mm, clamping element and others. Documentation available.

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...