pet compressor used for sale

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades., Accessories:, Sawblade holder,, Stepless variable speed control of the sawblade drive,, Pre-selectable timer., Circular saw blade diameter: 1600 mm, Power of geared motor: 0,1 kW, Brush motor performance: 0,75 kW, Connected load approx.: 400 V / 50 Hz, Weight approx: 310 kg, Dimensions W x D x H approx.: 2400 x 850 x 1550 mm, colour: blue/grey

cutting diameter: mm saw band length: mm table height: mm weight of the machine ca.: 3 t dimensions of the machine ca.: m Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the manufact ...

Complete line for filling cans Very good condition! We have used the plant for dry pipe tobacco. It can be used for all free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the system are coordinated by an experienced team and were used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then into cans (both possible), then this is the perfect system for you. The system can be filled into tubular bags as well as directly into cans. The entire plant has a capacity of 30 cans/minute. Some components of the system, such as the capper and the labeller, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs apply). The facil ...

Groove/Perforating Machine Petratto Minibat 2; cleaned and tested; Working width 450mm; Format max.700x450mm, min.200x150mm; Creasing distance 0.1mm; Sniffer; Program memory; Incl. Grooving tool; Rental possible. Creasing and perforating machine Petratto Minibat 2; cleaned and checked; workimg width 450mm; size max.700x450mm, min.200x150mm; Creasing distance 0.1mm; vacuum feeder; program memory; incl. creasing tool; can be rent.

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

General SKU366W1288 LocationBarneveld MakePeter Vossen Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Horizontal tank MaterialStainless steel 1.4552 Horizontal tankcheck Capacity160 l. Sizesdia. 500x1000mm Dished frontscheck Top connectionscheck OutletDia. 50 mm Information No.8340 Year of construction1989 Mounted on legscheck Floorspace1,0x0,50 m Total height0,60 mHorizontal tanksPeter VossenTanks > Horizontal tanksBrand > Peter Vossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This aseptic Krones line from 2015 offers a state-of-the-art solution for the aseptic filling of sensitive, non-carbonated products such as juice, tea and dairy products. With an impressive output of 18,000 bottles per hour with a bottle volume of 1 liter, this complete line ensures maximum efficiency and productivity while maintaining product quality. Thanks to the dry aseptic technology (dry), the line not only guarantees the highest hygienic standards, but also saves valuable resources such as water and cleaning agents, which makes it particularly environmentally friendly. The line is specially designed for use with PET bottles and offers flexibility in processing different types of closures: flat caps (PCO 1810) with a diameter of 38 mm and 28 mm. As part of Krones' portfolio, this line combines state-of-the-art technology with robust, durable processing to ensure reliable, ase ...

This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.

Technical data and specifications This complete production line is suitable for silent and carbonated products. Sterilization with isolator technology STERILJET 2.160-60-113 Ventilation technology isolator aseptic Aseptic rinser with insulator technology VARIOJET 2.880-80-113 Aseptic filler with isolator technology VOLUMETIC VODM-PET 320-120-113 Capper Control unit CHECKMAT 731 FM-X+L Bottle labeling machine CONTIROLL HS 720-15 Control unit CHECKMAT 731 EM Packer VARIOPAC PRO FS Palletizer MODUPAL 1A PCS process control system container transport / conveyor belt SYNCO S container transport / conveyor belt SYNCO S Handle applicator bottle air conveyor AIRCO S MULTICO S package conveyor Pallet conveyor PALCO S Process validation AQUA VARIO DOS CAF-LIQUID ASEPTIC Hygiene Centre Sterile water treatment AQUA ASEPT L 10 m³/h CIP system VARIO CLEAN F AUT-10.000L, 45 m³/h ...

Complete aseptic PET line from Krones for still products – 30,000 bottles per hour / 0.5 l Capacity : 0.5L : Over 30,000 bottles/hour || 1.0L : 25,000 bottles/hour Closure type : 28mm Flat Cap PCO1810 Products : Still beverages such as iced tea and juice Process Type : Wet Aseptic State-of-the-art aseptic beverage production line - built in 2011 - ideal for still products such as iced tea and juices The reliable and powerful Krones aseptic line, built in 2011, is specially designed for the filling of still beverages such as iced tea and juices. With the proven wet-aseptic process, it ensures the highest hygiene standards and optimum product quality. This line is ideal for companies looking for a reliable and flexible solution for the production of premium beverages. Key features Aseptic technology: Ensures maximum product safety through sterile filling processe ...

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

The complete PET filling line is designed for the production of still water and covers the entire process from preform feeding to the palletized end product. The line includes preform feeding, PET bottle blow molding, bottle washing and gravity filling, capping with pre-turned plastic closures, labeling, bottle inspection, conveying, shrink wrapping, palletizing and stretch film wrapping. All machines are integrated to ensure stable operation, high efficiency and consistent performance at a rated speed of up to 43,000 bottles per hour.

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2016 Condition Used Stock number 103813 Production of still water Capacity 54,000 BPH Blowing, Filling & Capping Block KHS INNOPET BLOWFILL MONOBLOCK Roll-fed PE modules labeling machine, labeling stations: 2 Bottle inspection system Bottle inspector KHS Innopack Kisters SP shrink packer KHS palletizing system, double robot arm Pallet wrapping KHS, rotating arm

Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2014 Condition Used Stock number 103814 Production of still water Capacity 54,000 BPH KHS InnoPET BloFill blowing, filling and closing block Blow molding machine KHS Blowmax 24S AF CE46B Compressor System Inspection Systems PRESSCO Series V FHCP3X Labeller Simpl-Cut Flex 1420-45-bl , 2021 Shrink packer KHS Innopack Kisters TSP KHS Innpal PBL 1 N (H) RG 1 palletizing system Lantech SLC-AUTO pallet wrapping, 2015

Fully automated PET still water filling line designed for efficient bottle blowing, filling, capping, labeling, inspection, secondary packaging and palletizing in a synchronized production process. Manufacturer: KHS Model Filling Line Pet 32,000 BPH Year 2009 Condition Used Stock number 103812 Production of still water Capacity 32,000 BPH PET blow molder KHS Blowmax 16S Series IV Filling monoblock KHS, Mechanical filling valves: 50 Labeling Machine PE,Roll Feeding Stations: 1 Bottle inspection system Bottle inspector Palletizer Alvey 881 Lantech pallet wrapper, Model: S1500

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

Manufacturer: Petrol Valves Model: 24inch, 150#

Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313

Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE.

General SKU166B785 MakeJ.S. Petzholdt TypeKM 10 No.10248 Year of construction1976 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor4.36 KW Specified Features - Processing vessel Universal mixercheck Capacity10 l. Vessel sizesø 300 x 230 mm Outletø 50 mm With motor0,66 kW 220 V 3000 rpm With variable speed drivecheck Rotor speed181-392 rpm With lump breakerhomogeniser With motor2,2/3,7 kW 380V 700/1400 rpm Rotor speed0-10000 rpm With jacketcheck Processing vessels MaterialStainless steel 1.4552 General With switchgearcheck Floorspace1,4 x 1,4 m Total height2 m Weight650 kg Extra SpecificationsWith vacuum pump: suction capacity: 10 m³/hProcessing vesselsJ.S. PetzholdtProcessing vessels > Processing vesselsBrand > J.S. Petzholdt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Peter Hirt, Inductive displacement sensor with measurement protocol, original packaging -Type: T501F -Number: 4x measuring probes available -Price: per piece -Cardboard dimensions: 160/120/H30 mm -Weight: 0.2 kg

Centrifuge / centrifuge for deoiling or dewatering Including control cabinet (different speeds), separation basin with 2 pumps, Automatic lid lock (safety lock) Functional

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

Max. size= 120 x 52 cm, Availability= 042026, flat pile feeder creasing station knife perforation 2 parallel folds hotmelt glue unit Delivery with pressing device Feed rollers recoated in 2022 Various accessories for perforation, gluing, and creasing Max size 52 x 120 cm Min size 15 x 20 cm paper stock range Creasing 80 - 500 gr/m2 paper stock range Folding 150 - 500 gr/m2 Speed A4 1 creasing 12.500 cp/h LOT Loaded in truck or container

LEO 1.5 / 2 LGP gasoline water pump - powerful and reliable high-pressure clean water pump., Equipped with a 6.5 HP 4-stroke engine (LEO, optional Honda/BS) and cast iron impeller for extra durability. , Ideal for irrigation, construction, industrial and municipal applications. , , Max suction height 8 m, max head suitable for long distances. , Compact, lightweight and easy to move. , Economical in fuel consumption and equipped with low oil pressure protection. , , Ready for immediate use - perfect for drainage, water transport and emergency dewatering. , Contact us for stock, price and delivery., , Throughput capacity: 20 m3/h, Max. head: 58 MWK, Max dirt passage: 3600 rpm, Weight: 25 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 25 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Ger ...

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

Peter Wolters AC 1000 F Double Sides Fine Grinding Machine The Peter Wolters AC 1000 F is a highly flexible double-sided batch processing machine with pneumatic loading system. Alternatively, the machine can be supplemented with a manual and fully automatic loading system. The swivel functionality enables optimal ergonomic access for the machine operator. Designed for high-precision series production of workpieces Optimum surface quality, flatness, thickness tolerance and plane parallelism with the tightest tolerances on the workpiece Broad portfolio of options to enable complex processes. Phone +49176 21 834 834

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Type: 12/24/1, Year of construction 1997, Rinser - filler with neck-handling - capper (PCO 28 and sports cap), direction: right-left, formats: 500 ml + 1500 ml PET, for 28 mm PCO28. Dimensions: Rinser 1.500 mm x 1.500 mm x 2.750 mm, Füller 2.000 mm x 1.800mm x 2.850 mm, Verschließer 1.000 mm x 800 mm x 2.750 mm. The height is because of the security case around the machine.

A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.

Mould & Matic PET Round Lid Mold, to fit Ø95mm dia. Cups, 10-Cavity, age Dec. 2009, with Stacker Parts. Manufactured for the Gabler D600

PETER WOLTERS AC1200-P Double-sided polishing machine Working hours: 14713 2016 vintage PETER WOLTERS AC 1200F Grinding machine Copper pipe leaking Spare parts for copper pipe Working hours: 2024 2017 vintage PETER WOLTERS AC1200-P Polishing machine Water pressure sensor currently nonfunctional Working hours: 10041 2017 vintage PETER WOLTERS AC 1200F Grinding machine Working hours: 5625 Cooling board currently nonfunctional 2016 vintage (4) units of Peter Wolters AC 1200 systems (2 polishers, 2 grinders), but the seller is coming down on price and I wanted to make you aware of the discount as these are going to be the cheapest AC 1200's we've ever sold. All of the machines are complete and still installed at the seller’s site, but they no longer need these in their process, so they are available for immediate release at a discounted price to facilitate a ...

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

Used Used Presses Preform PET ENGEL 2004: Year: 2004 Condition: As Is Used Presses Preform PET ENGEL: Model: MacPET 4550-320 maszyna nr 52890 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: K 15 More details: https://bottlingscout.com

Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: As Is Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com