pet mould used for sale

Concerns 1 concrete block mold for \"lego\" blocks 160x80x80 cm, 4 pieces per mold. Includes steel underlay! Auction-ID: A1-40134-264

Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Auction-ID: A1-40134-260

Concerns 4 concrete block molds for \"lego\" blocks 160x80x40 cm, 3 pieces per mold. Auction-ID: A1-40134-261

Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available

Assorted concrete test moulds on pallet. Moulds 150 x 150mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-152

Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  Capacity: Maximum 3,200 bph Formats: Maximum container dimensions 120 mm diameter × 350 mm height Application: Production of PET containers Configuration: 2 cavities Installed Power Preform rotation motor: 0.18 kW Clamping press motor: 7.5 kW Stretching motor: 3.0 kW Transfer arm motor: 1.3 kW Preform heating oven: 32.0 kW Preform feeder: 0.36 kW 24 VDC power supply (10 A): 1.0 kW Air reflector fan: 0.75 kW Neck cooling fan: 0.75 kW Lubrication pump: 0.07 kW Container evacuation: 0.09 kW Intermittent chain rotation: 0.18 kW Cooling Circuit Water inlet temperature: 10–20 °C Water consumption: 2 m³/h Operating pressure: 4 kg/cm² Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure O ...

Overview  This blowing machine was manufactured in 2006 by German manufacturer KRONES. The machine was part of a complete non‑returnable PET bottle filling line dedicated to fresh milk production. It was used to produce 1.0 L PET bottles and operated at a nominal speed of 9,000 bottles per hour. The machine is described as being in good condition. The equipment becomes available as the seller decided to outsource milk production and continue only cheese production at the site. Technical data  Capacity: 9,000 bottles/hour Formats: 1.0 L Application: Fresh milk Container material: PET Neck finish: 38 mm

Excellent condition - Fully operational - Loading / Transport possible! Motor rating: 5 / 6 kW Rotational speeds: 3/4/5/ 6/ 8/ 10,000 rpm Spindle stroke : 150 mm The machine has the following optional accessories Digital display in the controller of the infeed fence jaw position Motorized fence positioning via the machine's electronic system Motorized table opening for tools with diameters from 70 mm up to 250 mm Motorized feed support Table extension ( 2400mm) with extensible workpiece support length 3000 mm, 700 mm extendable to the front Integral fence jaws swinging support for fence. The fence will be lifted via handwheel from the table Wegoma feeder Variomatic 4N, 4 rolls - feed speed 0,5 - 24 m/min

- Rotary crown wrapper. - Crown diameter 250 mm. - Variable crown speed. - Variable feed speed. - Maximum dimensions of the workpiece approx. 170 x 70 mm. - Upper pneumatic grippers to stabilize the piece. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-728

Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. PLEASE NOTE, Lot is also part of Combination Lot 265! Auction-ID: A1-40134-259

- Total installed power 2.50 KW. - Adjustable feed speed. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-711

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

- Total installed power 53 KW. - Working width up to 170 mm. - Working height up to 120 mm. - 8 heads: down - right - left - right - up - up - down - universal . - Axle diameter 40 mm. - Rotation speed of the shafts 6000 rpm. - Variable feed rate. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-714

Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details.

Extruder: 80 mm Year of manufacture: 1983, completely overhauled in 2002 Control system: Siemens S7 Blow moulding head: 5 litre accumulator head Wall thickness control: 100 points One sprocket on the parallel guide needs to be replaced, otherwise in good condition. The machine has been used for the production of technical parts

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stret ...

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine.

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Code: 0329 Brand: PAOLONI Model: T 140 CF - CE Standard Spindle moulder with sliding carriage for making joints in wood, plastics, composite materials and various – CE Standard Technical data Table dimensions 1300 x 652 mm Carriage mm 1300 x 240 – Carriage travel 1180 mm Max table opening 340 mm Table height 890 mm Spindle stroke 200 mm Interchangeable spindle diameter 40 mm Spindle speed rpm 3000/4500/6000/8000/10000 Motor power 7,5 Hp Suction inlet diameter 120 mm Overall dimensions mm 1300 x 900 x 1150 h Weight kg 630

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-44836-1

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. An on-site inspection is possible.

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

SCM T130 Low Spindle Milling Machine Spindle diameter 30mm Spindle length 140mm 4kw main motor Rotation speed change on the belt 3000/4500/6000/7000/10000 Longitudinal trolley in the worktop Net price

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4544 ...

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

• Spindle moulder • Serial number 1152 • Motor power 5,50 KW • Spindle diameter 50 mm • Table size 1000 x 630 mm • Working height from the floor 850 mm • Maximum tool diameter under table approx, 150 mm • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 1300 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-143

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;