pet blow moulding used for sale

inner diam. 350 mm.

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

Blowing machine Sidel Type: Universel SBO 14 with 14 cavities Year of manufacturring: 2007 Output: 30.000 bph Formats: 0,5 ltr. (12 g) and 1,5 ltr. (25 g) Neck size: Alaska PCO 1881 Preforms in the machine: 242 including air recovery including Lanfranchi preform tilting device, built in 2007 including preform hopper including preform feeding system including Aski Model LCA-E cooler, built in 2013

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

Type : UMA90 Année : 1996 – Révisée 2014 1 tète – 1 poste Diamètre de vis : 120 mm Tète 18 litres – 16 kg Capacité production : 450 kg/h Control Paraison : 100 points Passage entre colonne : H1200 x V2100 mm Course d’ouverture maxi : 1800 mm Force de fermeture : 90T Epaisseur moule mini : 405 mm Possible fût 100l

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100

diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300

diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300

diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470

diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330

diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t

diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150

bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130

diameter range 6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300

diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 120 mm max. cut-off length 160 mm output pieces/min 125

diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140

diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90

diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450

diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70

diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105

diameter range M8-M12 number of dies 4 number of stations (incl. cut off) 7 max. thread length 75 mm shaft length under head 20-125 mm cutting length 30-150 mm max. width acros flats 22 mm press power 1500 kN

good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm

bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

bushing cut-off , PKO , IFO diameter range 6-10 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 75 mm shaft length under head 50 mm output - pieces/min 285 max. width acros flats 17 max. thread length 50 mm

Closed cutter , IFO , PKO , with thread roller and pointer diameter range 6-16 mm number of dies 4 number of stations 7 cutting length 340 mm shaft length under head 65-300 mm output - pieces/min 60-90 max. thread length 65-150 mm press power 150 to

bushing cut-off diameter range 16-27 mm number of dies 4 number of stations 7 cutting length 50-240 mm shaft length under head 30-180 mm range of thread length 95 mm max. width acros flats 24-41 mm output - pieces/min 84

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm plane of stroke 123 mm output - pieces/min 150

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 5 mm number of dies 6 number of stations (incl. cut off) 7 cutting length 35 mm shaft length under head 25 mm output - pieces/min 400 press power 15 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 190 mm shaft length under head 175 mm output - pieces/min 120 press power 220 to

diameter range 8 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 65 mm shaft length under head 54 mm output - pieces/min 350 press power 56 to

bushing cut-off , PKO , Forma packs diameter range 11,8 mm number of dies 5 number of stations 6 cutting length 3 - 45 mm shaft length under head 50 mm output - pieces/min 85 - 255 press power 50 to

bushing cut-off , PKO , IFO , Slug feeding possible diameter range 16-34 mm number of dies 5 number of stations 6 cutting length 210 mm shaft length under head 180 mm output - pieces/min 55-80 press power 450 t

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 127 mm shaft length under head 90 mm output - pieces/min 200

bushing cut-off , PKO diameter range 16 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 160 mm shaft length under head 125 mm output - pieces/min 150

bushing cut-off diameter range 8-18 mm number of dies 5 number of stations (incl. cut off) 6 shaft length under head 120 mm cutting length 140 mm output - pieces/min 60-170 press power 100 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 130 mm output - pieces/min 86 - 130 press power 220 to