133,930 used machines on RESALE, but how to find them? Machine Search
Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.
Clamping force: 800kN, an on-site inspection is possible.
For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover
Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.
Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a total platen size of 2070 x 1840 mm. It has a maximum injection pressure of 2280 bar and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.
Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...
Hydraulic injection moulding machine manufactured in 2009. This Arburg Allrounder 520 A 1500-70 Alldrive features a clamping force of 1,500 kN and a maximum injection pressure of 2,500 Bar. It has a screw diameter of 15/18 mm and accommodates molds with a maximum height of 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 A 1500-70 Alldrive machine we have for sale. Contact us for further details.
Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm
Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!
Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.
Block moulding machine Type: 860 AZ Manufacturer: Zenith Year: 1988 The board machine has been operated continuously at the same location since it was commissioned in 1988. For sale is not only the block machine itself but also the entire production line. The system can be used in full after purchase. The block machine was operated in a two-shift system until the end of 2023 and was then decommissioned. The plant is still complete and can be inspected at any time upon request. MACHINE DATA Block forming machine: Board machine from manufacturer Zenith, type 860 AZ, year of manufacture 1988 Production of core and face mix Control system: Simatic S5 with Zenith visualization Board size: 1,400 × 950 mm Maximum product height: 14 cm Quick mould clamping system, pneumatic Production line: Hydraulic pusher with proportional valves on the wet side Elevator with chain transport, ...
Key data: 450 mm, 63 , 25
Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only
SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981
Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990
Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more
Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...
Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg
It is a used Winkler long moulder with feed belt for sale. For products such as breads, baguettes. The machine is functional. Price on request.
Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)
SPECIFICATIONS: Table size: 2400 x 900 mm Extendable table 1 4-roller drive (with variator) Installed power: 5 kW Lockers Ø 35 mm Motorized spindle tilt +/- 45° Motorized height adjustment Dornfix clamping system
Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.
Spindle moulder with tilting shaft SCM mod. T110I - CE -Volt. 400/50 - Matr. AB/118120 - Year 1998
SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools
SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 6 Shaft drive (4 kW) Speed: 6000 rpm Installed power: 43 kW Equipped with ATS system for automatic adjustment Voltage: 380 V SPINDLE CONFIGURATION: I bottom (5 kW) II right (11 kW) III left (11 kW) III above (11 kW) IV top (5.5 kW) VI bottom (4 kW) EQUIPMENT: Complete with tools Accessories CE
SCM T130E spindle moulder Spindle diameter 40mm Overall length of spindles 180mm Spindle speed variable by inverter up to 10,000r.p.m Main motor power 7.5kw Spindle rotation right and left Electronic spindle height adjustment Electronic setting of fences Electronically adjustable roller feed 4-roller feed Maggi Variosteff 4 Feed speed control via variator CE Certified DTR documentation Year of production 2004
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
SAC SUERI fixed shaft spindle moulder mod. TS110 - CE compliant - Extended 2400 mm plates. -Volt. 400/50 - Matr. 9813 - Year 1998 - M42 - Complete with manual and CE declaration
WEINIG 5-spindle moulder mod. PROFIMAT P23E – CE compliant -Composition: - Oriz. Inf. 5.5Kw -Vert. right/left 7.5Kw - Oriz. sup. 7.5Kw - Oriz. Inf. 4 Kw - Width 230mm - ATS system - Year 1997 (CE)
WEINIG 5+1 spindle moulder mod. PROFIMAT 23 FORTEC - CE compliant - Complete with ATS device - 1st lower horizontal shaft - 2nd vert. Dx - 3rd vert. Sx - 4th upper horizontal - 5° lower horizontal - 6th universal - Width 230 mm. - Cardan drive - Year 2002
1 piece new, S 80/24D, for PUR 1 piece little used, S 80/24D, with maddock and mixed part
Key data: 3200 kN, 359 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.
Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used
Extruder S 45/22D. Single head, machine can also be equipped with double or triple head. With external leak tester. Very good condition
overhauled in 2012 and equipped with a new Beckhoff control system with touchscreen. Extruder S 50/22D for HDPE single head with Moog servo valve and WDS. Steffes lekstester is there. Very good condition. Available from stock immediately, subject to prior sale
Extruder S 36/22D. Double head, can also be supplied with single or triple head. Good condition
Extruder S 50/22D, Doppelkopf 100 Stich. Machine can also be equipped with single or triple head. Good condition
Extruder S 45/22D. Double head 70mm stitch, machine can be equipped with single head. Good condition
Extruder S 55/22D. Single head with WDR. With Beckhoff control and touch screen. Very good condition
Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.
Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.
Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...
Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.
SCM T150 spindle moulder Spindle diameter 35mm Overall length of spindles 180mm Electric spindle lift Electric fence passage Electrically adjustable angle -10/45 Spindle speed variable 3000-4500-6000-7000-10000r.p.m 5.5kw motor DTR documentation Net price
Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible.
An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.
HESTA HK 453 Year of manufacture 2002 - completely overhauled in 2021 Extruder 45 mm, 22 D Control Beckhoff New quill head, a new wall thickness control and new hybrid pump Denison The machine has been in operation for less than 50 hours since the overhaul in 2021, and in almost mint condition.
: 250 m³/min : 200 mbar total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
