pet bottles used for sale

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

For wine and sparkling wine bottles Type: WD/ 12 capacity / hour ca.: 6000

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robust ...

Technical Specifications & Performance Data The KHS Innofill-ER VF 143/20 is a high-speed used isobaric filling monoblock designed for premium glass bottle applications in beverage production. Engineered for reliability in industrial packaging environments, it offers consistent performance for soft drinks, sparkling water, and still water on a used bottling line. Manufacturer: KHS Model: Innofill-ER VF 143/20 Category: Filling Monoblock (Isobaric) Year of manufacture: 1994 Rated speed: up to 45,000 bottles per hour (format- and product-dependent) Filler configuration: 143 isobaric filling valves (rotary) Capper: 20-head Alcoa ROPP, 20 mm (rotary) Container types: Glass bottles Bottle formats: 0.70 L, 0.75 L Product types: Soft drinks, water (sparkling), water (still) Electrical: 50 Hz Condition: In storage Documentation & safety: Manuals available; safety features included Advanced Autom ...

Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsin ...

Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...

Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  D ...

Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) ...

Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nom ...

Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  Output: 2,000 bottles/hour Different bottle shapes possible as the height and width can be adjusted Bottle volumes from 0,5l to 3,0l are possible Last used for: Spirits, can also be used for other liquids Scope of delivery  Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) Borelli Capper for T-cork C ...

Left to Right uwemetzlerdingslebener.de 03687328415

consisting of:  - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...

Consisting of 20x Sanisure 5ltr Pharmatainer assembly and 5x Sanisure 20ltr mixed4sure bottle, including 1x Corning disposable spinner flask, on and including 2x pallet. Auction-ID: A1-48959-727

EXPIRES APRIL 2022 Auction-ID: A1-50069-244

EXPIRES APRIL 2022 Auction-ID: A1-50069-259

EXPIRES APRIL 2022 Auction-ID: A1-50069-258

EXPIRES APRIL 2022 Auction-ID: A1-50069-261

EXPIRES APRIL 2022 Auction-ID: A1-50069-260

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 2 ...

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

FISH FOOD / PET FOOD EXTRUSION LINE CAN HAVE MANY APLLICATIONS FROM PET FOOD TO FISH FOOD was used to produce dog food output till 2 / 3 tonnes according to formulas Extruder was well maintained MODEL BC 82, TWIN SCEWS, has rails allowing to open totally the extruder to clean screw and barrels Extruder main electric cabinet coming with the line Conditionner Wenger , stainless, model 7 DCC , new in 2000 used for 2 years extruder main electric engine new in 2000, Continuous current LAK 4180 DA 400 volts, used for 2 years pelleting device, sieve, scale, buffer bin, STOLZ coater, STG 500 with vacum pomp the cooler (STOLZ RCC SEP 22X22F ) is not any included in the line many accessories, pomps, valves are coming with the line The line is partialy diassembled, plans could be provided Visits can be planned, enquiries for further details are welcome

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg