pet blowing used for sale

Used Used labeller Sidel PET 36.000 bph: Year: 2007 Condition: Good EA 638 | LABELLER SIDEL PET 36.000 BPH Year: 2007 Speed: 36.000 bph Direction: Clockwise Model: Alfa Rollquattro Formats: 0.5 LT | 0.75 LT | 1.5 LT 24 heads Nr.1 roll-fed stations Label presence inspection Safety protections Code: EA 638 More details: https://bottlingscout.com

Used Used PET KHS Labeller 15.000 bph: Year: 2002 Condition: As Is Model: ROLAND 10HS Year: 2002 Speed: 15.000 bph Rotary Direction of rotation: Counterclockwise ? from right to left 10 plates 1 hot glue station Types of applicable labels: ? Wraparound label Electronic cam Safety protections Machine layout Code: EA 673 More details: https://bottlingscout.com

Used Used 2019 Complete PET Line KHS 70.000 bph: Year: 2019 Condition: Good Product: Still water Speed: 70.000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock Blower PET Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Modello: nopack Kisters TSP Versione: a lancio di film Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692 More details: https://bottlingscout.com

Used Used Complete PET Bottling Line Sidel Soft Drinks 13.500 bph: Year: 2010 Condition: Good Used Complete PET Bottling Line: Product: carbonated water and drinks Speed: 13.500 BPH PET Preform Presses Sameto Model: EBH 2050 Year: 2010 PET Blower Sidel Model: SBO10 Size of neck: fi28 1881 Number of molds: 10 Air conveyor Alsim Year: 1999 Monoblock Alsim Model: Asmojet 1T RV-P 48/60/10K Rinser 48 clamps 1 treatment with water Filler 60 valves Filling type: isobaric Capper 10 heads Mixer Alsim Hourly output: 30 pph Bottle dryer ACI Year of construction: 2015 Labeler Krones Contiroll Model: Contiroll Year of construction: 2004 Labeler type: rotary Number of plates: 15 Pet wrap around label Labeling station type: roll-fed Shrink Wrapper Acmi Model: SHRINK-WRAPPER Fenix Year: 2019 Version: film launching Type: film only Handle Applicator Smipack Model: HA 35-50-70 Year: 2002 Palletizer Alsim  ...

Used Used Complete PET Krones line 30.000 bph: Year: 2004 Condition: Good Used Complete PET Krones line 30.000 bph: Product: Still water (with neck modification can also make sparkling) Speed: 30.000 BPH with bottles of 0.5 lt 30.000 BPH with bottles of 1.5 lt 22.000 BPH with bottles of 2 lt Working hours: 56.000 Preform tipper M. Tanner AG: Model: VZT -4010 Year: 2004 Preform Washing System Krones: High pressure compressor Ateliers Francois: Model: 20G282 Pressure: 40 BAR Blower PET Krones: Model: Contiform 20 Number of cavities: 20 Molds not included Complete with feeder and preform orientator Cap Elevator and Orientator Gassner: Type of caps supported: Plastic pre-threaded cap type: mechanical Type of caps supported: cap sport Cip Steinecker: Model: Media Station UV WEDEDCO: Water treatment using UV rays Monoblock KRONES (composed of filler and capper): Model: Isofill Direction: Count ...

Used Used Sidel Complete PET Bottling Line 28.000 bph: Year: 2005 Condition: Good Used Sidel Complete PET Bottling Line 28.000 bph: Product: CSD and Water Speed: 28.000 BPH Feeder preform Lanfranchi Year 2023 COMBI SIDEL Year: 2005 Directions: counterclockwise Composed of : blowmoulding PET SIDEL Model: SBO 20 Cavities: 20 Moulds NOT INCLUDED Preform elevator/orientator included Chiller not included Filler SIDEL Valves: 140 Isobaric filing Filling by mechanical ? volumetric Degassing Capper AROL Closing Heads: 15 Pick & place distributions Nitrogen Nitrodose System Year: 2017 Mixer Sidel Modello MAS ? MIX Vacum pump missing CIP Sidel Model: CIP AUTOMATICO Elevator/Tilter AROL Model: ELEV PNEU Bottles dryer SIPAC Labeller Krones: Model: Contiroll 960-24-2 Year: 2002 Directions: Counterclockwise (parallel inlet/poutput) Electri adjustment height Number of plates: 24 Mechanical cams by belt ...

Used Used PET Bottling Line BC 8.000 bph: Year: 2004 Condition: Good Used PET Bottling Line BC 8.000 bph: Product: still water Speed: 8,000 BPH Blow molding machine PET SIAPI Model: EAS70.115.9 Year: 2003 Linear 9 cavities Chiller Eurochiller Model: GCA 035 Year: 2015 Rinser WAB: Model: Advance RP 1R 32/113 T Year: 2002 Clockwise 32 Clamps Electric carousel height adjustment with button from the operator panel Fixed nozzle Double treatment Filler BC: Model: Master RS 32/32/8 Year: 2004 32 mechanical valves Type of filling: isobaric Electric tank height adjustment with button from the operator panel Capper AROL: Model: Euro PK 8 heads Electric manual head height adjustment with button from the operator panel Type of workable cap: pre-threaded plastic caps (three principles/corvaglia) Cap measurements: ? 30 mm; Height: 15 mm Distribution system: pick & place Caps elevator MARMO: Model: ALP ...

Used Used Kosme Complete PET Bottling Line: Year: 2018 Condition: Good Speed: 5.300 bph ? 500 ml PET Kosme Preform Hopper ? year 2018 Kosme Preform Elevator ? year 2018 Kosme Preform Disorderer ? year 2018 Kosme Blow Molding Machine ? year 2018 ATS Chiller Air Conveyor Mixer for Caramelizing Techniques ? year 2016 Kosme Filler ? year 2017 AVE Capper ? year 1999 Kosme Labeler ? year 2018 Mixed Conveyors Shrink Machine SMI ? year 2001 SMI Thermal Tunnel Suitable for packs 6 / 12 / 24 Videojet Date Coder Logopak Box Labeler 2012 Code: NP 668 More details: https://bottlingscout.com

Used Used PET Bottling Line Krones 30.000 bph: Year: 2006 Condition: Good COMPLETE BOTTLING LINE KRONES 30.000 bph Product: still water Speed: 30.000 bph ? 1.5 lt PET Preform tipper ? 2018 Model: m.tanner ag/prologic Caps elevator Gassner ? 2006 Manufacturer: gassner Preform aligner (part of the blow molding machine) ? 2006 Monobloc with blow moulder, filler and capping machine Blow molding machine ? 2006 Brand: Krones Model: krones contiform s20 Type: Rotating number of stamp: 20 Filler ? 2006 Model: krones volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper: (it is part of the monoblock) ? 2006 Number of heads: 18 Type of cap: alaska 3 Principles Distribution system: pick & place Nitrogen dispenser ? 2006 Model: cryotech international Inspector for level control and cap ? 2006 Model: krones checkmat Bottle transport ? 2006 ...

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Peter Hirt, Inductive displacement sensor with measurement protocol, original packaging -Type: T501F -Number: 4x measuring probes available -Price: per piece -Cardboard dimensions: 160/120/H30 mm -Weight: 0.2 kg

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsB ...

Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

for the production of 27,000 bottles per hour. With shape

for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Key data: 90 , 40 , 510

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available

Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany

GENERAL DESCRIPTION: The Macchi 3-Layers E18 is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands. It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP. The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers •Engine: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control  ...

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

Blowing machine Sidel Type: Universel SBO 14 with 14 cavities Year of manufacturring: 2007 Output: 30.000 bph Formats: 0,5 ltr. (12 g) and 1,5 ltr. (25 g) Neck size: Alaska PCO 1881 Preforms in the machine: 242 including air recovery including Lanfranchi preform tilting device, built in 2007 including preform hopper including preform feeding system including Aski Model LCA-E cooler, built in 2013

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

Blowing and Sterilization station MCF Trade Model 2 Never used. This machine allows the washing of glass containers of various sizes, by means of a jet of air and steam. Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers, also prepared for steam injection to sanitize and heat the containers. The blowing station is a machine designed for washing glass containers of various sizes (see photo). The machine essentially consists of a linear conveyor belt that places the containers on a single row. These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed. Once the containers are overturned; they descend onto nozzles with adjustable distance and height in order to better center and clean the containers. At the end of the operation, the containers re ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!

with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...

PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense