pfauter p 400 used for sale

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

1 x 8 sqm vacuum Rotary filters Padovan, BJ. 1985, in good condition, always perfectly maintained, complete with precoat tanks, 2 x vacuum pump and control, available immediately

50 lfm pallet rack Nedcon New, see pictures! A top shelving system from the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg Negotiation price: € 8.750,-- net from stock Offer consists of: + 19 st. frame pre-assembled, depth 110 cm, height 7 m +144 st. girder, length 2.7 m, 3050 kg load/compartment +288 St. Suspension fuses + 38 concrete anchors Payload signs documents etc. are self-evident. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Carrier orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and  ...

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

Cockpit, instrument panel with Lenkorbitrol, ads, steering wheel and Horn button etc. More components from various machines available, hydraulics, engines etc.

width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 75 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 90 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STD crankshaft / crank shaft

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PVS 125Hui or PVS 150 Hui drive 15 or 22 KW cutting kit or emulsifying module in 125 or 150 mm size available Dre PVS Hui is 125 or 150 an Inotec with an emulsifying module to an equally moderate consistency and ensure smoothness of various products and Proruzieren such as: Paste soup ketchup Mayonnaise Pesto ointments Smoties bread on strokes nut creams and other products