We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,282 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Connected load: 17.71kW.
used
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
used
Mould thickness: 100-440mm.
used
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
used
Operational hours counter: 62,699h, with documentation, without accessories.
used
Operational hours counter: 85,318h, with documentation, without accessories.
used
Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.
used
Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.
used
Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.
used
Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.
used
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.
used
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
used
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamping force: 1600kN, stroke volume: 215cm³, injection pressure: 2020bar, power: 15kW, weight: 5.7t, including six Temperature Control Devices SINGLE and Dry Air Dryer PIOVAN.
used
Ejection stroke: 35mm, weight: 700kg.
used
Clamp force: 750kN, heating output: 11kW, weight: 3t.
used
Screw diameter: 100mm, clamping force: 13.000kN, tool installation height: 600-1550mm, weight: 69t, operational hours counter: 15,460h.
used
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Line pressure: 210bar, injection force: 1158kN, clamping force: 6000kN, opening stroke: 0-950mm, mould space: 500-1000mm, operational hours counter: 79,588h.
used
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
used
Clamping force: 800kN, weight: 4.3t.
used
Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.
used
screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
used
Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Clamping force: 550t, Gewicht: 28.5t, operational hours counter: 28,280h.
used
There are two identical injection moulding machines available.
used
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h.
used
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h.
used
Clamping force: 2500kN, clamping plate dimensions: 840x904mm, opening stroke: 520mm, screw diameter: 72mm, length: 6500mm, width: 1465mm, height: 2030mm, weight: 6.4t, operational hours counter: 100,662h.
used
Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.
used
Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.
used
There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each machine there is one Handling Robot Wittmann W731 available.
used
Closing force: 110t, max. shot weight: 280g, opening stroke: 850mm, installation height: 250-695mm, distance between the bars: 450x450mm, weight: 6.1t, with Handling Wittmann W621-480-NC4.
used
Closing force: 35t, max. shot weight: 47g, opening stroke: 530mm, installation height: 180-350mm, distance between the bars: 280x280mm, weight: 1.8t.
used
Closing force: 50t, max. shot weight: 95g, opening stroke: 610mm, installation height: 210-400mm, distance between the bars: 350x350mm, weight: 2.5t.
used
Including spare parts, without accessories, was maintained regularly.
used
Including spare parts, without accessories, was maintained regularly.
used
including spare parts, without accessories, was maintained regularly.
used
There are eight ARBURG Allrounder 220M available.
used
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.
used
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
used
Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.
used
Screw diameter: 95mm, distance between the bars: 900x800mm, max. opening path: 810mm, max. tool weight: 6.7t, operational pressure: 190bar, weight: 24t, with Industrial Robot FANUC M-16iL.
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.
used
There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.
used
Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.