pet blowing moulding used for sale

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw

Type of control: NC 4 Closing force: 250 T Opening stroke: 675 mm Between columns: 630 x 630 mm Tray dimensions: 950 X 950 mm Mini/maxi mould: 330/710mm Max gap between trays: 1385 mm Screw diameter: 60mm Screw length: 20D

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

Closing force: 280 T Opening stroke: 675 mm Between columns: 630 X 630 mm Tray dimensions: 950 x 950 mm Mini/maxi mould: 330/710 mm Max gap between trays: 1385 mm Motor power: 26 kW Heating power: 23.1 kw Type of control: NC 4

Used Krauss Maffei 150-700 C1 Injection moulding machine From 1998 Without robot Machines is functional and in production, can be seen anytime by appointment. PDF attached.

Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached

Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D

Brand: Battenfeld Injection molding machine working Production until October 2021

3 BMB KW38 machines for sale 2 of them in good condition the other for parts

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ CLOSING UNIT Closing force: 1100 kN Passage between columns: 470 x 470 mm

Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes

1993 model husky xl 300 pet injection engine (full revision) 1997 model Piovan raw material dryer 1999 model Fasti mold drier Robot and conveyor Some pet preform moulds ( New ) Full automatic, in excellent condition

Sandretto Series 350 Injection molding machine Ask for technical details.

Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

LS Machinery LGH 850 M-GC Injection moulding machine LS Machinery LGH 850 M-GC

LS Machinery LGH 1050 M-GC Injection moulding machine LS Machinery LGH 1050 M-GC

LS Machinery LGH 850 M-GC Injection moulding machine LS Machinery LGH 850 M-GC

Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg

LS Machinery ID1300HM Injection moulding machine LS Machinery ID1300HM

Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499

Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

Negri Bossi NB 250 Injection Moulding Machine power output: 79kw Dimensions: 620014002000 weight: 10,560 kg screw size: 60 mm column spaces: 460460 mm plate dimensions: 860860 mm

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Closing unit Closing force: 1400 kN Other Equipment : Commissioned: 1999 Number of hours: 46868 h Tonnage: 140

The machine is fully equipped with equipment, i.e.: a plastic hauler and a plastic mill/cascade crusher. Year: 2015

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

MACHINE IN GOOD CONDITION NEGRI BOSSI CANBIO Injection moulding machine

This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.

This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.

This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).

This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.