135,892 used machines on RESALE, but how to find them? Machine Search
Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg
Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg
Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: As Is Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com
Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: As Is Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com
Used Used PET Blower Uniloy Comec ibm 42: Year: 1990 Condition: As Is Used blower uniloy Comec Year: 1990 Speed: 2200 bph Model: ibm 42 Cavities: 6 Compressor: atlas copco 08 Bottles formats: 3 cl to 500 ml Preform uploader Safety protections Code: W 59 More details: https://bottlingscout.com
Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: As Is Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com
Used Used Kosme PET Blower: Year: 2012 Condition: As Is Model: KSB 4R Year: 2012 Speed: 8,000 BPH Type: rotary Number of cavities: 4 Neck finish: PCO 1881 Included molds for 0.5 L and 2 L formats Chiller included Preform tipper, elevator and orienter included Safety protection Code: W 121 More details: https://bottlingscout.com
Used Used Siapi Pet blower: Year: 2009 Condition: As Is Model: EAS 70 115/8 Year: 2009 Speed: 8000 BPH Suitable for 28mm pco 1810, 28mm pco 1881. Linear 8 molds GENERAL DATA Safety Protections Code: W 120 More details: https://bottlingscout.com
Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 122 More details: https://bottlingscout.com
Used Used Kosme PET Blow Moulding Machine: Year: 2005 Condition: As Is Model: KSB4L Year: 2005 Speed: 6,000 BPH 1L format Type: linear 4 cavities Preform elevator and orientator Bottle neck 29/21 Safety protection Code: W 124 More details: https://bottlingscout.com
Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 123 More details: https://bottlingscout.com
Used Used Sipa Pet Blow Molding Machine: Year: 2009 Condition: As Is Model: SFR 8 Year: 2009 Speed: 12,600 bph with 1.5 L (also 0.75 L and 0.5 L) Type: rotary 8 cavities Molds included (4 different: two 0.5 cl, two 0.75 cl) Chiller included Preform elevator included Bottle neck type: 1881 Safety protection Code: W 125 More details: https://bottlingscout.com
Used Used filler Bertolaso PET bottles 3.500 bph: Year: 1990 Condition: As Is Filler bertolaso Type of bottles: PET Bottles Year: 1990 Speed: 3.500 bph Valves: 32 Direction: counterclockwise Workable bottle type: pet and glass Bottles formats: 1.5 Lt ? 1Lt ? 0.75 Lt Safety protections: yes Bertolaso filler Code: T 155 More details: https://bottlingscout.com
Used Used Skoma pet monoblock 42.10: Year: 2000 Condition: As Is Year: 2000 Speed: 25.000 bph on 0.5l Counterclockwise Gravity filler with 42 valves One capper with 10 heads for: 29/25 flet cap-29/25 sport cap Safety protection Code: QT 756 More details: https://bottlingscout.com
Used Used labeller Sidel PET 36.000 bph: Year: 2007 Condition: As Is EA 638 | LABELLER SIDEL PET 36.000 BPH Year: 2007 Speed: 36.000 bph Direction: Clockwise Model: Alfa Rollquattro Formats: 0.5 LT | 0.75 LT | 1.5 LT 24 heads Nr.1 roll-fed stations Label presence inspection Safety protections Code: EA 638 More details: https://bottlingscout.com
Used Used PET KHS Labeller 15.000 bph: Year: 2002 Condition: As Is Model: ROLAND 10HS Year: 2002 Speed: 15.000 bph Rotary Direction of rotation: Counterclockwise ? from right to left 10 plates 1 hot glue station Types of applicable labels: ? Wraparound label Electronic cam Safety protections Machine layout Code: EA 673 More details: https://bottlingscout.com
Used Used pet Sidel labeller: Year: 2009 Condition: As Is Model: ROLLQUATTRO Year: 2009 Speed: 18.000 bph Rotative clockwise labeller 18 plates, mechanical cam 1 rollfed station for wraparound label OPP Manual connection/coupling Safety protection Code: EA 682 More details: https://bottlingscout.com
800-chamber filter press with motor hydraulics, closed filtrate drain and automatic plate displacement. When the filtrate drain is closed, the filtrate runs through channels within the plate pack to the connections on the fixed stand.
Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades., Accessories:, Sawblade holder,, Stepless variable speed control of the sawblade drive,, Pre-selectable timer., Circular saw blade diameter: 1600 mm, Power of geared motor: 0,1 kW, Brush motor performance: 0,75 kW, Connected load approx.: 400 V / 50 Hz, Weight approx: 310 kg, Dimensions W x D x H approx.: 2400 x 850 x 1550 mm, colour: blue/grey
cutting diameter: mm saw band length: mm table height: mm weight of the machine ca.: 3 t dimensions of the machine ca.: m Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Groove/Perforating Machine Petratto Minibat 2; cleaned and tested; Working width 450mm; Format max.700x450mm, min.200x150mm; Creasing distance 0.1mm; Sniffer; Program memory; Incl. Grooving tool; Rental possible. Creasing and perforating machine Petratto Minibat 2; cleaned and checked; workimg width 450mm; size max.700x450mm, min.200x150mm; Creasing distance 0.1mm; vacuum feeder; program memory; incl. creasing tool; can be rent.
Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - .ucymachines/ Contact us at - sales@ucymachines
Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper
Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...
General SKU366W1288 MakePeter Vossen LocationBarneveld Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Horizontal tank Horizontal tankcheck Capacity160 l. Sizesdia. 500x1000mm Dished frontscheck Top connectionscheck OutletDia. 50 mm MaterialStainless steel 1.4552 General No.8340 Year of construction1989 Mounted on legscheck Floorspace1,0x0,50 m Total height0,60 mGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicPaints & coatingsOils & fatHorizontal tanksPeter VossenIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemi ...
This aseptic Krones line from 2015 offers a state-of-the-art solution for the aseptic filling of sensitive, non-carbonated products such as juice, tea and dairy products. With an impressive output of 18,000 bottles per hour with a bottle volume of 1 liter, this complete line ensures maximum efficiency and productivity while maintaining product quality. Thanks to the dry aseptic technology (dry), the line not only guarantees the highest hygienic standards, but also saves valuable resources such as water and cleaning agents, which makes it particularly environmentally friendly. The line is specially designed for use with PET bottles and offers flexibility in processing different types of closures: flat caps (PCO 1810) with a diameter of 38 mm and 28 mm. As part of Krones' portfolio, this line combines state-of-the-art technology with robust, durable processing to ensure reliable, ase ...
This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.
Technical data and specifications This complete production line is suitable for silent and carbonated products. Sterilization with isolator technology STERILJET 2.160-60-113 Ventilation technology isolator aseptic Aseptic rinser with insulator technology VARIOJET 2.880-80-113 Aseptic filler with isolator technology VOLUMETIC VODM-PET 320-120-113 Capper Control unit CHECKMAT 731 FM-X+L Bottle labeling machine CONTIROLL HS 720-15 Control unit CHECKMAT 731 EM Packer VARIOPAC PRO FS Palletizer MODUPAL 1A PCS process control system container transport / conveyor belt SYNCO S container transport / conveyor belt SYNCO S Handle applicator bottle air conveyor AIRCO S MULTICO S package conveyor Pallet conveyor PALCO S Process validation AQUA VARIO DOS CAF-LIQUID ASEPTIC Hygiene Centre Sterile water treatment AQUA ASEPT L 10 m³/h CIP system VARIO CLEAN F AUT-10.000L, 45 m³/h ...
Complete aseptic PET line from Krones for still products – 30,000 bottles per hour / 0.5 l Capacity : 0.5L : Over 30,000 bottles/hour || 1.0L : 25,000 bottles/hour Closure type : 28mm Flat Cap PCO1810 Products : Still beverages such as iced tea and juice Process Type : Wet Aseptic State-of-the-art aseptic beverage production line - built in 2011 - ideal for still products such as iced tea and juices The reliable and powerful Krones aseptic line, built in 2011, is specially designed for the filling of still beverages such as iced tea and juices. With the proven wet-aseptic process, it ensures the highest hygiene standards and optimum product quality. This line is ideal for companies looking for a reliable and flexible solution for the production of premium beverages. Key features Aseptic technology: Ensures maximum product safety through sterile filling processe ...
Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...
The complete PET filling line is designed for the production of still water and covers the entire process from preform feeding to the palletized end product. The line includes preform feeding, PET bottle blow molding, bottle washing and gravity filling, capping with pre-turned plastic closures, labeling, bottle inspection, conveying, shrink wrapping, palletizing and stretch film wrapping. All machines are integrated to ensure stable operation, high efficiency and consistent performance at a rated speed of up to 43,000 bottles per hour.
Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.
Fully automatic and integrated PET still water filling line, designed to perform preform handling, bottle blowing, filling, capping, labeling, inspection, secondary packaging, palletizing and pallet stretch wrapping in a synchronized production process.
Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2016 Condition Used Stock number 103813 Production of still water Capacity 54,000 BPH Blowing, Filling & Capping Block KHS INNOPET BLOWFILL MONOBLOCK Roll-fed PE modules labeling machine, labeling stations: 2 Bottle inspection system Bottle inspector KHS Innopack Kisters SP shrink packer KHS palletizing system, double robot arm Pallet wrapping KHS, rotating arm
High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany
Fully automated PET still water filling line designed for efficient bottle blowing, filling, capping, labeling, inspection, secondary packaging and palletizing in a synchronized production process. Manufacturer: KHS Model Filling Line Pet 32,000 BPH Year 2009 Condition Used Stock number 103812 Production of still water Capacity 32,000 BPH PET blow molder KHS Blowmax 16S Series IV Filling monoblock KHS, Mechanical filling valves: 50 Labeling Machine PE,Roll Feeding Stations: 1 Bottle inspection system Bottle inspector Palletizer Alvey 881 Lantech pallet wrapper, Model: S1500
Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2014 Condition Used Stock number 103814 Production of still water Capacity 54,000 BPH KHS InnoPET BloFill blowing, filling and closing block Blow molding machine KHS Blowmax 24S AF CE46B Compressor System Inspection Systems PRESSCO Series V FHCP3X Labeller Simpl-Cut Flex 1420-45-bl , 2021 Shrink packer KHS Innopack Kisters TSP KHS Innpal PBL 1 N (H) RG 1 palletizing system Lantech SLC-AUTO pallet wrapping, 2015
Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985
maximum number of results exceeded
please refine your search
