pet injection mould used for sale

Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible.

Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. An on-site inspection is possible.

Clamping force: 1800 KN Max injection cc 500g 380V/50Hz Auction-ID: A7-45261-4

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699

Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4544 ...

steel; connection diameter approx. 90 mm; filling opening approximately 700 mm; equipped with sight glass; total height approx. 760 mm; on 2 pallets without pallets; Auction-ID: A1-43992-212

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-19

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-17

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-20

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453 Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-44996-25

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112 Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-44996-26

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 2 ...

PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

FISH FOOD / PET FOOD EXTRUSION LINE CAN HAVE MANY APLLICATIONS FROM PET FOOD TO FISH FOOD was used to produce dog food output till 2 / 3 tonnes according to formulas Extruder was well maintained MODEL BC 82, TWIN SCEWS, has rails allowing to open totally the extruder to clean screw and barrels Extruder main electric cabinet coming with the line Conditionner Wenger , stainless, model 7 DCC , new in 2000 used for 2 years extruder main electric engine new in 2000, Continuous current LAK 4180 DA 400 volts, used for 2 years pelleting device, sieve, scale, buffer bin, STOLZ coater, STG 500 with vacum pomp the cooler (STOLZ RCC SEP 22X22F ) is not any included in the line many accessories, pomps, valves are coming with the line The line is partialy diassembled, plans could be provided Visits can be planned, enquiries for further details are welcome

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

Filing Line for non-returnable PET-bottles make KRONES, Kaeser, Comag, Lachenmeier capacity 14.000 bottles/h at 0,5l bottle 12.000 bottles/h at 1,5l bottle neck finish PCO 1810 filling product carbonated water, beer and soft drinks with 15°C and 8,0 g/l CO2 year 2004 packing 3 x 2 (with and without handle) pallet 4 x ¼ Plastic pallet (600 x 400 mm) 2 x half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) control Uni Siemens S7 300 kind of current TN-S-net, 400 V, 50 Hz This complete filling line for non-returnable PET bottles was manufactured in 2004 by Krones. The line is for production of high-performance beverages and it is in good condition. consisting of: 1. Blowmoulder-Filler-Bloc KRONES Contiform S08 Incl. preformtipper Tanner, Prefromconveyor Cooling Unit KKT Kraus KLC50N Mecafill VKP-PET 2880-80-113 Neckhandling Automatic butterfly ...

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Complete PET filling line Krones / Sidel Capacity: 33.000 bph Bottle size: 1,5 ltr. PET bottles Closure: short neck PCO 28 - 1881 Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) Filling products: carbonated water and soft drinks Year of manufacturing: from 1997 - 2014 Condition: regulary maintained The line is out of production and immediately available. The line can be inspected. The line is consisting of: Blowing machine Sidel SBO 20 Serie III capacity: 36.000 bph year of manufacturing: 2010 neck size: PCO 28 - 1881 incl. cooling unit Trane-RTAC 185 year of manufacturing: 2003 incl. preform feeding: SIDEL-EBHS 2050 year of manufacturing: 2010 preform container: SIDEL-EBHS 2050 year of manufacturing: 2010 incl. preform tilting device SIDEL-EBHS 2050 year of manufacturing: 2010 incl. air conveyor system available Air co ...

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...

Auction-ID: A1-44897-94

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

Trailer with a ramp door; Auction-ID: A7-44871-55

Auction-ID: A1-45422-26