pet injection mould used for sale

Control type: NC 4 Number of hours: 32,500 hours Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mold: 250/mm Max distance between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kW Closing weight: 4 T Injection weight: Dimensions length: 4.2 m Width dimensions: 1.4m Height dimensions: 4.8 m Options: Cores: 1 Robot interface: yes Bi metal: yes

Control type: CC 200 Number of hours: 35,500 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials, kuka KR60L30-4KS robots 2012

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Pressure on the material: 2120 bars Screw speed: 145 RPM CLOSING UNIT Closing force: 1300 kN Opening stroke: 850 mm Mini /Max Mold Thickness: 275 mm Max distance between tray: 800 mm Passage between columns: 470 x 470 mm Dimensions of the trays: 650 x 650 mm GENERAL Heating power: 22 kW Total installed power: 33.9 kW

Screw diameter: 22 mm Calculated injection volume: 40 cm³ Length/diameter ratio: 23 L/D Pressure on the material: 2259 bars Screw speed: 465/560 RPM Number of temperature zones: 4 N CLOSING UNIT Closing force: 500 kN Passage between columns: 320 x 320 mm Dimensions of the trays: 540 x 540 mm GENERAL Heating power: 6 kW Total installed power: 11 kW Oil quantity: 170 l. Dimension: (WxHxD) 3.2 x 1.8 x 1.31 m. Weight: 2500 Kg

Screw diameter: 55 mm Calculated injection volume: 582 cm³ Pressure on the material: 2200 bar Mini /Max Mold Thickness: 330/680 mm Passage between columns: 615 x 615 mm Dimensions of the trays: 920 x 920 mm EUROMAP 12 DIXIT 2 2 cores Central ejection Year of manufacture: 11/2002

Screw diameter: 35 mm Calculated injection volume: 144 cm³ Length/diameter ratio: 22 L/D Pressure on the material: 1500 bars Screw speed: 150 RPM CLOSING UNIT Closing force: 450 kN Opening stroke: 375 mm Mini /Max Mold Thickness: 175 mm Max distance between tray: 550 mm Passage between columns: 320 x 270 mm

Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option

Year of manufacture: 2000 Screw diameter: 25 mm Injection volume: 69 cm3 Length/Diameter ratio: 24.8 L/D Maximum injection rate: 104 cm3/s Pressure on the material: 2000 bar Temperature zones: 4 Closing force: 500 kN Mold thickness: 200 mm Heating power: 6.8 kW Total installed power: 15 kW Oil quantity: 140 L Machine dimensions: 3800 x 1280 x 1970 mm Machine weight: 4700 kg

Year of issue: 2006 Length of injection molding machine, mm: 6900 Width of injection molding machine, mm: 1700 TPA height, mm: 2500 Clamping force, tons: 320 Weight, t: 12 Screw diameter, mm: 55 Injection volume, cm³: 1026 Productivity kg / hour (РС): 187 Drive, kW: 37 Heating, kW: 18.5 Slab size, mm: 1000 Slab size, mm: 1000 Between columns, mm: 660 Between columns, mm: 660 Fastening of clamps VNUTR cont., Mm: 280 Fastening of clamps VNESHN. cont., mm: 350 KRM plate travel, mm: 670 Package height min, mm: 240 Package height max, mm: 680 Full disclosure KRM, mm: 1350 D of the landing ring fixed plate, mm: 160 D of the landing ring movable plate, mm: 100 Pusher stroke, mm: 160 Hydraulic oil grade: 46 Oil volume, lit .: 620 Oil change, hour: 9000

Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 570 x 570 Clearance between columns (hxv) [mm] 420 x 420 min./ max. mold height [mm] min 250 injection unit Screw diameter [mm] 30 Injection weight [g] 89 Injection pressure [bar] 2470 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (length x width x height) [m] 4.5 x 1.7

Krauss Maffei KM 390-160 CZ Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 400 Maximum opening width [mm] 1000mm Injection unit Screw diameter [mm] 40 Injection volume [cm3] 204 Injection weight [g] 186 Injection pressure [bar] 1860 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 21 Dimensions and weight Net weight with control cabinet [t] 7 Dimensions (length x width x height) [m] 4.5 x 1.5 x 3.7

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage

Manufacturer ENGEL Type VICTORY 330/150 TECH PRO Clamping Force [tons] 150 Manufacturing Year 2003 Screw Size [mm] 30 Number of aggregates 1 Screw Type WS10 The minimum height of the mold [mm] 300.0 weight [kg] 9100 installed power kW 47 length mm 5193 width mm 1700 height mm 2000 occupied area of 8.8 m2 occupied area with a cage 13.6 m² oil filter HC35 - SMX10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 6 CE document 49834 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-18 UDT external battery revision 30/04/2021 UDT internal revision of the battery 05.2023 UDT battery registration number N2328017536 MC49 robot (UTM-750 TW) Diagrams office E v Schematics office H v Machine diagrams E v Ma ...

Manufacturer ENGEL Type Victory 500/150 Tech Clamping Force [tons] 150 Manufacturing Year 2005 Screw Size [mm] 40 Number of aggregates 1 Screw Type TW02.1_650 D40 LD20 G1.2 WS8 1180 The minimum height of the mold [mm] 300.0 weight [kg] 9600 installed power kW 39 length mm 5196 width mm 1804 height mm 2333 occupied area 9.4 m2 occupied area with a cage 14.9 m² oil filter HC28 - SM10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 5 date of last oil change II.20 CE document 158323 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-10 MC43 robot (W 721-0303) Diagrams office E v Schematics office H v Machine diagrams E v Machine diagrams H v Control card addresses CPU 1 Analog 4 Thermo 0 Control c ...

Manufacturer / type Toshiba IS650GTW i59 Closing force [tons] 650 Year of production 2007 Screw diameter [mm] 95 Number of aggregates 1 type of screw Type: 95DBG-AT, Part # F049997, Stellite12 The minimum height of the mold [mm] 450.0 weight [kg] 32100 installed power kW 101.2 thermal insulation on the aggregate - blanket on the aggregate upper / lower YES nominal power of heaters for units KW 43.95 length mm 7940 width mm 2670 height mm 2300 occupied area of 21.2 m² occupied area with a cage 32.0 m² hydraulic pump 1 SQP43-50 hydraulic pump 2 SQP43-50 MC09 robot (W 733-0610)

Injection weight: 85 g Closing force: 700 kN State: Used Screw diameter: thirty Injection pressure: 2470 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 35 Working hours: 59684 Libra: 2350 Dimensions: 3.25 x 2 Feed hopper: NO

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 800 x 800 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] 220-520 Maximum opening width [mm] 970 Injection unit Screw diameter [mm] 55mm Injection volume [cm3] 522 Injection weight [g] 595 Injection pressure [bar] 1943 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 22.6 Dimensions and weight Net weight with control cabinet [t] 9.8 Dimensions (L x W x H) [m] 5.65 m x 1.45 m x 2.10 m

Injection weight: 121 g Closing force: 700 kN State: Used Screw diameter: 35 Injection pressure: 1820 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Installed power: 35 Working hours: 67623 Libra: 2350 Dimensions: 3.25 x 2 Feed hopper: NO

Engel ES 1350/250 HL injection molding machine Year of production - 1997 Closing unit: closing force: 2500 kN size of forming plates h: 1050 mm size of forming plates v: 650 mm min. mold height: 350 mm opening distance: 1200 mm opening stroke: 850 mm ejector stroke: 200 mm ejector force: 82 kNj Injection system: Screw diameter - 55 mm Injection volume - 618 cc Injection weight - 556 g number of heating zones: 5 nozzle stroke: 50 technical data of the robot-system Robot Engel Year of construction: 1997 handling weight: 10 kg X axis: 500mm Y axis: 1000mm Z axis: 2360mm

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48

Closing unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./max. mold height [mm] min 150 Maximum opening width [mm] 500 Injection unit Screw diameter [mm] 32 Injection volume [cm3] 75.5 Injection weight [g] 69.54 Injection pressure [bar] 1030 Dimensions and weight Net weight with control cabinet [t] 2.25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min. 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Arburg 470C 1500-350 injection molding machine Year of manufacture: 2005 Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 650 x 650 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min. 250 injection unit Screw diameter [mm] 35 Injection weight [g] 127 Injection pressure [bar] 2500 Electric-hydraulic equipment Nominal power of the pump motor [kW] 25 Heater power [kW] 16.9 Dimensions and weight Net weight with control cabinet [t] 4.56 Dimensions (L x W x H) [m] 4.60 x 1.70 x 1.80

Battenfeld Microsystem 50 injection molding machine Year of production - 2001 Unilog B4 control technical data of the clamping unit, clamping force: 50 kN size of mold plates h: 364 mm mold plate size v: 196 mm min. mold height: 100 mm max. open daylight: 300 mm opening stroke: 200 mm technical data of the injection unit screw diameter: 14 mm injection volume: 1.1cc injection pressure: 2,500 bar measures and weight machine dimensions lxbxh: 1.862 m x 0.81 m x 2.428 m total weight: 1050KG

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] 300/650 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 322 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 16.8 Dimensions and weight Net weight with control cabinet [t] 8.5 Dimensions (length x width x height) [m] 5.43m x 1.88m x 2.2m Additional equipment: 2 x Conveyor belt Safety cage Wittmann W621-1449 robot (X=590mm, Y=1200mm, Z=2500mm)

Injection weight: 166 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 1530 Column spacing: 420x420 Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 46 Working hours: 82631 Libra: 3580 Dimensions: 4.4 x 2 Feed hopper: NO Robot socket: Yes Air valve: Yes

Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8

Battenfeld TM 750/210 Closing unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./max. mold height [mm] 200 Maximum opening width [mm] 730 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g] 95 Injection pressure [bar] 2042 Dimensions and weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6

Netstal SynErgy 1500-600 injection molding machine year of production 2003 – 45kW engine – maximum clamping force 1500kN – injection unit 600 – screw diameter 50mm – injection volume 353 cc – injection weight 339 g – injection pressure 1890 bar – hydraulic ejector on the movable plate – hydraulic core on the movable plate – hydraulic core on a fixed plate – two air valves – mold height 250-550mm – mold opening stroke 0-450mm – spacing between columns 460 X 460 mm – weight of the machine 11,200 kg

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

-KM 110-380 CX PVC - Mold clamping force: 1100 kN - Mold opening force: 70 kN - Mounting plate dimensions (H x W): 745 x 770 mm - Clearance between columns (H x W): 470 x 470 mm - Mold opening stroke: 600 mm - Minimum mold height: 300 mm - Opening width: 900 mm - Ejector stroke: mm 150 - Ejector force forward / backward: 22.6 / 9.8 kN Injection unit - Screw diameter: 35 mm - Ls / D ratio: - 22.9 - Injection pressure: 2429 bar - Injection volume: cm3 154 - Injection weight 1): 140 g - Injection capacity: cm3 / s - Screw rotation speed, standard speed 390 - Plasticizing capacity 1): - with standard screw speed: g / s 22.1 Electrical and hydraulic equipment - Pump motor rated power: kW 19 - Installed heater power: kW 10.9 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2): s / mm 2.1 / 329 - Oil tank capacity: dm3 489 Dimensi ...

Arburg 420C-1000-350 with a conveyor belt Year of production: 2001 Producer: Arburg Shot weight: 210 g Closing force: 1,000 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Min mold height: 250 mm Type of control: Selogica German Installed capacity: 32.2 kw Weight: 3430 kg Dimensions: 4.4x1.7 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Arburg 470S-1300-350 hybrid with electric auger drive Year of production: 2005 Shot weight: 127 g Closing force: 1,300 kN Screw diameter: 35 mm Injection pressure: 2500 bar Column spacing: 470 x 470 mm Plate size: 650 x 650 mm Min mold height: 275 mm Type of control: Selogica German Installed power: 33.9 kW Working hours: 85,400 h Weight: 5.100 kg Dimensions: 5 x 1.8 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Clamping force [kN] 12000 Clearance between columns (hxv) [mm] 1200 x 1200 min./ max. mold height [mm] 500 - 1695 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 100 Injection volume [cm3] 4800 Injection weight [g] 4363 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 70

Arburg 420C-1300-350 with conveyor belt Year of production: 2004 Closing force: 1,300 kN Screw diameter: 50 mm Column spacing: 420 x 420 mm The size of the plates: 605x605 mm Mold height min: 250 mm Type of control: Selogica German Installed capacity: 32.2 kw Weight: 4080 kg Dimensions: 4.4x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Demag Extra 100-430 injection molding machine Year of manufacture -2004 NC control 4 Clamping force - 1000 kN Column spacing - 400X400 mm The dimensions of the boards are 540X540 mm Min. mold height - 250 mm Screw diameter - 40 mm Injection weight - 208 g Injection volume - 231 cc Injection pressure - 2025 bar Hydraulic cores - 1 Air valves - 1

Netstal S 600-230 injection molding machine year 2007 Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 617 x 600 Clearance between columns (hxv) [mm] 410 x 410 min./ max. mold height [mm] 200 - 500 Maximum opening width [mm] 540 injection unit Screw diameter [mm] 32 Injection volume [cm3] 123 Injection weight [g] 118 Injection pressure [bar] 1890

Arburg 420C-1300-675 Year of production: 2000 Shot weight: 297 g Closing force: 1,300 kN Screw diameter: 50mm Injection pressure: 2080 bar Column spacing: 420 x 420 mm Plate size: 615 x 615 mm Mold height min: 350 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 84,840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Hopper: No. Core sequence: Yes Air valve: Yes

Arburg 420C-1000-250 with a conveyor belt Year of production: 1998 Producer: Arburg Shot weight: 97 g Closing force: 1,000 kN Screw diameter: 30 mm Injection pressure: 2470 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 25 kw Weight: 3180 kg Dimensions: 4.5x1.7 m Hopper: No. Core sequence: Yes

Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised

Injection weight: 29 g Closing force: 700 kN State: Used Screw diameter: 20 Injection pressure: 2500 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 31 Working hours: 88715 Libra: 2170 Dimensions: 3.25 x 2 Feed hopper: NO

Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1155x1195 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 425/max 770 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 75 Injection volume [cm3] 1657 Injection weight [g] 1506 Injection pressure [bar] 1739

Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...

Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1250 Clearance between columns (hxv) [mm] 1120 x 1000 min./ max. mold height [mm] 600 - 2000 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 130 Injection volume [cm3] 6172 Injection weight [g] 5617 Injection pressure [bar] 1296 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (L x W x H) [m] 10.50 m x 2.65 m x 2.40 m

Arburg 420c 1000-250 Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 6.5 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (L x W x H) [m] 4.3 x 1.7 x 1.8

Krauss Maffei KM 125-390 C2+ injection molding machine Year of production - 1999 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 1250 – Mold opening force: kN 70 – Dimensions of the mounting plate (h x v): mm 745 x 770 – Clearance between columns (h x v): mm 470 x 470 – Mold opening stroke: mm 600 – Minimum mold height: mm 300 – Opening width: mm 900 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 22 / 10 injection unit – Screw diameter: mm 40 – Ls/D ratio: – 20 – Injection pressure: 1860 bar – Injection volume: cm3 204 – Inject ...

Clamping/injection matrix Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Shot weight [g] 1304 Injection pressure [bar] 1829 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 36 Dimensions and weight (approximately) Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6,91 m x 2,20 m x 2,41 m