pet filling used for sale

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022

Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

Diesel tank system - company filling station - consisting of: 1 x Storage container, 10.000 liter capacity, used 1 x fuel pump, type Eco 75, brand new Description container: according to DIN 6616-D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome cover, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is reprimed and painted on the outside. (RAL sound). L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex wo ...

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Filling machine TM Industry Belgium M 25 for filling liquids Filling range 0.5-30kg Very good condition, straight from production!

MMG MLL-1 filling machine 2019, built entirely in 316 stainless, doses all kinds of fluids both viscous and dense, you can adjust the volume of the dosing by means of a screen and work with auto activation, being able to regulate the rate or frequency of dosing. Product reception jacketed hopper which can be used to heat or cool the product, electric panel with PLC and anti drip system. Doses from 100g - 1000Kg. Piston works with a servo-motor. Hopper also has agitation for faster filling

Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately

One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016

2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Bosch PKS vacuum packing machine for coffee Packed in 250 g and 500 g packages Year 1994 / renovated in 2017 Good working condition

MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

We offer, used: Polyketting Conveyor belts - transport tracks with frequency-controlled / frequency converters on the motors for Tetra Pak beverage cartons 19 frequency-controlled motors More than 100 meters of transport track Subject to prior sale

Tetra Pak conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 meters with engines, straight pieces and curves Subject to prior sale

We offer used: Tetra Pak PT 10 Pull Tab Applicator was in operation with a Tetra Pak TBA 8 1500 ml slim line filling machine Year of construction 1997 In very good condition Subject to prior sale

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

We offer, in current condition For Tetra Pak TBA 8 Calibration gauge / Einmesslehre for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim for TBA 8 aseptic filling machines for the volumes 1000 ml slim, 1000 ml base, 1500 ml slim Subject to prior sale

We offer For Tetra Pak TBA 8 Calibration gauge for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim LSC Prior sales reserved

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

Item number: 90458-0601 Photocell for jaw system Tetra Pak aseptic filling machine

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

Article number: 90458-0601 Photocell for Tetra Pak aseptic filling machine

IWKA TZK100 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 12 to 50 mm and a maximum tube length of 235 mm, rod length 730 to 850 mm, capacity from 40 to 100 tubes per minute,compressed air 6-8 bar, machine floor space approx. 2000 x 690 mm (LxW), machine height approx. 1570 mm, machine net weight approx. 570 kg

Capacity/h: 7000 Pa/h Condition: very good, ready for use Tetra Pak A3 Flex 1000ml Slim, consisting of: Tetra Pak A3 Flex 1000ml Slim, TCAP 45, TCBP 70, conveyor belt system Conveyor 23. To complete the offers, the following additional equipment can be added from our current inventory: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyor belts, closure systems, etc. On request, we can provide comprehensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We would be happy to provide you with a detailed, non-binding offer. Subject to prior sale of all offers.

Filling machine for filling and closing liquids in corresponding bottles. Dosing volume: approx. 50-500 ml. 4-digit machine incl. 6 format parts, infeed turntable, Johnson pump, spare parts etc.

Used aseptic filler made by FBR ELPO, new 1997. Machine comes with steriliser made by CFT Rossi Catelli, new 2000.

Used bottling machine in plastic bags made by Mlecz-Masz, model PAC 50. New 2004.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Make : Trepko Model : Split Cup Capacity : 1000 c/h Stations : Cup Dispenser-Granuals or Cereals Filler- Yoghurt Filler- Aluminium Lid placing - Sealing - Outfeed conveyor-pick and place unit Cup Diameter: 95 mm

Used foil bottler with a capacity of 0.25 - 1 L Unipak, model ASG-3, PLC control, operational, production in the 90s. Technical data: performance -for a bag 1 / 4L 40 / min, 600 L / h -for a bag 1 / 2L 35 / min, 1060 L / h -for a 1L bag 30 / min, 1800 L / h bag sizes -width standard 140 mm, special 110-180 mm -length 60-300 mm electropneumatic control -pressure 0.6-0.8 MPa - demand 20 m3 / h 220V 50 Hz power supply - 1500W power dimensions 880x900x1950 mm -weight 360 kg 2 pieces available.

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

The machine was dismantled at the end of 2021 and has been stored in a hall ever since. The packer is complete with control cabinet and its own compressor. The wiring to the control cabinet was documented during dismantling. Instruction manual on German is also available.

Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...

Linear scale to fill free-flowing, dry products such as coffee beans, tea, grain or animal feed into bags. Conversion to cans, cups or buckets possible. German make. Very good condition. Tested and functional. Pneumatic retaining cylinders With funnel, about 100 liters, made of flexible material and with punchers to avoid bridging in the funnel. Price incl. installation, commissioning, training: € 5,500,-- Subject to prior sale.

1 of used beer bottling line, make Moravek, new 2007. Consists of Moravek BF sterile filtration unit with Parker DH filter housings for 1.00 and 0.45 micron filter elements, bottle loading table, Harlands Proteus full wraparound self adhesive labeller, ink jet coder, Moravek BC15 beer process control unit with inbuilt carbonator processor and filling machine pressure control system coupled to a Moravek 12/12/1 counter-pressure rinser/filler/crowner with double pre-evacuation, Mapex Flo level detector with faulty bottle rejector, Cheops Termopak tray/pad shrinkpacker and inter-connecting conveyors. Moravek 5SA portable menu-fed CIP set, swing bend plate and associated pipework. Line originally ran at 2.300 bph of 500 m (D 75 x H 225 mm, 26 mm crown-corks), packed as 4x2 and 4x3 on tray/pad + shrinkwrap film. Last used for 330 ml LongNeck bottles (D 60 x H 227 mm).

1. TBA/19 - Model 30 V - YOM: 2009 - Capacity 7500 p/h (currently reduced to 4000 p/h) - Package type TWA 200 Slim - running hours: 9000 2. Straw applicator - Model: SA1 - YOM: 2009 - Straw type: U4/180 - Running hours: 18,000 3. Cardboard Packer - Model CBP78 - YOM: 2008 - Packaging Pattern 1x8 Running hours: 1800

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.