pet preform mould used for sale

Including spare parts, without accessories, was maintained regularly.

Including spare parts, without accessories, was maintained regularly.

including spare parts, without accessories, was maintained regularly.

Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.

There are eight ARBURG Allrounder 220M available.

Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.

Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.

Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.

Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.

Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm

Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.

Clamping force: 750kN, opening stroke: 40kN, connected load: 18.5kW, weight: 7.5t.

Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.

Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg

Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.

Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.

With documentation, the machine should be tested.

Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.

Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.

Hydraulic operating pressure: 275bar, weight: 4.1t.

Connected load: 42kW.

Connected load: 40kVA.

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.

Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power.

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours

Weight: 9.1t, the machine is leaking and the control card is missing.

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

Operational hours counter: 59,129h, with Handling PSA 2080.

Operational pressure: 210bar, weight: 4t, with documentation, without accessories.

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.

Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.

Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.

Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.

Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.

Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.

Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.

Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.