pet blow used for sale

Huber Unichillers offer better efficiency, stable pressure, and consistent flow with a higher cooling water temperature than tap water systems Auction-ID: A1-49883-34

Huber Unichillers offer increased efficiency, stable pressure, and consistent flow, with a permanent cooling water temperature, compared to traditional tap water cooling systems Auction-ID: A1-49883-207

2 Pieces Pet Beach Basket Usedum S The equipment includes, as shown in the figure: 1 swivel stainless steel bowl 1 padded lying surface 1 cover set in the shown décor for seat, backrest, side panels and awning / sun protection for self-assembly incl. assembly instructions Can be used indoors and outdoors Product details PE (polyethylene) braid All fittings galvanised 1 swivel bowl Body juniper wood Cover 100% polyester, water-repellent Assembly material & assembly instructions Dimensions and weight Size: S Width: 65cm (60 cm incl. carrying handles) Height: 80cm Depth: 50cm Seat height: 9cm Seat: 45 x 55cm Weight: 12kg Auction-ID: A1-49989-35

The Huber recirculating chiller offers a cost-effective alternative to tap water cooling. By reducing water consumption, they are environmentally friendly. They also result in better yields, a stable flow rate and circulation pressure and, above all, a constant cooling temperature. Auction-ID: A1-49883-82

Toro HoverPro hover mower – Honda GCV160 – approx. 53 cm Specifications: Brand: Toro Series: HoverPro Version: hover mower / air cushion mower Cutting width: approx. 53 cm Engine: Honda GCV160 OHC Engine type: 1-cylinder, air-cooled 4-stroke petrol engine Displacement: 160 cc Start: manual pull starter Cutting system: rotating steel blade Cutting height: adjustable Cutting deck: plastic / polymer Drive: directly on mowing blade Control: manual guided Own weight: indicative approx. 19 kg Features: Air cushion/float system Honda GCV160 petrol engine Steel mowing blade Height-adjustable handle Safety control on handle Compact and manoeuvrable design Suitable for working on slopes and embankments Particularities: The machine was put away in working order as stated, but then not tested again. Current operation is therefore unknown. Auction-ID: A1-47389 ...

2x Hager HG1200 petrol generators – unused stock goods Technical data per device: ✓ Manufacturer: Hager ✓ Model: HG1200 ✓ Year of construction: 2023 ✓ Gasoline generator ✓ Voltage: 230 V ✓ Continuous power: 700 W ✓ Mobile and compact design Condition: ✓ Unused stock goods ✓ Several identical devices available ✓ You will receive 2 identical devices from our stock ✓ Photos serve as sample/reference images ✓ Serial numbers may vary ✓ Minimal bearing-related traces or deviations possible Scope of delivery: ✓ 2x Hager HG1200 power generator ✓ 2x user manual ✓ Tools and accessories according to illustrations Note: ✓ The Hager HG1200 is also offered individually in a separate auction . Auction-ID: A1-49581-80862

The Huber recirculating chiller offers a cost-effective alternative to tap water cooling. By reducing water consumption, they are environmentally friendly. They also result in better yields, a stable flow rate and circulation pressure and, above all, a constant cooling temperature. Auction-ID: A1-49883-102

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-50091-1201

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-50091-1200

Unused; 270cc; tracks 180mm; speed 0.5km/h; Transmission manual 3F-1R; 9HP; inside box 1040x620x320mm; outside of the box 1100x680x620mm; 6525 Auction-ID: A1-50091-80

Drilling length 1000mm; drill diameter 200mm; tank capacity 1050ml; engine speed 8500rpm; 2 stroke; 52cc; 6170 Auction-ID: A1-50091-118

Unused; in a box; manual; Engine: 2-stroke; Displacement: 65 cc; Rated power speed: 12000 rpm; Fuel tank volume: 550 ml; Oil tank volume: 260 ml; Bar length: 60 cm; Chain pitch: 0.325\"P; Oil gasoline mix ratio: 01:40 ; 4891 Auction-ID: A1-50091-103

Drilling length 1000mm; drill diameter 200mm; tank capacity 1050ml; engine speed 8500rpm; 2 stroke; 52cc; 6170 Auction-ID: A1-50091-117

General information Condition: Unused (kit) Fuel: Petrol Engine Displacement: 452 cc Engine type: OHV Number of cylinders: 1 (with cast iron cylinder liner) Starting system: Electric Fuel tank: 7.5 litres Transmission Type: Hydrostatic Max. forward speed: 8 – 10 km/h Max. reverse speed: 4 – 6 km/h Chassis Front tires: 15 × 6.00-6 Rear tires: 18 × 8.50-8 Turning radius: 55 cm Cutting deck Cutting width: 98 cm Max. working area: 5000 m² Material: Steel Collector: 250 litres Cutting height: 30 – 90 mm Number of cutting height positions: 7 Blades: Twin blades Auction-ID: A1-50091-92

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-50091-108

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-50091-110

GE Healthcare Odyssey Q-Core PET MFG 5482331 ODQ075 with HP Z820 Workstation Auction-ID: A1-49756-182

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-50091-105

Auction-ID: A1-49615-12

Practical Citroën Berlingo, first registration 13/02/2012, equipped with 1.6 petrol engine and manual gearbox. With five seats, sliding doors and spacious luggage space, this is a versatile car for both private and professional use - Vehicle condition The vehicle is in used condition with clear signs of wear and age. The black bodywork shows scattered scratches, abrasion marks, stone chips and local paint damage. Traces of wear are particularly visible on the front bumper, sides, sill/door area and rear bumper. Important: in various places, including at the door openings, around the sliding door and at the level of damage in the black paint, a yellow underlying or earlier layer of paint is clearly visible - The interior still looks quite complete, taking into account age and mileage. The fabric seats are present and show normal signs of wear. The luggage compartment and plastic interior ...

Type: S-D Variant: UM11 Version: 4BACE3C4PBR4 First registration date: 04/04/2013 Fuel: Gasoline Displacement: 1,229 cc (1.2 L) Power: 51 kW, or about 70 hp Fiscal power: about 4 HP Number of cylinders: 4 Transmission: manual, 5-speed Transmission: Front Wheel Drive Number of seats: 4 Body: Hatchback, 3-door Colour indicated on the papers: brown Environmental standard: Euro 5 CO₂ emissions: 118 g/km Top speed: 165 km/h Operating weight: 1,199 kg Maximum technically permissible mass: 1,470 kg Registration Number: 1EWE356 Papers : Belgian Technical inspection The check indicates that the vehicle complies with the technical regulations. Date of inspection: 13/03/2025 Validity: until 04/04/2026 Reported defects: Miner to be repaired: rear fog lights – faulty light source. Minor to watch for: high beam – orientation of a lighthouse ou ...

CAP.: 10 000 BTLS/H OF 1.5 L,

The blower is with side admittance completely with impulse.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

; ready for operation

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

The blower step is general-outdated and available immediately. the rotary piston blower can be also delivered completely.

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

see pictures

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

The fan speed is refurbished, can be supplied as a complete unit.

; ready for operation

; ready for operation

Hammer muehle with blower, filler hopper and easily changeable sieves for the wuenschte fineness of the grinding material. Hammermuehle KH3 11 kW

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

Auxillary blower for Wichmann WX12V28 Allweiler SNBA-M280GR43C9.2/1w12

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 501 Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock; ready for use

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use