pet preform mould used for sale

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

Key data: 2700 kN

Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Key data: 2800 kN

Engel e-Motion 740/280 T WP with the TecnoMatic robot / Electric machine / Operating hours: approx. 9000 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 50 mm Injection weight: approx. 360 g Spray pressure: 1900 bar Dosing volume: 393 ccm Clamping unit: Clamping force: 280 t Tiebar spacing: 780x780 mm Size of the clamping plates: 1100x1100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: Production line with the TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 9000 in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 4 Control with hot runners x 64 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy ...

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg, operating hours: 10524h. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

Key data: 500 kN

Arburg 320S 500-60 Year of Make: 2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Dimensions: Weight: 2350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pumps/motor: 11 kW Heating power: 4 kW Total power: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

Key data: 800 kN

Arburg 420C 800-250 Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

ALLROUNDER SELECTA 470 S 1000 injection molding machine. (2001) Registration: 187133 – Machine 9. Clamping force: 1000 kN. EUROMAP 1000-675. Operating hours in automatic mode: 32,311 h. Cycles: 3,192,790. Hydraulic pump operating hours: 41,853 h. Injection unit: 675. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. Pump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x h. 2140 mm. Weight: 5400 kg.

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

Key data: 1500 kN

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Provider:

This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details.

Robust swivel milling machine T 26 swivel from -45 to +45 degrees Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for sheet milling work) Table extension right and left with pull-out workpiece suppor ...

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Table milling machine - swivel spindle milling machine Manufacturer: Holzkraft Model: Tecnomax T50 Year of Make: 2007 Spindle swivel Feed unit Manufacturer: Maggi Model: Steff 2034

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

It is in good cosmetic condition and in good working order.

Code: 0364 Brand: SAC Model: TS 110 Spindle moulder for milling and jointing operations on wood, plastics, composite materials, and various Technical specifications: Table dimensions mm 1100 x 900 Table height mm 860 Spindle diameter mm 40 Max applicable tool diameter mm 240 Spindle vertical stroke 2900-4500-6000-10000 rpm Motor power 5,5 Hp Overall dimensions mm 1100 x 900 x 1100 h Weight kg 780

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 AND OTHER MACHINES

A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Manufacturer: Krupp-Kautex Machine Type: KB50 Year of Make: 1987 Guard Locking 500kN Blowing volume 120 litres Max. WZ weight: 2x750kg Panel size horizontal x vertical: 700mm x 800mm Opening path: 2x 350mm Max. opening width: 1300mm Minimum tool installation height: 2x 320mm Connections for pneumatic functions: 6 Connections for hydraulic functions: 4 Blowing head: Battery head 5 liters Nozzle diameter min/max: 30/200mm (nozzle assortment available) Extruder: Helibar Screw diameter: 80mm L/D Ratio: 20 Plasticizing capacity: 175kg/h at 40 1/min, 350kg/h at 84 1/min Control: MOOG TMC4 Accessories: Debutzstation with linear device and various conveyor belts (incl.) • Machine fully functional • Demonstration in wet or dry running possible • Availability: immediately

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Manufacturer: Kautex Machine Type: KBS2-120 Year of Make: 2004 Guard locking 1,000 kN Blowing volume 220 litres Max. WZ weight: 2x 2500kg Railbar spacing horizontal/vertical: 1500 / 1600 mm Panel size horizontal x vertical: 1200mm x 1200mm Opening path: 2x 400mm Max. opening width: 1600mm Minimum tool installation height: 2x 400mm Die head: Battery head 8 liters Nozzle diameter min/max: 100/300mm (nozzle assortment available) Extruder: Helibar Screw diameter: 100mm L/D Ratio: 24 Control: SIG Kautex Accessories: various technology on request • Machine fully functional • Demonstration in wet or dry running possible

This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details.

Table dimensions: 1100 x 760 mm Motor output: 4,7 kW Spindle diameter: 30 mm reus: 4 U/min Weight: 850 kg Year: 1979 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details.

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

Table dimensions: 1200 x 730 mm Motor output: 4 kW Spindle diameter: 30 mm reus: 3000/4500/6000/7000/10000 U/min : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-station machine for containers up to 5 ltr. With double head 180 mm center to center. 2 extruders - one for each side. With integrated leak tester, mill with feed belts, bottle belt. Material feeder and mixer.

Table dimensions: 2.540 x 850 mm Motor output: 7 kW Spindle diameter: 30 mm reus: 3500/6000/8000/10000 U/min Weight: 533 kg : Ja : Ja : Elektrisch : Elektrisch swivellable: 45 ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

KAUTEX KB 150 Blow Molding Machine Year: 1981 Max. blow volume (dm³): 220 L Clamping force: 70 t Screw diameter (mm): 120/20 mm Hourly output (kg/h) (with PE): 420 kg/h Accumulator head volume (dm³): 20 L Approx. shot weight (kg): 15.2 kg Min. die diameter (mm): 100 mm Max. die diameter (mm): 350 mm Platen dimensions H x W (mm): 1200 x 1200 mm Max. platen opening (mm): 1500 mm Min. platen opening (mm): 700 mm Longitudinal head offset: 0 to +200 mm Transverse head offset: ± 10 mm False platens (mm): 150 x 2 mm Mold opening stroke (mm): 2 x 400 mm Dimensions (L x W x H): 9200 x 6000 x 5200 mm Max. tooling weight (kg): 3000 kg Max. blow pressure: 7 bar Max. hydraulic auxiliary pressure: 200 bar Number and type of hydraulic auxiliaries: 2 (5/3) Number of pneumatic auxiliaries: 2 (3/2) Unscrewing: Yes, 2 (VB2 carriage)

BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines

PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm

Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Working hours : 8000h Simple station Double head with 100 mm center distance. (2 x 500ml)

PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Working hours : 24,000h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.