pet mould used for sale

Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

RM GROUP spindle moulder model SM120: – shaft D=35mm, with manual lift – motor kw 4 / hp 5.5 , volt 380 – 4 shaft rotation speeds: 4200/6000/8000/9700 rpm Year 2007. Machine not compliant with CE regulations, for export

Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

TECHNICAL DATA: Work table mm: 900 x 900

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

SPECIFICATIONS: Shaft: Ø 40 mm Table size: 1100 x 900 mm 1 4-roller drive Installed power: 6 HP

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017

Description

Description 4 zone mold heating Electric dosage

Description 2 fixed flow pumps.

Description HOT ROOMS 4 ZONES PREPARATION FOR 8 MOLD SHUTTERS 2 EUROMAP 12 INTERFACE SOCKETS PNEUMATIC FRONT GATE CLOSURE

Description Working hours: 35.000

Description Electrical drawing machine 12 zone mold heating software package n ° 1 and 2: extensive control of the mechanical mold functions for complex applications, extended movements software package n ° 3: production control software package n ° 5: optimization helps the operator software package n ° 6: quality assurance software package n ° 7: documentation with real value protocol

Description MACHINE WITH 2 BRUSHLESS MOVEMENTS: MOLD CLOSING AND STRING

Description Equipped with Robot S200

Description

Description

Description

Description MAGNETIC PLANS

Description MACHINE WITH ELECTRIC DRAWER

Description Electrical charge

Description working hours: 42600 24 zone mold heating

Description Hot rooms 8 areas Magnetic plates brand Tecnomagnete

Description Robot S400 year 2008 X: 1400 mm Y: 2200 mm Z: 3500 mm

Description Cartesian Robot

Description Electric charge Working hours: 6.300

Description Integrated robot: X: 1000 mm Y: 1400 mm Z: 2360 mm ROTATION 90 ° 1 BLOW (forceps) 2 EMPTY switchable

Description Increased injection group

Description ROTARY TABLE: DIAM. 700 mm

Description working hours: 26210 h Rotary table hot rooms 8 zones Magnetics plates Tecnomagnete

Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description working hours: 80000

Description inverter on pump motor

Description inverter on pump motor