pet bottle filling used for sale

Vibrating bottle 58 mm, w. converter

Double bottle trolley steel, solid rubber tires

Manufacturer: RINK Machine type: Capsule Roller Year of manufacture: 09/2022 Electrical Specifications - Rated voltage: 230/400 V - Network type: TNS - Mains frequency: 50 Hz - Full load current: 4.5 A - Short circuit resistance: 10 kA - Isolating device: 10 kA - Pre-fuse: 3x6 A Protection - Enclosure protection rating: IP 55 Find more here - / Contact us at -

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | -

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Dry spices BBD 2022 3 bottles Bullin LP liquid each 1.5 kg, approx. 8x 1 kg div. spices, BBD 2025

Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...

Bottle shakers without designation, total quantity approx. 4 pcs., details n. can be viewed

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

Single-end bottle washer. Factory overhauled in 2005., Additional title: one end machine, Nominal capacity: 6700 bo/h, Control range: 7370 bo/h, Number of bottle cells: 1620 pcs., Number of bottle cells per row: 10 pcs., Length: 7790 mm, Width: 3450 mm, Height: 2950 mm, Weight: 20000 kg, Machine partitioning: Chain division 150 mm, cell division 110 mm, Operation / Control: Siemens S 5, Material: Stainless steel, Position: Free-standing on spherical feet, Base construction: Housing in one-piece block design, Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

Krones Prontomatic labelling machine, type 12-6/6-4, For labelling crown-capped bottles in 0.5-litre and 0.33-litre sizes, as well as swing-top bottles in 0.5-litre and 0.58-litre sizes. Disposable crown-capped bottles in 0.33-litre sizes can also be labelled., Capacity: 13500 bph Swing-top label, Voltage: 400 V, Frequency: 50 Hz, Length: 2450 mm, Width: 2000 mm, Height: 2500 mm, Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l, Machine partitioning: 180mm, Running direction: Right - left, Operation / Control: Simatic S7-300

This bottle crusher from HEIN Lärmschutztechnik GmbH efficiently crushes bottles by pressing and offers high crushing performance and significant volume reduction. Its compact and robust design ensures low wear, quiet operation (85/87 dB(Ai)), and splinter protection, making it ideal for busy production environments. The system has a manual capacity of 2,400 bottles per hour and operates at 380 V / 50 Hz, 6.5 A. It stands on ball feet and has a fragment container and a noise protection box, while its compact dimensions (1.45 m × 1.20 m × 1.85 m) mean it requires little space. The machine weighs 900 kg and offers stability and durability in daily operation. At a glance: Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Our team at VB ...

Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner., Additional title: PET bottle ejection system, Capacity: 4000 crates/h, Power: 2,8 kW, Current: 8 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, 1 m³/h, Length: 3000 mm, Width: 1910 mm, Height: 3830 mm, Weight: 2500 kg, Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l, Operation / Control: Simatic S7-300, Material: stainless steel, Position: free standing, Base construction: Stainless steel square tube construction on spherical feet, Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  Capacity: Up to 150 bottles/min Operation: Continuous from bulk hopper feed Bottle types: Plastic (PET, HDPE, etc.) Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) Bottle orientation: Bottom-first via pneumatic flipping device Machine direction: Left  ...

Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robust ...

Steinie swing-top bottle 33 cl Plastic bracket with red, glued seal Quantity: approx. 40,000 bottles can also be supplied without bracket

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Single-end machine for cleaning glass bottles., Additional title: Bottle washing machine, Capacity: 3000 bottles/h, Length: 4,43 m, Width: 2,60 m, Height: 2,52 m, Base construction: Single-end machine, Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Additional title: crate packer, Capacity for plastic crates: 500 cycles/h , Power: 11 kW active power/ 15 kVA apparent power, Voltage: 230/400 V ± 5 %, Frequency: 50 Hz ± 2 %, Length: 4170 mm, Width: 2550 mm, Height: 2650 mm, Weight: 4300 kg, Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm, Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

Inspection system for detecting damaged and soiled bottles., Additional title: Residual liquid, bottom, mouth, sidewall control, Capacity: 32000 bottles/h, Power: 3,6 kW, Voltage: 400 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 2,5 m, Width: 1 m, Height: 2,5 m, Weight: 1700 kg, Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles, Running direction: right-left, Operation / Control: Heuft, Features: residual liquid, bottom, body, mouth, side wall

Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph, Additional title: Single-ended machine, Capacity: 21000 bo/h, Bottles each row: 16 bo/row, Length: 8,64 m, Width: 4,47 m, Height: 1,92 m, Weight: 17900 kg, Formats: 0,5 l NRW-Bottle, Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank , Periphery: S5 controll (HMI Lauer)

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry., Additional title: Linear set packer, Capacity: 600 crates/h 10 strokes/min., Power: 5,5 kW, Current: 10 A, Voltage: 400 V, Frequency: 50 Hz, Length: 3000 mm, Width: 1540 mm, Height: 2600 mm, Weight: 1100 kg, Formats: 24 x 0,33 L Vichy, Running direction: Right-left, Operation / Control: Simatic S7-99, Base construction: Frame, height-adjustable, Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima)

Used Labeler Cavagnino & Gatti CG-84-FR 3-8 3000 bph Year 2001 For flasks of 150 mm in diameter These Cavagnino & Gatti rotary wet glue labelers are capable of production speeds from 4,000 to 9,000 bottles per hour with applications throughout the wine, beverage, food, chemical and household industries. The CG84CR-DR-FR series of machines are the result of an innovative design that has allowed for a reduction of components of the labeling unit which has resulted in important advantages in terms of economy, ease-of-use, changeover time and maintenance. This series of C&G machines are available with either the standard bottle platform motion by double profile cam in an oil bath or by programmable servo-platforms MP. These labelers can be equipped with various optical and/or mechanical spotting systems for the automatic alignment of printed capsules, glass cartouches, side and bottom notchl ...

Technical Specifications & Performance Data The FINPAC SHM B2 is a second hand sleeve labeling solution engineered for high-output beverage production and industrial packaging environments. Optimized for PET bottles, it delivers stable application of shrink sleeves and consistent shrink quality via an electric tunnel, making it a strong fit for a used bottling line seeking reliable, repeatable labeling performance. Manufacturer / Model: FINPAC SHM B2 Year: 2007 Category: Labeling Machine (sleeve applicator with electric shrink tunnel) Nominal speed: up to 9,000 bottles/hour Container types: PET (primary configuration) Bottle formats set up: 0.06 L and 0.50 L Typical bottle range: diameter 55–87 mm; height 120–240 mm Sleeve film thickness: 45–50 µm Number of stations: 1 Labeling method: Sleeve application (method code 8) Label placement: Full-body sleeve capability (placement code  ...

Technical Specifications & Performance Data The SACMI OPERA RA 720 8T S3 is a rotary labeling machine engineered for consistent, high-quality application on glass bottles within demanding beverage production environments. As a second hand solution from a leading manufacturer, it offers reliable performance and ease of integration into a used bottling line. Manufacturer / Model: Sacmi OPERA RA 720 8T S3 Year: 2005 Category: Labeling Machine (rotary) Operational condition: READY FOR OPERATION Production speed: up to 6,000 bottles/hour Container types: Glass Bottle formats: 0.06 L and 0.75 L Number of plates: 8-position rotary carousel Number of labeling stations: 3 (multi-label capability) Label positions: Supports body/front, back, and neck applications Optical centering system: Integrated high-precision sensor-based centering Head adjustment: Fine-adjustable labeling heads for precise al ...

Technical Specifications & Performance Data Used Bottle Labeler Krones VARIOMATIC 7000 bph suitable for integration in a used bottling line for beverage production and other industrial packaging applications. This second hand rotary labeler combines cold-glue and self-adhesive technologies to cover a wide range of products and label materials. Manufacturer / Model: Krones VARIOMATIC Year of manufacture: 1998 Nominal speed: up to 7,000 bottles per hour (bph) Container type: Glass bottles Bottle format: 0.75 L (typical wine and sparkling formats) Labeling technologies: 4 stations total – 3 cold-glue stations + 1 self-adhesive (PSL) station No. of plates / bottle platforms: 4 Label materials: Paper (cold glue) and pressure-sensitive labels Optical centering system: Not included (mechanical centering per OEM configuration) Electrical: 220 V, 20 A, three-phase Condition: In storage Document ...

Technical Specifications & Performance Data The Eticap AR 4T 2S is a rotary pressure‑sensitive labeling machine designed for precise application on glass bottles within a used bottling line. This second hand unit offers reliable performance for beverage production environments seeking consistent label placement at moderate speeds. Manufacturer / Model: Eticap AR 4T 2S (4 labeling heads) Year of manufacture: 1997 Production speed: up to 2,500 bph (bottles per hour) Container types: Glass bottles (optimized for cylindrical and slightly conical formats) Bottle formats handled: 0.06 L and 0.75 L Labeling technology: Pressure‑sensitive (self‑adhesive) Number of labeling stations: 2 Rotary plates: 4 cam‑driven plates with mechanical orientation (Maltese‑cross/Geneva mechanism) Rotation direction: Clockwise Head adjustment: Manual fine adjustment for label heads Optical centering: Mec ...

Technical Specifications & Performance Data The Kosme Kosmac 6r1s3s ADH is a rotary self-adhesive labeler with additional glue application for seal/tax band, designed for dependable operation in beverage production environments. Ideal for integration into a used bottling line, it offers consistent labeling quality for glass bottles in still and sparkling applications. Manufacturer / Model: Kosme – Kosmac 6r1s3s ADH Year of manufacture: 2000 Production speed: up to 3,000 bottles per hour (format-dependent) Container types: Glass (configured) Bottle formats: 0.375 L and 0.75 L Labeling configuration: 3 self-adhesive groups (front/back/neck) + glue station for state/tax seal Number of stations: 4 total Number of plates: 6-plate rotary carousel Rotation direction: Clockwise Electrical supply: 380 V, 50 Hz, 3.5 kW, 3-phase Approximate weight: 2,000 kg Advanced Automation & Control Systems T ...

Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the pla ...

Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automat ...

Used Bottle Washer Bodini up to 3000 bph Introduction to the Used bottle washer Bodini up to 3000 bph Efficiency in bottling is a pivotal aspect for the beverage industry. The used Bondini bottle washer, model Nexus, stands out as an ideal solution for those seeking high performance. Impressively, it guarantees processing up to 3000 bottles per hour (BPH). Constructed in 1996, this machine expertly combines advanced technology with robustness, offering a dependable cleaning solution for glass containers. Thus, it represents a significant advantage for operations requiring high throughput. Technology and Performance Moreover, the Nexus by Bodini is equipped with six washing rows, enabling the treatment of various bottle formats, ranging from 0.375 L to 2 L. This versatility leads to greater efficiency in handling different sizes. Additionally, its internal/external cleaning system, which  ...

Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsin ...

Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for ...

Used Bottle Washer BARDI 6200 bph Used Bottle Washer Bardi 6200 bph: Technical Specifications and Operational Advantages The used bottle washer Bardi 6200 bph, model NILO 2 P 145-174-168, performs bottle washing especially for 1.5 L containers. It processes up to 6,200 bottles per hour. The machine features 22 loading lanes and a single bottle entry. The machine can wash bottles with a diameter of up to 131 mm, which makes this model particularly suitable for the fiasco” bottle format. At the same time, it remains highly adaptable to other containers with similar dimensions. Thanks to adjustable transport components, users can switch bottle formats quickly without needing structural modifications. Mechanical Structure and the Pulp” System for Label Removal Bardi builds the entire structure from stainless steel, which resists the aggressive chemical agents used during washing cycles.  ...

Used Bottle Washer Dryer Cames WDT8 Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel,  ...