pet food used for sale

Overview The complete filling line for non-returnable PET bottles consists of filling triblock, labeller, mixer & carbonizer, blowmoulding machine and shrink wrapper. The machine is still assembled and can be visited in working condition. Capacity: 10.000 – 13.000 Fl./ h   Bottle formats: 500ml, 700ml, 1500ml Components Triblock (Rinser, Filler & Capper) | RIVI | BLOCK 50/60/12 | 2001 Rinser sites: 50 Filler sites: 60 Capper stations: 12 12.000 bph (at 1.5L) Power supply: 380/220V; 50 Hz Control voltage: 24V Electr. power: 8kW Control pressure: 6 bar Labeller | Vera Roll | 12T | 2016 Hot glue 12.000 bph  Power supply: 400V/ 50 Hz  Control voltage: 24V DC Electr. power: 3,5 kW Control pressure: 6 bar Mixer & Carbonizer | RIVI | MIX SIRIO 25 | 1993 Capacity: 25m³/ h Power supply: 3x 400V/230V  Control voltage: 24V DC Electr. power: 10kW Blowmoulding machine | Blueline | 4 HITECH | 2 ...

Preform Weight (Max): 32,5 // Neck Type: PCO

Preform Weight (Max): 17 g // Neck Type: 30/25

Output: 43200 // Bottle Size: 300-700ml

Hydraulic pump with petrol engine -Mobile hydraulic power pack with petrol engine -Unfortunately no further data available

Stainless steel storage box, transport box, pallet box, crate, box -Material: 4301 stainless steel -Number: 1x box available -Dimensions: 1150/800/H920 mm -Weight: 98kg

Gasoline engine, gas engine, propulsion engine -1 cylinder -Air cooled -Motor power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

AOKI SBIII-1000H-60 year `2014 for 18~25liter bottle

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...

HUSKY electric HPETL 230 (230 ton) year `2015 for PET preform

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input ...

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

Wet Aseptic Filling Line Krones PET 18000 bph Excellent condition Krones Dry Aseptic PET line for non-carbonated demanding products like smoothies, juices and dairy products without CO2. The line was commissioned in year 2018 by Krones and having only less than 12000 total operating hours. This line was purchased by current owner for contract filling so called Innocent Smoothies in 250ml, 360ml and 750 ml PET bottles with D38ml neck format. It has large GEA made aseptic processing plant for product treatment before filling. Blow moulder is Krones Contiform 310 PRO with 10 cavities, Contipure D preform disinfection system and for energy savings there is an infrared linear oven with ceramic reflectors and Air Wizard Plus pressurizer air recycling system. Filling and capping is made with Krones PET-Asept Bloc D, which has a wet aseptic system. Bloc contains aseptic bottle sterilizer STE ...

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

Capacity:  10.800bph in 1500ml                   18-20.000 bph 500 ml bottles Products:  Still water. After Premix upgrade suitable for carbonated and soft drinks Equipment List: Blow molder Krones Contiform 510/K784-241 Manufactured in 2008 Blower with 10 cavities Chiller KKT Kraus KLC50T/P512469/08 Manufactured in 2008 Air conveyors Europool Manufactured in 2000 Filler SARCMI Bluestar 2000/C9021 70 fillers Manufactured in 2000 Capper AROL TS-Euro PK / 17460 10 heads Manufactured in 2019 Labelling machine Krones Contiroll / N Series 745-825 Manufactured in 2000 Shrink wrapper DIMAC – Owen DIMAC  Dimac Star F / MATR. A401381 Manufactured in 2003 Shrink wrapper DIMAC – Owen DIMAC  Dimac Star FX / MATR. A401184 Manufactured in 2002 Palletizer  ACMI Rasar P135/2499 Manufactured in 2003 Feeder  ACMI 475/C2875 Manufactured in 2003 Winder TOSA MOD 121/032290 M ...

Overview The PET bottling line mainly contains machines from Krones and Meypack and was installed in 2011 in a German mineral water company. It was operated in the same location with a returnable PET bottling line and the two lines were sharing the same filler. Therefore the number of operating hours on the machines of this line are very low, as mainly returnable PET bottles were produced. The filler will we kept inside the returnable PET bottling line, therefore the line is sold without a filler. As the sales volume of non-returnable PET has reduced further, the line is stopped and for sale. All machines are still assembled and electrically connected.   Tech Specs: Capacity 20,000 bph, at 1l Suitable for carbonated and non carbonated beverages Neck type: 28 mm The Plant in Detail: Manufacturer: ---- Machine Type: PET Bottle Fedding Manufacturer: Lanfranchi Machine Type: PET Bottle Unsc ...

Overview This complete filling and packaging line for PET bottles is designed for an output of 18,000 bottles per hour and different bottle formats can be run. The line is still in production and will be vacant in spring 2024, as it will be replaced by a larger one. Individual machines  Preform tipper | Tanner | KPT-2020 | 2004 Compressor | Atlas Copco | - | 2004 Blow molder | SIG Corpoplast | BLOMAX 12 | 2004  Capacity: 18,000 bph  12 cavities Min./ max. volume: 0.2l - 3.0l  Bottle length min./ max.: 107mm/ 350mm Preform length min./ max.: 60mm/ 200mm  Dimensions (LxWxH): 6.947mm x 4.419mm x 3.357mm  Including Cooling unit, preform tipper, PET erector Filler | SIG Simonazzi (now SIDEL) | EUROSTAR 2000 | 2003 Capacity: 21,500 bph Number of filling valves: 100 Format: designed for 0.5l, others: 1.0l -1.5l  Closure type: plastic 28mm  Ozomix plant | Aeraque | Ozomix 300K | 2004 ...

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

Nissei ASB50 year 2011 Working hours 60000 Including: Drier Wittmann Drymax E30 year 2012 with 100l hopper and Feedmax S3-40 Thermostat: Regloplas 90Smart year 2014 Regloplas 90smart year 2008 Available immediately

LINE FOR FILLING PET AND GLASS BOTTLES WITH CAPS AND CAPS ALL in ONE Produced until May 2022, taken straight from production by us Can fill PET bottles of various heights, glass bottles with plastic stoppers and glass bottles with caps THE LINE NEEDS RENEWAL, was dismantled from existing production, the owner produced without a PET blow molding machine, ordered ready-to-use empty 1.5 L PET bottles. He also filled 1 L glass bottles on the same line. In addition to the capping machine, it also has a capping machine. The bottleneck is a carbonator (7000 l/h). LINE Consisting of: Filling machine 50 filling nozzles Brand: Winterwerb Type: Combilima Year: 1977: Capacity: 14,000 pcs/hour. Electrical connection:380 V Weight:10600 kg Total dimensions L 5850 mm Total dimensions W 3150 mm Total dimensions H 2300 mm Description Minimum bottle height 150mm; Maximum bottl ...

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: control: SIEMENS Simatic HMI Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Overview The BP 1800 briquette press was manufactured in 2003 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

Overview The BP 1800 briquette press was manufactured in 2004 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

-For PET or PEHD bottles -tests if the bottle is leaking by a pressure sensor in the side belts -Fill height control with radiation Spectrum TX VX 8.00.002 Serial Number: 2TG022697 More then 300 machines new and second hand on our seema .de

automatischer Rinser / Filier / Verschließer Maschine; mit Rinser mit fester Düse; mit elektronischem Durchflussmesser Schraubverschließer; mit 40 Rinserzangen; mit 40 Füllventilen; mit 8 Kappenköpfe; Teilung 113,1 mm; Durchmesser 1440 mm; im Uhrzeigersinn Drehung; für Fruchtsaft bestimmt; Produktionskappe 12 000 Flaschen / Stunde; Füllungstemp 2-5 c; installierte Leistung 14 kW; Gasdruck 8-12 bar; Luftdruck 6-8 bar; Wasserdruck 3-4 bar; 24 V; elektrisch Anschluss 380 V; 50 hz; mit Kraftschrank 18 verschiedene Arten von natürlichem Saft mit und ohne Fruchtfleisch; kalte Füllung, Ultra sauber und folgende Kühlkette flache Kunststoff-Schraubkappe 38 mm More then 300 machines new and second hand on our seema .de

ZALKIN PET-Screwcapper 6 Head amount of capping heads: 6 working direction: left-right type of closures: Twist Off More then 300 machines new and second hand on our seema .de

25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998) with screw cap feeding More then 300 machines new and second hand on our seema .de