pet injection used for sale

More details upon request

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Used double spiral mixer VMI, type: Petrin Kneadster KN 250 -in bakery condition- - 2 kneading machines incl. 4 extendable tank wagons for 250 kg dough - Machine with double kneading arms - Fast and even dough preparation without heating - All in stainless steel - Incl. boiler lifter for tipping onto a work table -El. Connection: 400 V, 50 Hz, 80 A, 55.3 kW - Protection class: IP 54 The dough mixers are in good condition and ready for immediate use. More pictures on request. Viewing and test run are possible.

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

scoring and folding machine for integral covers. Machine for production of integral covers in two steps 1 x Petratto SAB 100 1 x Petratto SC 10 tipo 700 1 x Petratto 90 Belt feeder Antistatic device Side lay Scoring Movable control panel with touch screen Hotmelt gluing Format : 100 x 100 cm - 8 x 8 cm Max. speed : 120 m/min Max. copies/hour: 18 000 Weight : 150 to 500 g

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine

Two identical Claudius Peters industrial blowers are available. Power: 97.2kW, speed: 1680rpm, flow rate: 58.2m³/min, pressure: 1bar, secondary pressure: 0.8bar, pressure difference: 800mbar. On-site inspection is possible.

Suitable for automatic polishing of all types of circular saw blades. Accessories: Coolant system with 60 l tank, Circular saw blade diameter: 80 - 800 mm, Rotary table speed in left or right rotation: 100 rpm, polishing wheel diameter: 250 mm, Buffing wheel bore diameter: 25 mm, Connected load approx.: 2.7kW (400V / 50Hz), Weight approx: 430 kg, Dimensions W x D x H approx.: 1160x1450x1350mm, colour: green

cutting diameter: mm saw band length: mm table height: mm weight of the machine ca.: 3 t dimensions of the machine ca.: m Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the manufact ...

Complete line for filling cans Very good condition! We have used the plant for dry pipe tobacco. It can be used for all free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the system are coordinated by an experienced team and were used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then into cans (both possible), then this is the perfect system for you. The system can be filled into tubular bags as well as directly into cans. The entire plant has a capacity of 30 cans/minute. Some components of the system, such as the capper and the labeller, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs apply). The facil ...

Groove/Perforating Machine Petratto Minibat 2; cleaned and tested; Working width 450mm; Format max.700x450mm, min.200x150mm; Creasing distance 0.1mm; Sniffer; Program memory; Incl. Grooving tool; Rental possible. Creasing and perforating machine Petratto Minibat 2; cleaned and checked; workimg width 450mm; size max.700x450mm, min.200x150mm; Creasing distance 0.1mm; vacuum feeder; program memory; incl. creasing tool; can be rent.

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper

approx. 150 rolls, Fromm PET strapping tape for hand strappers, 15.5mm – used - : Price per roll, from location: 45.-€ (net)! Manufacturer: Fromm Type: PET strapping Dimension: 15.5 x 0.85 x 1,400mm green Core 406mm Embossed Tear Force: 510kg Meters per roll: 1,400 Available: immediately Condition: New Location: 89264 Weißenhorn

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

General SKU366W1288 LocationBarneveld MakePeter Vossen No.8340 Year of construction1989 Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Horizontal tank MaterialStainless steel 1.4552 Horizontal tankcheck Capacity160 l. Sizesdia. 500x1000mm Dished frontscheck Top connectionscheck OutletDia. 50 mm Information Mounted on legscheck Floorspace1,0x0,50 m Total height0,60 mHorizontal tanksPeter VossenTanks > Horizontal tanksBrand > Peter Vossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement.

This aseptic Krones line from 2015 offers a state-of-the-art solution for the aseptic filling of sensitive, non-carbonated products such as juice, tea and dairy products. With an impressive output of 18,000 bottles per hour with a bottle volume of 1 liter, this complete line ensures maximum efficiency and productivity while maintaining product quality. Thanks to the dry aseptic technology (dry), the line not only guarantees the highest hygienic standards, but also saves valuable resources such as water and cleaning agents, which makes it particularly environmentally friendly. The line is specially designed for use with PET bottles and offers flexibility in processing different types of closures: flat caps (PCO 1810) with a diameter of 38 mm and 28 mm. As part of Krones' portfolio, this line combines state-of-the-art technology with robust, durable processing to ensure reliable, ase ...

This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.

Technical data and specifications This complete production line is suitable for silent and carbonated products. Sterilization with isolator technology STERILJET 2.160-60-113 Ventilation technology isolator aseptic Aseptic rinser with insulator technology VARIOJET 2.880-80-113 Aseptic filler with isolator technology VOLUMETIC VODM-PET 320-120-113 Capper Control unit CHECKMAT 731 FM-X+L Bottle labeling machine CONTIROLL HS 720-15 Control unit CHECKMAT 731 EM Packer VARIOPAC PRO FS Palletizer MODUPAL 1A PCS process control system container transport / conveyor belt SYNCO S container transport / conveyor belt SYNCO S Handle applicator bottle air conveyor AIRCO S MULTICO S package conveyor Pallet conveyor PALCO S Process validation AQUA VARIO DOS CAF-LIQUID ASEPTIC Hygiene Centre Sterile water treatment AQUA ASEPT L 10 m³/h CIP system VARIO CLEAN F AUT-10.000L, 45 m³/h ...

Complete aseptic PET line from Krones for still products – 30,000 bottles per hour / 0.5 l Capacity : 0.5L : Over 30,000 bottles/hour || 1.0L : 25,000 bottles/hour Closure type : 28mm Flat Cap PCO1810 Products : Still beverages such as iced tea and juice Process Type : Wet Aseptic State-of-the-art aseptic beverage production line - built in 2011 - ideal for still products such as iced tea and juices The reliable and powerful Krones aseptic line, built in 2011, is specially designed for the filling of still beverages such as iced tea and juices. With the proven wet-aseptic process, it ensures the highest hygiene standards and optimum product quality. This line is ideal for companies looking for a reliable and flexible solution for the production of premium beverages. Key features Aseptic technology: Ensures maximum product safety through sterile filling processe ...

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

The complete PET filling line is designed for the production of still water and covers the entire process from preform feeding to the palletized end product. The line includes preform feeding, PET bottle blow molding, bottle washing and gravity filling, capping with pre-turned plastic closures, labeling, bottle inspection, conveying, shrink wrapping, palletizing and stretch film wrapping. All machines are integrated to ensure stable operation, high efficiency and consistent performance at a rated speed of up to 43,000 bottles per hour.

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2016 Condition Used Stock number 103813 Production of still water Capacity 54,000 BPH Blowing, Filling & Capping Block KHS INNOPET BLOWFILL MONOBLOCK Roll-fed PE modules labeling machine, labeling stations: 2 Bottle inspection system Bottle inspector KHS Innopack Kisters SP shrink packer KHS palletizing system, double robot arm Pallet wrapping KHS, rotating arm

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2014 Condition Used Stock number 103814 Production of still water Capacity 54,000 BPH KHS InnoPET BloFill blowing, filling and closing block Blow molding machine KHS Blowmax 24S AF CE46B Compressor System Inspection Systems PRESSCO Series V FHCP3X Labeller Simpl-Cut Flex 1420-45-bl , 2021 Shrink packer KHS Innopack Kisters TSP KHS Innpal PBL 1 N (H) RG 1 palletizing system Lantech SLC-AUTO pallet wrapping, 2015

High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany

Fully automated PET still water filling line designed for efficient bottle blowing, filling, capping, labeling, inspection, secondary packaging and palletizing in a synchronized production process. Manufacturer: KHS Model Filling Line Pet 32,000 BPH Year 2009 Condition Used Stock number 103812 Production of still water Capacity 32,000 BPH PET blow molder KHS Blowmax 16S Series IV Filling monoblock KHS, Mechanical filling valves: 50 Labeling Machine PE,Roll Feeding Stations: 1 Bottle inspection system Bottle inspector Palletizer Alvey 881 Lantech pallet wrapper, Model: S1500

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

Mould & Matic PET Round Lid Mold, to fit Ø95mm dia. Cups, 10-Cavity, age Dec. 2009, with Stacker Parts. Manufactured for the Gabler D600

Manufacturer: Petrol Valves Model: 24inch, 150#

Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313

Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE.

General SKU166B785 MakeJ.S. Petzholdt TypeKM 10 No.10248 Year of construction1976 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor4.36 KW Specified Features - Processing vessel Universal mixercheck Capacity10 l. Vessel sizesø 300 x 230 mm Outletø 50 mm With motorcheck 0,66 kW 220 V 3000 rpm With variable speed drivecheck Rotor speed181-392 rpm With lump breakercheck homogeniser With motorcheck 2,2/3,7 kW 380V 700/1400 rpm Rotor speed0-10000 rpm Processing vessels MaterialStainless steel 1.4552 Information With switchgearcheck Floorspace1,4 x 1,4 m Total height2 m Weight650 kg Extra SpecificationsWith vacuum pump: suction capacity: 10 m³/hProcessing vesselsJ.S. PetzholdtProcessing vessels > Processing vesselsBrand > J.S. Petzholdt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: Good Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com

Used Used Blower Sidel PET 10/10 Four 1994: Year: 1994 Condition: Good Used Blower Sidel PET 10/10 Four 1994: Model: SB010/10 FOUR Year: 1994 Speed: 10.900 bottles/hour Preform: 1881 15 gr PCO 1881 (0.5 l) and 26.5 gr ? (1.5 l) Type: rotary Number of molds: 10 Air recovery system not in place Refrigeration unit included AIR COMPRESSOR VAN TECHNOLOGY Model: VAN-37 VSD Year: 2014 Speed: 330 m3/h 10 bar Stages: 1 screw stage ? 1 set; two sets are provided to ensure production continuity in the event of a failure of one set. The set includes a screw compressor + VAN-22 kW booster. AIR COMPRESSOR KOMNINO Model: KP-1000-11/0.8 Stages: 3 Booster 10 bar Safety protections Code: W 108 More details: https://bottlingscout.com

Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: Good Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com

Used Used PET Blower Uniloy Comec ibm 42: Year: 1990 Condition: Good Used blower uniloy Comec Year: 1990 Speed: 2200 bph Model: ibm 42 Cavities: 6 Compressor: atlas copco 08 Bottles formats: 3 cl to 500 ml Preform uploader Safety protections Code: W 59 More details: https://bottlingscout.com

Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: Good Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com

Used Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Condition: Good Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Speed: 6.800 Bph Model: KSB 4 L Number of cavities: 4 Compressor not included Chiller not included Preform feeder Preform tipper Formats: Diameter Max. 110mm Length Max. 340mm Volume Max. 2.5 litri 2 Formats included: 1000 ml e 500 ml Safety protections Code: W 101 More details: https://bottlingscout.com

Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: Good Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com

Used Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Year: 2000 Condition: Good Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Model: Blomax 4 Year: 2000 Speed: 4.500 BPH Type: Rotary Number of cavities: 4 (molds included) Air recovery system Safety protections Code: W 106 More details: https://bottlingscout.com

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

Used Used Complete PET Sidel-Krones 18.000 bph: Year: 2000 Condition: Good Used Complete PET Sidel-Krones 18.000 bph: Product: Still water Speed: 18,000 l/h 2 lt (? 92) Formats: 0.5 and 2 lt Preform tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling and capping monoblock composed of: SIDEL SBO 16 Series 2 blower Type: rotary Number of molds: 16 (molds not included) Complete set included for Alaska neck processing Air recovery system NO CHILLER SIDEL ALSIM filler Year of manufacture: 2002 Rotation direction: counterclockwise Number of valves/taps: 63 Filling type: gravity Valve type: mechanical Pressurized cabin with filters AROL capper Number of heads: 12 Pre-threaded plastic cap: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (we have the drawing) Distribution system: pick & place COMBI OVERHAULED IN LATE 2024 Cap elevator: Manufacturer: AROL Type: mechanica ...

Used Used Combibloc 20.84.26 PET Tech Long 54.000 bph: Year: 2022 Condition: Good Product: still water Speed: 54.000 BPH sul 0.5 l Year: 2022 Hopper preform: Capacity: 4 m? Blower PET (including elevator and orientator): Model: CPXX-20 Year: 20 cavities Dual air recovery system (40 bar ? 6/7 bar) Chiller Filler: 84 valves Type of filling: volumetric Capper (including cap feeder): 16 heads Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 26V2 ? 25 mm Distribution system: pick & place Dryer Code: QT 754 More details: https://bottlingscout.com